375 modeli
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
This hanger will hold the Dewalt DCN660N 2nd fix finishing nail gun printed in PLA can be done with PETG Nylon, Carbon fibre ect… depends on your preference with 50% infill and the perimeters at 4
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a case that houses the N6ARA Morse Code Paddle (The plug model) and the adjuster that comes with it. The clearances are so that both the key and the adjuster should hold in place with friction. You will most like need to do a…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Base case for NUCLEO-N657X0-Q development board.
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
Hero Me Gen6 ARCHIVE Updated Aug 3rd, 2023: Hero Me parts selection and illustraited assembly documentation for this archive is now available via a Printables.com Club Membership. Check it out here:…
Printing: No supports needed. This can be printed in a wide variety of materials. Purchase: Also available at kytor.com/store/product/n64-controller-display-stand/ Recommended Materials: PLA MAX Light Gray DURAMIC 3D PLA Plus Black or…
This pouring spout is designed for canisters with DIN threads , commonly found on 10 L and 20 L canisters . An integrated air channel allows air to flow back into the canister while pouring, resulting in a smooth, controlled stream and…
This replacement cartridge bracket will let you play Japanese titles on your US N64. Simply disassemble your N64 and replace the existing cartridge slot bracket with this universal bracket. It’s that simple. Install Guide Updated design…
Update 25.07.2026 I've added stands of varying depths, from 2 to 12 cards. There's also a version with the Super Famicom logo. ___________________ Hello Everyone, At the request of two users I have prepared 3 new game stands for the NES,…
Based this model off of measurements of a real one. Designed this for a dust cover for your N64, or you could mock up some fake labels and make a real looking cartridge for display if you'd like. If you want the raw files for a project…
The parts were modeled from a beat up Star Wars Racer cartridge using trusty rusty calipers. Different from original in these ways: There are M2 nuts and screws for the PCB and shielding. Use 2 standard M2 nuts and 2 M2 x 10mm screws…
These were modelled after the original pieces by hand (painstakingly calipering each dimension, hahaha). But I have yet to test/print them - when I do, and find any issues, I will update the models as needed. Until then consider it a WIP!…
Hello, Here is my remix of DIN61 cap. I added 3/4" thread for tap
This is a simple tool to help remove the Nintendo 64's RAM packs. I designed this because I no longer have the original RAM removal tool that came with the expansion pack. Printing Settings: Print 100% infill on its side PETG is…
In the mid-1950s, the United States had an unconditional superiority over the USSR in nuclear weapons, although thermonuclear charges had already been created in the USSR at this time. (WIKIPEDIA) also called Big Ivan , a Soviet…
This model is designed with inspiration from the Holy60 but for the Monsgeek FUN60 Pro . I don't know if the case will work with other PCBs. The case does not account for the battery, as I don't use the wireless functions. Printed on an…
The holder is built modular, so you can built it in every desired length. There is an part for the front, middle and back. These parts are connected through printed connection pins. The holes for the connectors are 4.1 mm and for me 4 mm…
For a project I am working on I needed to modfy a Nintendo 64 rumble pack. These parts cost a little too much to keep buying them to modify. So I set out to recreate and print the case myself. The fit into the controller is a bit snug.…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
A fun, compact take on a classic design. Supports are required for the top part. I’ve also added two small braces on the left side, near the USB and Ethernet openings, to help prevent warping. These can be easily cut off once printing is…
3D model of the Nintendo N64 Logo I modeled based on scaled proportions pulled from the logo image on the from of the N64 console. Modeled at 100mm x 100mm x 100mm, print in pictures is printed at 25% scale.
A display for your N64 games. Holds 5 games. If you don't have good bed adhesion, use a brim or mouse ears. Print the face shield lying flat and use a filament change for a different lettering colour. I used 20% lightning infill. Use a…
This is an updated/remixed version of elhuff’s files. This is for the Raspberry Pi 4. This also has two versions of the game cartridge. One is just a “prop” cartridge for looks, while the other is ported out the rear of the cartridge to…
Holds 6 games with "Nintendo 64" labeled on 3 sides
I really like my models to be scaled correctly so I sat next to my gaming cartridges using them as reference when making this. It still isn't perfect but I 'm happy with it. Open to feedback. Will also be working on some of the other…
A Skadis compatible mount for showing off the Switch compatible N64 controllers. Uses the T-Clip system, you'll need to visit the original model via the remixes tab to grab the t-clips you'll need to attach this to the board. Best printed…
This version builds on the RPi 2/3 model with a few improvements: a slot for a fan, a removable cartridge, and a pre-drilled hole for an LED on the front. Supports are required to print the top part. Two braces are also included on the…
Based on the Joussot's shape. It is recommended to print it in PETG wich is less breakable compared to PLA, adjust the size around 24cm or that fit your needs. Use a minimal infill of 20% with Gyroid, but its better to infill it to 70%…
These are direct replacement feet for the Nintendo 64. Printer Settings: 0.2mm layer height At least 20% infill
This wall mount for a Nintendo 64 controller plugs into the memory card port and matches the footprint of the headphone mount used in Regency conversion vans. A piece of electrical tape can be applied to the embossed area of the memory…
These are drop in replacement cartridge doors for the Nintendo 64. Printer Settings: 0.2mm layer height At least 20% infill Optionally, adjust infill direction to be along the same axis as the doors run so the top layer matches the axis
Do you have too many video games and boring walls!? Then you have come to the right place! This wall mount rack is designed specifically for N64 games with the bottom piece being branded (whether you can do multi-color or single color…
Remixed model with pins printed as a separate piece to ease support removal and facilitate multi-material pins. I've have been making giant N64 cartridges using the original model by Michael Winston. I decided to remix the model and print…
I wanted a way to store some n64 games where they are held firmly but also have it possible to see what game is behind the one in front of it without having to touch each cartridge. This stand holds the games at an angle with enough…
The Memory Pak stl available didn't seem to fit quite right, and was pretty low poly, so I rebuilt it from scratch in CAD. Step and Fusion source files available.
I designed a Mario themed cartridge stand/holder, the stone pattern should be the same as in a mario game. You are able to print this stand/holder in single color or in Multicolor (MMU). I hope you all like the model as much as I do :)…
These were modeled after the original by hand. I have yet to test/print them - when I do, and find any issues, I will update the models as needed. Until then consider it a WIP ! Update 12/25/21 I have been testing and printing this over…
Nintendo N64 Cartridge Angled Stand Hey maker! 👋 A compact, angled stand for storing your Nintendo 64 cartridges neatly and dust-free. Features: Angled design makes it easy to read game labels. Compact storage for multiple cartridges.…
Button replacement for Kobo N647 (or similar) You will have more luck printing this with a multi-material printer. For me I printed the main body in PETG and "soluble-supports" in PLA…
Mod Overview: https://youtu.be/KE2aXAPzVO8 Houses the power management boards for a USB-C mod for the Nintendo 64
V3 contains fixes that align the throat a little better, and no longer catches the flaps randomly. This is my take on the N64 multi region mod, the other ones I found seemed to be tricky to print, this one only needs supports under the…
Printable logo for Smash 64. It's currently split into two STLs, one with color swaps required mid-print (for the Smash word). The other is just the "Super Bros" and I glued those to the first print. I'm sure this could be set up better…
This is my attempt to make a grip to make the win600 a little more comfortable and usable. Its not perfect by any means, and likely would be best used with stick covers, but it is a large improvement over stock. The fit is intentionally a…
Bring your Nintendo 64 nostalgia to life with this collection of Cartridge Cover Designs 🎮✨ Designed specifically to fit the N64 cartridge keychain model, these covers will transform your prints into true retro collectibles. 🧩 WHAT YOU…
Originally published here: Google Pixel 6 gb7n6 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file…
First iteration of a hollow N64 game cartridge for use of rasberry pi projects, giving game motherboards a new life or many other projects. Category: Video Games
Printed on Ender 3V2 with PLA+ filament Infill of 30% but Perimeter of 4 Printed on the side with supports
Making new fuel, oil, or cooler lines using Stainless Steel AN style lines? Here is a clip to hold the line in place. There is a countersunk hole, so an M5 flathead screw can be used to mount it. I use PETG at .28 MM layer height.
Main Features: Compatible with HeroMeGen6 which has 9mm nozzle offset. No extra parts/hardware needed Enough clearance to avoid gantry Design is closely based on Speed Drive. Print: Print with supports. Print with enough infill / wall…
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
Files to Print Required Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display. Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them…
Some one requested an N64 version of the switch game case I designed!
ReN64 PSU Case v2 A 3Dprint-Case for the ReN64 PSU Case designed by REXUS NEXUS and sold by game-tech.us. 4x M3 square nut 4x M3x8 Socket Screws
Elongated Nut DIN6334 - M6/M8/M10/M12/M16
Remix of the SNES (PAL & NTSC) and N64 cartridge holder with flip option made by @PawelN_302162 The provided 7 cartridge model was too small for my needs, so I modified it to a 13 cartridge holder. Then I figured: Why not provide…
These are basic but quick to print display stands I created in order to display CIB Nintendo games that are in a protective plastic cover. I printed at 0.2 with PLA on my prusa mini and each set took around a half hour to print but they…
N64 (plus N64-Boomerang) Controller Display Shelf based on the swappable wall mount. So you can move them around as your collection grows. There is enough room behind the controller for the wire for easy storage. I printed with "tree"…
Here's a GoPro chin mount I made for a friend. Please use cautiously and use strong adhesive/-tape!!! Suggested 100% infill and done in PETG, ASA or other strong materials.
This is a quite large N64 Game stand, to fit on an ender 3 you must print on it's side at an angle, this makes the overhangs short enough they shouldn't be a problem. The shelled model uses around 370 grams of filament depending on your…
An easy print and fit starting point for replacing your fog light to duct air to your brakes. Mounts in the same way as the stock fog lights so shouldn't need any fettling or adjusting. It's a tight fit, but I made it to fill all the…
Remix of the N64 cartridge trays, fitting 10 positions instead of 6.
N64 USB-C PD V2 overall better design then V1
A dust cover fitting a single N64 Cartridge. I used this cartridge model by ejpman for the base measurements but needed to tweak them a little bit to get it nice and snug. I added the models with the titles of the games I have to the…
I needed the norm finger according to IEC 61010 specifications for pre compliance testing. Print the handle and the finger separately and glue them together. Make sure the finger is seated all the way. The final length should be 80mm. For…
The compartments have been sized to fit cartridges without dust covers. Multiple towers can be linked together and are designed to fit perfectly inside a standard 30" Billy Bookcase shelf space. This allows you to place a total of 6…
A basic case for an ESPHome air quality sensor I made using a Sensirion SEN66 and XIAO ESP32C3. There are other cases for this combo out there, but the ones I saw incorporated a screen which wasn't relevant to my use case as I'm just…
As with my other dust covers, this prints well in vase mode or with a couple perimeters for extra sturdiness. The rounded corners don't fit QUITE as neat as I would like, but the odd compound corners on the n64 cartridge caused me some…
I like my new car's wireless CarPlay feature, but the added power drain made me wish I had a wireless charger. One charger for the little cubby under the headunit and a second in the center console tray makes a nice pair of chargers for…
not sure who would want to display their n64 vertically, but I personally needed for the n64 to stand vertically next to my crt and no one really made one I liked hence making the stand I used Wesk's 3d scans repository:…
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Replacement navigation buttons for e-reader Kobo N647. Print with the external area towards the bed, with supports for the tabs that keeps de buttons inside the case. Can be printed with any material.
A simple holder for N64 games. Space for 8 cartridges.
These are a replacement door bins for LG LSC27925, LSC27937ST fridges, replacing LG part 241H / MAN61844401 / AAP72911202. I printed this on my Sovol SV06 and it took up nearly the entire 220mm x 220mm print bed, so I think you'll need a…
Looking for a better way to display your Nintendo 64 game cartridges? This stand elevates your games to not only look more appealing when not in use but also makes the games more visible and easier to see making selection and play easier.…
Not mantained anymore Switch to this model instead, which I made in CAD myself and it is easier to mantain and create newer versions (and you can also do it yourself because the step files are provided)…
A minimal case for N64 Controller Pak. Light fit so it is better to glue it together.
This is a remix of some pieces from the Hero Me Gen6 Master Suite by MediaMan3D. I took the base and gantry adapter for the Micro Swiss direct drive Ender 5 plus and remixed it to be magnetically attached. I'm sure it's not perfect, but…
Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…
Model of EMP N6964 9T 230kv Brushless Motor I use this model as a template to build a motor mount for an RC aircraft
no supports needed you do need infill
A crude and simple remix to remove the expansion holes and close the back to make it a simple single cartridge stand.
I am using a cheap N600 generic flat burr grinder and the V2 is designed to slot the bottom side of the plate against the bottom bar
Holds the Nintendo Switch Online wireless N64 controller. 4x2 on a Gridfinity grid.
Do you find yourself looking for ways to display all of your Nintendo Switch games you've collected over the years? Let's not hide those suckers away in storage! This model is a 60% scale (mostly accurate) N64 game cartridge that fits a…
3Dprint-Case with USBC-PD for the Nintendo 64. 1x PDC004-PD 12V 1x LM2596S https://de.aliexpress.com/item/10000000656280.html 1x Connector from original PSU 4x M3x4x5 Inserts 4x M3x8 Socket Screws
Project .3mf file included to allow assigning colors and adjustment. Individual parts can be printed separately in different colors and glued together or onto the base part. All parts are only 1mm tall so scale Z as needed. Important: Be…
Da ich keinen Simplen Controller Mount gefunden habe , hier mein Entwurf. Makes + Verbesserung Gerne Kommentieren. Since I couldn't find a simple controller mount, here's my design. Makes + improvements, feel free to comment.
I purchased a Topton N6005 fanless mini PC, but it runs quite hot, when I have it hidden away in a cabinet. So I designed a very simple fan mount for a 120mm fan in Tinkercad - it is held in place with friction. Print two pieces, mount…
New D-pad replacement for the Kobo Wireless ereader designed to fix some issues with existing models out there. I saw two existing models out there for D-pad replacements and was not satisfied with them so I designed my own. It is…
Only for USB-N64 Controllers. Does not work for Original N64 Controllers.
Remove barrel power plug hole for USB only. Bottom and original model https://www.printables.com/model/255523-ren64-psu-case-v2/remixes
Adapter to mount the XIAOMI Mi Computer Monitor Light Bar to the LG 32GN650-B monitor. Adapter doesn't change position of the lamp. Remove built-in supports and install the mount and adapter to the monitor using zip tie.
This wall mount bracket displays your N64 games while being barely visible. Does not need supports
Infill 7.5 to 20% , PLA/PETG, 2 or 3 walls I used 2 walls and 10% infill for a material cost of 41g! (using PETG)
Fits the Nolan N60-6 helmet like a glove, you will need additional 3M VHB 4991 2.3 mm adhesive. For best results use PETG for added strenght and the following settings: 4 walls 45% Infill Enable support
This is an organizer for 2020 to present Subaru Outbacks (Gen 6). It includes space for wire organization if you like to use the 12v plug to charge your phone. There are designated spaces for a few pens, cards, and a slot to hang a pocket…
