Liczymy pasujące modele…
Nobsound Amplifier Holder with a mount pattern that fits 8020 compatible extrusion popular with Sim Racers. Will hold the amplifier vertically on any 8020 extrusion Designed to use M6 countersunk bolts Bolt spacing is 1.5" apart
This is a remix of NEON's model, but mine You can screw to side of Your 8040 simrig profile.
Nobsound sim rig holder. Made to fit a Nobsound NS-10G to an 8020 (or any 80 series)piece of extrusion. Slides into extrusion with the tabs and is a tight fit so requires no T nuts. Mounts the knob and button at 90 degrees to the channel…
A fastener for the Nobsound NS-20G to your sim rig. Fits 40x40mm extruded aluminium, and fastens with 6mm T nuts and screws
Holds your amp on an aluminum profile sim rig. I had to print at 101% to get a good fit.
Was recently introduced to an alternate bass shaker setup for my 8040 simracing rig. Using the Nobsound NS-01G two-channel amp along with the Dayton Audio BST-1 Bass Shaker, you can get tactile feedback when gaming. Attaching the shaker…
This is a simrig holder for the famous Nobsound NS-01G PRO Mini Bluetooth 5.0 Digital Power Amplifier. This Amp is quite commonly used für bass shakers. Link to the amplifier: https://amzn.to/4ucmMGd * Reccomended settings 0.16mm layer…
Nobsound Amplifier Holder with a mount pattern that fits 8040 Bosch Rexroth compatible extrusion popular with Sim Racers. Will hold the amplifier in position bolted to the side of a sim racing rig or anything to be honest.
Nobsound NS-01G Pro Amplifier mount designed to clamp onto the playseat challenge tubes (25mm diameter)
Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia pipes) This is a remix of… https://www.thingiverse.com/christhorn/designs just added a mount for the plastic shelves…
A simple mounting bracket for the Nobsound NS-01G Pro USB amplifier. Use two M5 button head screws and some hammer head nuts to mount this to a T slot profile. I printed this on a Bambu Lab P1P with 0.2mm layer height in PLA. It's a snug…
Modified https://www.thingiverse.com/thing:5093310 to accurately fit my Sim Lab 8020 sections and rear G3 screw holes
print with tree supports see orientation picture. Bolt holes accept M5 or M6 shoulder head screws.
This is a 3d printed Nobsound NS-01G Mini Amp Mount. The holder is designed to work with the Nobsound model# NS-01G mini amp, which is a highly recommended inexpensive amp for powering transducers for sim racing. It may also work with…
RSEAT P1 NobSound Mini 2x50W Holder Note my other models for RSEAT P1! I printed the parts with regular PLA, standard 0.2mm profiles, 2 or 3 walls, it doesn't really matter because the models are thin-walled. (ca. 2mm) Glue the two parts…
I've used the Nobsound G2 100 Watt Mono Amplifier to drive 2 bodyshakers using the pre-out subwoofer channel my receiver provides, so I've made a mount for it as well. Note: The whole frame was made from dimensions found in the Amazon…
Printed at 0.2mm, 4 wall and 40% infill
I searched for an enclosure for my MC 1022 but found nothing, inspired by Vienna3D's Case for the MC 102 ( https://www.thingiverse.com/thing:4292874 ) After making this, I wanted it to stand on my Desk and get the cables somewhat sorted…
The holes are 3mm in size with a 1mm deep 6mm wide countersink. The model has a snugg fit
I needed more height out of the Nobsound (Douk audio) spring isolator to lay a piece of aluminum across for a desktop amp rack/shelf. The spring isolator is made for turntables and audio equipment, and probably doesn't make a different…
I'm not an audiophile but wanted a small amp to power some speakers around my house and ended up with a few of these low cost Nobsound NS-01G amps. I'm sure the audio quality isn't great, but if you're looking at this model you probably…
!THIS IS NOT FOR THE NOBSOUND MINI AMP! I cheaped out on a variant of a random AliExpress one (Daakro): https://pt.aliexpress.com/item/1005008835 It fits an 8040 aluminium extrusion. I downloaded a random CAD and did this in 10 minutes,…
Just a simple design to stack the Nobsound NS-10P and NS-08E headphone pre-amp and amplifiers. I've had these on my desk for years and was never happy with them sitting side-by-side, so I finally decided to print a solution. I removed the…
!THIS IS NOT FOR THE NOBSOUND MINI AMP! I cheaped out on a variant of a random AliExpress one (Daakro): https://pt.aliexpress.com/item/1005008835 It fits an 8040 aluminium extrusion. I downloaded a random CAD and did this in 10 minutes,…
For more information please check out the related video on my YouTube channel.
A case for the Nobsound Little Bear MC1024 (2022). The cases created by @atypicalengineer808 and @Vienna3D_64967 for the MC102 versions of this case were a great starting point in creating this one so thank you for you work on those…
Holder for the Nobsound PSU on an extrusion profile with a 8 nut.
Using this little amp to power my garage speakers. It's convenient to have it mounted on the pegboard.
Mount for Nobsound 78mm wide version with big knob. (see photo) Changed hole pattern for 80 wide two slot profile. 6mm socket head bolt recess. Added fillet and some material to the sides.
Remix for the MC102 version of the Douk Audio Nobsound LIttle Bear. This is the newest version of the MC102 which has the extra in/out port at the back so that all three connections can be there (with nothing connected on the front). I…
Case for Nobsound Little Bear MC102 Audio Switch. Buy the Nobsound Little Bear MC102 here if you want to support me: Amazon The design was still heavily inspired by aTypicalEngineer808s design - Thank you for the great starting point! The…
Simple bracket to mount the Nobsound power supply to an 8020 aluminum chassis. Uses M6 hardware and is a snug fit so no rattling. If you'd like to donate for my efforts, you can do so here. 🙂…
