63 modeli
YOU WILL HAVE TO BRING DOWN THE MODEL A LIL BIT BECAUSE SOME PARTS OF THE TRIDENT WILL BE LEVITATING . DO NOT PRINT AT FULL SPEED IT WILL 89% FAIL TO PRINT SINCE IT HAS A LOT OF LITTLE DETAILS , images soon since i lost my phone I WILL…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Extra hook for ladder. Supported by Romsdalen 2.0 rooftop tent ladder, but this should also fit any similar ladders. To be placed on the step of the ladder. Print settings: 0.20mm Structural Material: PETG 0.4 nozzle Infill: 25%
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extra hook for storage that fits on the ladder poles. Supported by Romsdalen 2.0 rooftop tent ladder, but it should also fit similar ladders. This hook fits below step 2 and 3 counting from top, where the poles are 40mm and 44mm. The…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement. Safety support for gas spring. Supports Norse Camp - Romsdalen 2.0 rooftop tent, and possible others. Print settings: 0.15mm Structural Material: PETG 0.4 nozzle
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The FMS 800mm Beaver wing is secured by a plastic quick-release wing key located at the rear of the wing. Since this small part can be easily misplaced during transport or field assembly, I designed a replacement that can be printed at…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Spartan USB/mSD holder Remix
If you have a CR-Touch, the Satsana remixes that have the integrated BLTouch mount will NOT work! The position of the wiring connector is right between the 2 mounting screws. This is also for the Ender 3 V2 using the Micro Swiss Direct…
This is rack for SD and mSD cards in one solution 😊 Let it go print 🥰
MSDEXP Dust cover. Slides down over the the cartridge connector in the MSDEXP and protects it from Dust. Purchase the MSDXEP from https://mobiusstriptechnologies.com/product/msdexp/ If you would like to buy the MSDEXP Dust Cover and don't…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
You can see it in action here at Atomicwarlords http://atomicwarlords.blogspot.com/search?updated-max=2021-04-01T12:00:00-07:00&max-results=4&start=48&by-date=false
Update (28 Feb 22) - Added MGN12H adapters for the Y-axis. I don't have extra MGN12H rails/carriages myself, so if you print this, please provide feedback. I designed it around the same mating surface of the MGN9C rail so it should work…
This model can be tricky to print and assemble because of the fragile corners of the “shell” piece. At 100% this model will be fairly large. It can be printed as small as 50% (pictured) but it is more difficult to build at that size…
Made this to further “pimp” out my mower. Its modeled to about full size, so can scale to install in anything from a mower on down to your kids lil red wagon, or battery powered ride on. 75% of full works about right on a Cub Cadet Mower!…
Just a remix for a friend who requested one not angled. Category: Automotive
I liked the original USB holder but i wanted more storage and a Gridfinity base. The magnet hole size for the base is 6x2. The storage design is from https://www.thingiverse.com/thing:5291498 but i am not sure of the source of the…
I designed this to have the usb and MSD for Anycubic Kobra 2 neo nearby. It is adapted to the top bar of the printer ----------------------------------------------------SPANISH----------------------------------------------------------- he…
Remix from RGBtoHDMI model for your microSD card (RGBtoHDMI ou Pistorm600)
Slight update to my Avengers coaster design to make it match the updated logo for Avengers Doomsday.
Mini marker with Doomsday Discs logo. Designed for Team Doomsday members and fellow fans. scale may need to be adjusted NOT FOR COMMERICAL RE SALE side note: Please dont be that person online offering to print these for monetary gain…
This clock is just for fun. I'm not making any statements. You interpret this as you see it. The wording can be put in any order. I set the order as I see it. The hands are mobile. There are only a few minutes settings before midnight.…
Modular USB, USB-C, mSD, SD card holder. Print only the modules you need, print them in different colors. Use the “Gender Bender” to put the slanted front end on the rear end too.
"A time of unprecedented danger: It is 90 seconds to midnight" - Bulletin of the Atomic Scientists, 2023 The current concerns about nuclear risk, climate change, biological threats, disinformation and disruptive technologies induced a…
A 3d Print replica of the Doomsday Clock for the boardgame Andromeda's Edge for the Plutonian Empire Faction. There are two versions, one that utilizes a token and the other that uses a clock-hand. Also, there is a 3MF (colored) and STL…
small zipper pull / keychain for DG bags. Designed for Team Doomsday members and fellow fans. I print these in TPU and PETG. NOT FOR COMMERCIAL SALE. side note: Please don't be that person online offering to print these for monetary gain.…
Soporte de memorias usb, sd, msd para pegar en el lateral de la pantalla del pc con cinta de doble cara.
Thanks to Print2Win for https://www.printables.com/model/116678-microswiss-ender-5-directdriveallmetalhotend-assem it was a lot of help getting the design together.
Got tired of other models out there not being exactly what I needed. This design is meant fill those gaps. It installs onto the backplate of MicroSwiss DirectDrive Ender 5 Plus printers that are going through Linear Rail Conversions. I…
This is a 10-32 threadable nut with a flat blade screwdriver slot at the top for tightening. I designed it for a location where there is very little room to get a wrench around a traditional nut, so it was easier to make a part to get it…
i revised my multi holder to clip on to the side if a 1/5 inch thick table. it holds a combination of 60 micro sdcards and 6 usbs and 6 sd cards. the curved cutout allows for easier access. i included a step file so you can modify it for…
hold 12 usb or 48 sd or 12 sd cards and any combination thereof. snugly fits 3/4 in thich table/plywood use supports.
UPDATE: Four versions are now included, two that have accommodations for a LoRa antenna, and two “full body” versions without the antenna gap. Also, I've added a modified middle plate without the lanyard attachment (note that this…
Not much to describe. Works as pictured. If you're seeing the other Skadis holders in this image and want those instead, check my profile. Designed for use with T-slot nuts. I personally like these , but in theory you can use whatever
For 2025, the world moved one second closer to doomsday, making it 89 seconds to midnight. If you would like to support me or sell prints of my designs, please join the appropriate memebership at my Patreon:…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Resized hole from an 18mm ABL and repositioned a new hole for 12mm EZABL. Home (nozzle) offset: X13 Y7 in cura Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 35% Filament: Overture…
pls like and follow and dowload also pls leave a review it would help
This cap will work with all Platinum MSD1500B mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.…
I've refined this a couple of times for my preferences, but I'm leaving some of the old files here as well in case other people prefer those. The latest version can accomodate sleeved cards and tokens in coin capsules, and all materials/…
End cap for the tension pole. Supports Norse Camp - Romsdalen 2.0, and possibly others. Print settings 0.20mm Structural Material: Fiberlogy FiberFlex 40D (or other flexible materials) 0.4 nozzle Infill: 15%
Needed something easy to load filament on this abomination. This was the result. Just uses M3 nuts on the back, I forget the bolt size but when I tear it down I'll update this with the sizes I used. If you have a little kit of…
it's a design for momsday or just as a gift for her birthday.
organizes usb, microsd, sd, and cables has maximum even force to clamp to table has threaded posts for 18mm table i included a post for 45mm table (u will need 2) can hold 35 cables can hold 54 micro usd cards can hold 12 usb thumb drives…
the USB,SD,MSD holder can msd usb and sd holden.
When you are out of spares or when you require a different hardness than the original plastic. Default material would be a nylon filament on the textured sheet.
CYCLOPS: DOOMSDAY DOUBLE BIT
Designed for Märklin BR-216 model locomotive. mSD3 speaker adapter washer. The diameter of the speaker supplied with the sound decoder kit is a bit too small... With this adapter, it can be mounted and held in place ! Adaptateur/réduction…
this holds 45 micro sd cards, 5 sd cards, 5 usb drives or any combination thereof. and holds 10 cables. fits 1 inch thick table. needs supports. model is in inches. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Drip stop for the tension pole. Supports Norse Camp - Romsdalen 2.0, and possibly others. Print settings 0.20mm Structural Material: Fiberlogy FiberFlex 40D (or other flexible materials) 0.4 nozzle Infill: 15%
Case für das MSD2IEC SD-Kartenmodul für den Commodore C64.
⚒ This project was not planned in advance, but it marks the beginning of a new series: “Subscriber Requests: Brought to Life.” One subscriber asked: "Could you model a case for the RadBoy doomsday Geiger counter?" Official documentation…
"Father, all my life, I have answered every call: to honor, duty, to war. Now fate has given me something I never sought: a child. A life untouched by the storm. Lend to me the strength of the All-Fathers, so that I might fight once more,…
Mini sized (Benchy-like) model of Japanese Marine Self Defence Force Destroyers. The data may be modified without notice. Supports are needed for printing.
a model of the doomsday logo for people who don't have a multi color printer.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
organizes usb, microsd, sd, and cables has maximum even force to clamp to table has threaded posts for 18mm table i included a post for 45mm table (u will need 2) can hold 35 cables can hold 54 micro usd cards can hold 12 usb thumb drives…
A 3d Print replica of the Doomsday Clock for the boardgame Andromeda's Edge for the Plutonian Empire Faction. There are two versions, one that utilizes a token and the other that uses a clock-hand. Also, there is a 3MF (colored) and STL…
"Father, all my life, I have answered every call: to honor, duty, to war. Now fate has given me something I never sought: a child. A life untouched by the storm. Lend to me the strength of the All-Fathers, so that I might fight once more,…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Joining the trio of Iconic Ships which opened the Armada series, here's the Decepticon Flagship Doomsday! Adapted for the Iconic Ships collection and sitting on the standard base, the Doomsday is now ready to go on hot pursuit of the…
![[Iconic Ships Series] Doomsday from Transformers Armada](https://media.printables.com/media/prints/1046540/images/7932358_cef871b9-92fe-49ec-b2e6-304d8a2cc8f8_b136b4e7-830c-4fe3-8682-3f0b798feef3/doomsday_fs.jpg)
