P
PrintablesJeroen3
TinySA Ultra box inlay
Simple inlay to keep using the original TinySA Ultra box to store it in. Update 2024-09-10: added 5mm offset top insert, so you can keep your sma adapter attached.
- Pobrania
- 117
- Polubienia
- 13
- Ocena
- 5
Wyniki wyszukiwania: nys
140 modeli
P
PrintablesLuboš Hejč
Kohout ke kanystru
Při slicování hlásí zvážení zapnutí podpěr. Není potřeba
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJona B
Two Bunnys (Easter decoration)
When looking for Diyable easter decoration i didn't find anything, which i liked. I could only find an image of something similar to this. As there wasnt any Instructions or files, I just made something similar and this is the result. i…
- Pobrania
- 2779
- Polubienia
- 938
- Ocena
- 4,93
P
PrintablesToon
TinySkatepark finger board park
Fingerboarding is so much fun, this project allows you to print a modular skatepark. All models are made with 3d printing mind so no small features or difficult overhangs. All parts are compatible with each other. Combine and mix…
- Pobrania
- 1834
- Polubienia
- 152
- Ocena
- 4,92
P
Printablesgadjet
Stand for TinySA ULTRA Spectrum Analyser
A simple stand to hold a TinySA ULTRA, there is a slot at the bottom to allow a rightangle USB C charge cable through but this may not fit your specific cable. This is a work in progress and I plan to create another one with a different…
- Pobrania
- 304
- Polubienia
- 17
- Ocena
- 0
P
PrintablesJace1969
Destinys Titan Full Body Armour
Another great file found on the internet and converted to a printable format. Sizing will need to be looked at but the overall project will just need slicing up to fit your printer. Should be a great costume, Cheers Jace Print…
- Pobrania
- 288
- Polubienia
- 75
- Ocena
- 0
P
PrintablesDeadlisins
Easter Bunnys With Eggs Decoration
Scale to your own desire! Commercial License Available on my Patreon- patreon.com/Deadlisins Check out my Profile for more Prints! This 3D-printed Easter decoration features an elegant silhouette design with two adorable rabbits sitting…
- Pobrania
- 284
- Polubienia
- 49
- Ocena
- 5
P
PrintablesOutFoxD
IKEA NYSJÖN feet
IKEA NYSJÖN: https://www.ikea.com/at/de/search/?q=NYSJ%C3%96N
- Pobrania
- 245
- Polubienia
- 19
- Ocena
- 4,5
P
PrintablesSitsero
Dionysus Bust
🍇 Dionysus Bust – The God of Wine, Ecstasy & Revelry 🍷 Bring the spirit of celebration, mystery, and divine indulgence into your collection with this Dionysus Bust ! Recognizable by his long, flowing hair and the wreath of grapes and ivy…
- Pobrania
- 219
- Polubienia
- 42
- Ocena
- 0
P
PrintablesPatrick van der Leer
tinySA Ultra+ rugged box
First version of a rugged box for the tinySA Ultra+. The lid is designed for the blue 30cm version, 2 of them fit in the lid. They might not stay in so I jam a bit of foam on top of it. I haven't figured out how to design it so that it…
- Pobrania
- 207
- Polubienia
- 14
- Ocena
- 4
P
Printablesjeepin95
NanoVNA and TinySA Box
With some inspiration from a few other box designs I made my own semi-rugged box to contain my NanoVNA and TinySA together and keep them a little protected. I integrated a ledge for the tray to sit on which helps to hold the devices in…
- Pobrania
- 186
- Polubienia
- 23
- Ocena
- 0
P
PrintablesDamianB2
tinySA ULTRA Stand and Stylus
This is a tiltable stand/holder for the tinySA ULTRA spectrum analyzer. The tinySA ULTRA is a very nice spectrum analyzer but is designed to lay flat. This stand allows you to tilt it to make it easier to use on the bench. It tilts from…
- Pobrania
- 170
- Polubienia
- 15
- Ocena
- 4,5
P
PrintablesEmemell
tinySA Ultra desktop stand
The tinySA Ultra neatly pops onto this stand, held in place by small lugs that fit into the screw holes on the back of the device. It leaves all the controls accessible and has enough clearance for a small USB C cable at the bottom. Make…
- Pobrania
- 148
- Polubienia
- 13
- Ocena
- 0
P
PrintablesДенис Мищенко
Kitchen knife block (Denys version)
I bought a new knife and my current holder is not suitable. Was looking for something which is easy to print and small, but found that most of the ready models are made of a single piece for 6-10 hours printing and usually take a lot of…
- Pobrania
- 129
- Polubienia
- 43
- Ocena
- 5
P
PrintablesSilson07
Matice na kanystr. Canister nut.
Matice na kanystr. Canister nut.
- Pobrania
- 127
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLighting
Nálevka pro kanystr se zavitem DIN45
Nálevka pro 5l kanystr se zavitem DIN45 / pro nalévání kapaliny do hazerů a mlh samostané víčko je možné použít i jako držák trychtýře rozměry víčka : 45mm vnitrni průměr , 32mm díra pro nálevku a trychtýř Tisk: Material : PETG výplň :…
- Pobrania
- 122
- Polubienia
- 10
- Ocena
- 5
P
Printablesyduf
Anyshape Stackable Container
Build customizable stackable container from anyshape. Default shape is rounded rectangle, but could be changed to anything you like (writing a shape with openscad code). I used it to design small container for drawer, for sorting screws.…
- Pobrania
- 120
- Polubienia
- 26
- Ocena
- 5
P
PrintablesJoergH
TinySA ULTRA Gridfinity Einsatz 2x4u4
Gridfinity Einsatz um den original TinySA ULTRA gut und sicher zu transportieren. Der Einsatz ist durch die Gyroid-Füllung weich, bietet aber noch genügend halt. Gridfinity 2x4u4. Passt gut in eine Box 3x4u6 Filament: TPU polymaker…
- Pobrania
- 112
- Polubienia
- 16
- Ocena
- 0
P
PrintablesNoozle3D
Vannystyle Frame Accessories
3D print files for the Vannystyle.
- Pobrania
- 105
- Polubienia
- 9
- Ocena
- 0
P
PrintablesFlynn
NYS Business card embosser roller
***NOTE*** I removed my name "FLYNN" from these files, so it is just a NYS Card embosser with room on the top if you wish to make custom roller with your name on top Print 1 of all STL files except handle Print a 2nd STL file of gear 1,…
- Pobrania
- 105
- Polubienia
- 38
- Ocena
- 0
P
PrintablesStefan Junger
tinySA Ultra Hülle/Etui
Das Etui ist etwas länger um einen “Opfer-Adapter” nutzen zu können. SMA-Anschlüsse verschleißen leider recht schnell. Daher schraube ich grundsätzlich einen weiteren Adapter dazwischen um die Lebenszeit am Gerät zu erhöhen. Zum Drucken…
- Pobrania
- 95
- Polubienia
- 6
- Ocena
- 0
P
PrintablesEnrico
Vannystyle Frame DJI O3 Camera Mount V2
These Plates can fit the DJI O3 Camera without using Standoffs in the front. Only need M3 Nuts and Screws in the front.
- Pobrania
- 94
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSkenna_fpv
Vannystyle Pro Parts
Vannystyle Pro Parts A collection of special parts I use for the Vannystyle Pro frame. Print settings 20% Infill Gyroid Infill Pattern Support On (choose the kind of support form you'd like) Recommended Brim On
- Pobrania
- 89
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJayJay
IKEA NYSJÖN - High cabinet feet
IKEA NYSJÖN - High cabinet feet
- Pobrania
- 88
- Polubienia
- 5
- Ocena
- 5
P
PrintablesPetr
víčko ke kanystru
ztratil jsem víčko , třeba dodat šroubek m4 s velkou hlavoupřípadně podložkou, možno doplnit o Okroužek 35x3
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 5
P
PrintablesЕвгений Попов
Vannystyle o3 pack (WARP)
Для установки крепления камеры o3 потребуется: 4 плавленые втулки M3 высотой 4 мм и диаметром 4,2 мм цианоакрилатный клей. Байонет o3 TX предназначен для ресивера Happymodel EP1Байонет Vista предназначен для ресивера EP1 и антенны Rush…
- Pobrania
- 85
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPenny Blake
Pennys Filament Measuring Ruler
While I found the original model excellent I thought this could be improved slightly, so I added the following Big hole so that it can be hung up when not in use. Curved bottom so it registers better on the spool with no wobble Viewing…
- Pobrania
- 80
- Polubienia
- 25
- Ocena
- 0
P
PrintablesSupernova
tinySA Basic Enclosure — Slim 2-piece, no supports, uses original screws
Description A tidy, low-profile enclosure for the tinySA Basic . I couldn’t find a non-bulky case, so I designed this one as two halves that print without supports and reuse the tinySA’s original screws to assemble. It keeps the footprint…
- Pobrania
- 79
- Polubienia
- 7
- Ocena
- 0
P
PrintablesViper
Dionysos Bust – Greek God of Wine Mythology Statue STL
Dionysos Bust is a detailed 3D printable statue inspired by the Greek god of wine, celebration, theatre and wild nature. The model features Dionysos holding a chalice , with flowing hair, a floral vine wreath, classical draped robes and a…
- Pobrania
- 75
- Polubienia
- 13
- Ocena
- 0
P
Printablesywabiko
TinySine Bluetooth Enclosure v2
(Update 4/12/2019) Uploaded IGES model files for easier remix. This is an updated enclosure for TinySine Bluetooth receiver board series. Improvements: Support for a push button implemented on some boards (to receive calls etc). Quick…
- Pobrania
- 71
- Polubienia
- 1
- Ocena
- 0
P
Printableskrab
Canister lid - Víčko na kanystr
Version 1 Version 2 Version 3
- Pobrania
- 68
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDeeuutee
Glennys Chair
This is a modern recreation of the classic style of minimalist armchair. Either print the cushions and frame separately (no need for AMS), or print all in one colour. It is a one tenth scale chair.
- Pobrania
- 67
- Polubienia
- 12
- Ocena
- 4
P
PrintablesPURI
easter_bunnys
set of different sized easter bunnys NEW! the obj. file is now included
- Pobrania
- 66
- Polubienia
- 16
- Ocena
- 5
P
PrintablesKatFret
Drawer 'woven' Hexagon basket for IKEA NYSJÖN high cabinet
Model This is a drawer and/or basket with a honeycomb decoration for the IKEA NYSJÖN high cabinet. Ideal for bathroom organization such as those pesky loose towels, deodorant cans, cotten wipes, tubes of toothpaste, dental floss.. You…
- Pobrania
- 66
- Polubienia
- 18
- Ocena
- 0
P
PrintablesPaŠe
Box for tinySA Ultra Spectrum Analyzer
A box for spectrum analyzer and accessories
- Pobrania
- 66
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJakub
Fuel can holder scale 1:10 / Držák kanystrů
Držák kanystrů na zadní dveře vašeho vozu. Držák obsahuje dvě montážní plochy s dírou 3,2mm pro přichycení kanystrů nebo vaflí. V horní části se nachází držák spz. Rozměry celku: 55v x 63š Lze kombinovat s kanystry a vaflema které jsem…
- Pobrania
- 66
- Polubienia
- 26
- Ocena
- 0
P
PrintablesTommy
Víčko pro kanystr na benzín + úchytka
Tisknuto v PETG a doporučuji 100% výplň. Mělo by odolat účinkům benzínu. Úchytka tisknuta ve FLEX materiálu.
- Pobrania
- 65
- Polubienia
- 3
- Ocena
- 0
P
PrintablesResin Quest Miniatures
Nyssara Venomkiss, Dark Elf Assassin | 32mm & 75mm Fantasy Miniature | FDM & Resin
Nyssara Venomkiss is the silent blade of the Dark Elf court, an assassin whose name is whispered only after the killing is done. Where soldiers march beneath banners and sorcerers command the battlefield, Nyssara works in the spaces…
- Pobrania
- 63
- Polubienia
- 7
- Ocena
- 0
P
PrintablesUgly Robot
Working Pennyshot Derringer Toy
Scrooge's Shotgun, The Door Knocker, Lincoln's Revenge - the Pennyshot Derringer! A 'working' derringer toy from the videogame Hunt Showdown - a clever, homemade-looking last resort. This does not fire anything - just a fun fidget. The…
- Pobrania
- 61
- Polubienia
- 8
- Ocena
- 0
P
Printablesamulej
RonnyS 7" Touchscreen case for Raspberry Pi 4 + internal fan original screws
Loved the design of RonnyS but didn't have any M2.5 x 16mm screws and wanted to use the original ones that came in the box, so I modified the fan part to accept those. Print without supports
- Pobrania
- 60
- Polubienia
- 4
- Ocena
- 0
P
Printablesyduf
Anyshape Stackable Container + Separator
Add separator for small quantity. Category: Tool Holders & Boxes
- Pobrania
- 58
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPan Wołodyjowski
Tanystropheus
Long-necked Triassic archosaur relative.
- Pobrania
- 54
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBucuCZ
Kanystr (canister) 1:10
Kanystr na expediční auta v měřítku 1:10, je ze 4 částí, které je potřeba slepit. Nejsou potřeba žádné podpěry. Ideálně tisknout co nejmenšími vrsvami aby vyšli hezky kulaté části.
- Pobrania
- 52
- Polubienia
- 12
- Ocena
- 5
P
PrintablesDoubleH
Knysna South Africa 3D Map
3D Topographical map of the Knysna in South Africa. This model has exaggerated topography to make the counters stand out a little more. The code includes a color change to allow the water to stand out from the land.
- Pobrania
- 52
- Polubienia
- 10
- Ocena
- 0
P
PrintablesDonpilkerton
Vannystyle Truerc Matchstick
Dual antenna mount for the Vannystyle frame. Meant to be used with the Truerc Matchstick 65mm version. .f3d is included so feel free to remix!
- Pobrania
- 50
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAlex G
Volantex Phoenix 2400 Sunnysky motor mount
This is a custom motor mount designed specifically for Sunnysky x3120, although i guess it will also fit any other sunnysky motor. This is intended to be used with stock metal plate & screws so you dont need to drill anything. Note that…
- Pobrania
- 50
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTincdron
TinySA ULTRA Gridfinity
TinySA name box, pre-configured Gridfinity drawers, carrying handle. M3x40 carry handle screws. Filament: PLA
- Pobrania
- 49
- Polubienia
- 4
- Ocena
- 2
P
PrintablesMortymore
TinySA Ultra and NanoVNA-F unfoldable stand
Printed in PLA (0.2mm), pint-in-place and no supports needed, it was designed to fit inside the instruments case and to be a simple stand. The difference between the 2 options is that the stand specialy intended for the TinySA Ultra+ has…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKyler Henson
Vannystyle DJI o3 antenna mount
All the o3 antenna mounts ive found for this frame are off center and hit the props, so ive designed these 3 Vannystyle/Vannystyle pro Dji o3 antenna mounts. print with 100% infill No supports 1 angled o3 antenna mount with spot for a…
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
PrintablestorusJKL
IKEA NYSJÖN - LILLÅNGEN laundry cabinet legs/feet
A leg similar to LILLÅNGEN for a NYSJÖN laundry cabinet. The foot is much shorter than from Ikea as I don't need it to be elevated that high. I printed it with the base plate down and 5 perimeters to get maximum strength on the axis that…
- Pobrania
- 43
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRoland Deschain
Holder for the TinyS3 development board from Unexpected Maker
I was hacking a Halloween decoration and needed a way to mount a TinyS3 as double sided tape wasn't cutting it. Insert the board under the clips on the USB side and then snap down on the antenna side to secure the board. This may also…
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTwig
Grannysquare stretcher
This is a grannysquare stretcher to adjust the elastic form of grannysquares to make it easier to assemble the squares into e.g. a blanket. Put the pins through the knitted/crocheted square and leave it for a few hours to let it set.
- Pobrania
- 41
- Polubienia
- 12
- Ocena
- 0
P
PrintablesHugo Chacón ledesma
Organic door handle for Ikea NYSJÖN.
This is a door handle for Ikea NYSJÖN as the one that Ikea provides is tiny and not really useful. This is an improved version, that enhances the usability of the furniture, and it adds an original touch to it.
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLost
Bunnysus (Bunny Unicorn with Wings)
My daughter wanted a unicorn bunny with wings. So I mixed these two models together and voila!
- Pobrania
- 35
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDeadAgain_FPV
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKleber Gouveia
TinySA Ultra+ Box Insert
Design inspired in the LiteVNA64 box insert, but completely redesigned to optimize printing time. It has 2 versions of the bottom insert: without and with divisions.
- Pobrania
- 34
- Polubienia
- 4
- Ocena
- 5
P
Printablesweak
TinyS3 USB-Stick (ESP32-S3)
A small case to convert a TinyS3 to a USB-Stick. Handy for all kinds of home automation, eg. as Nuki Hub . BOM: Part sources are just examples… QTY Part Source 1 TinyS3 TinyS3 1 USB-C gender changer (male to male) Amazon 4 M3 x 3mm heat…
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAviv haas
Sunnyside up / UFO Frisbee
I love Frisbee, but I struggle with performing stunts and tricks. That's why I created these Frisbee designed to make throwing and performing tricks easier for the user. Printed in TPU with supports Printed in ender 3 s1 pro Make sure…
- Pobrania
- 34
- Polubienia
- 28
- Ocena
- 0
P
Printablescommodorium
SkinnySkim Protein Skimmer
A small airpump powered protein skimmer that I designed for my pico-marine tank. The airline goes into the base and into a limewood airstone. There's a cup to capture the skimate which incorporates an overflow hose barb. The overflow hose…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJosé Pedro
Iron Dionysus Classical Statue 3D Printable
Transform your space with this breathtaking classical statue that brings ancient Roman artistry to your 3D printer! This meticulously detailed STL model captures the timeless elegance of the Iron Dionysus of Tivoli, featuring flowing…
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablestheFPVgeek
Vannystyle Armguard - Skid
Vannystyle armguard & skid combo inspired by Brain3D's version Category: Other
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesZeciortech
Senyszyn's korale (neck beads)
Senyszyn's korale (neck beads) On 1st photo there is clean, just printed model, after that I just put on it car transparent spray and it looks amazing
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMonsieur-Pierre
Ben Tennyson | Ben 10 3D Model
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring the legendary hero Ben Tennyson from Ben 10 to…
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJV
Screwable funnel for 5l jerrycan (trychtýř na kanystr 5l)
Easy print without supports from PLA. Make sure the lower path has enough infill otherwise the thread can break sooner or later. Designed for jerrycans from Bauhaus ( https://www.bauhaus.cz/kanystr-na-vodu-stohovatelny-22852126 ) but the…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 5
P
PrintablestheFPVgeek
Vannystyle Action 2 Mount with ND Filter Slot
Vannystyle Action 2 Mount with ND Filter Slot REMIXED from design by PhiveOne_FPV Category: Other
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
Printableszolstarym
Tinysine TSA6179B bluetooth module enclosure
I had to file the rca holes down a little to get it to fit, and it was still a tight fit, so you might want to make those holes a little bigger (about .2mm diameter bigger might work?). A little filing was needed for the button holes, but…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRod Holland
Anysize T-Joint Assembly Jig | Cabinet Clamp
I'm a big advocate of openscad. It's a parameterized coding language for 3d printing. Well you might not be able to code, I assure you Claude can code openscad like nobody's business. I had a bunch of tokens and an agent to test, so I…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJailenmo
ROM Dionysus Bust 3D Scan
A photogrammetry 3D Scan of the Dionysus bust from Greece gallery at Royal Ontario Museum. Cropped the pedestal off and replaced with a small circular base for added stability. Scanned with Polycam Photogrammetry tool for free.
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
Printablesywabiko
TinySine Bluetooth Receiver Enclosure
Updated version is posted here. TinySine Bluetooth Enclosure v2 This is an enclosure for TinySine Bluetooth Receiver Board @Amazon. TinySine Bluetooth レシーバー TinySine Bluetooth Receiver Board @Amazon 用のケースです。 Print Settings Printer: QIDI…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJeff
motor mount for sunnysky brushless motor
motor mount for sunnysky brushless motor
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRichie
Klíč povolovací na kanystry - 5 l / Canister opening wrench – 5 L
Otvírák určený pro 5l kanystry, navržený pro snadné a bezpečné povolení i velmi pevně utažených uzávěrů. Usnadňuje manipulaci a šetří sílu při otevírání. Opener designed for 5 L canisters, intended for easy and safe loosening of even very…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRod Holland
Anysize L-Corner Assembly Jig | Cabinet Clamp
Openscad corner jig for assembling cabinets, and other wooden box structures. Everything is parameterized and commented so you can set it for the size you want, half inch 3/4 inch, even 18 mm : ). I included the 3/4 and half inch *.stl 's…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
Printablesbillygoat
ANYSECU / QYT 9900 Mount
I lost the metal mount that came with my Anysecu/QYT 9900 ham radio. There are two designs to choose from, one for the heat sink fins to be facing out, the other is the reverse with the fins facing the base. Both are spaced so there is…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBidiversity
atinyshellscript voron 2.4 AWD double sheer support
****NOT TESTED YET***** ANY FEEDBACK IS MUCH APPRECIATED AND TRY AT YOUR OWN RISK Added double sheer to atinyshellscript's AWD requires longer M3 screws, M3x35 instead of M3x30 Requires: 3x m3 nut 3x m3 x 8mm screws 1x F695 flange bearing…
- Pobrania
- 17
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPrawny
Easter Bunnys Day Out
It will soon be the Easter holidays and the bunny’s will be out celebrating. This easter the bunny’s are spending it down at the beach catching some well earn’t rest. They have the choice of jumping onto the boats and racing across the…
- Pobrania
- 17
- Polubienia
- 10
- Ocena
- 0
P
PrintablestheFPVgeek
Vannystyle - GoPro Hero 11 Mini Mount
Vannystyle - GoPro Hero 11 Mini Mount Thanks to Pokey FPV for providing the GoPro Hero 11 Mini top Check him out at: https://www.youtube.com/c/PokeyFPV TWO versions available: 1 - Side Load and vented 2 - Clam Style (CINEMATIC USE ONLY )…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablestheFPVgeek
Vannystyle Front Bumper
Vannystyle front bumper inspired by Brain3D's version Category: Other
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMiller-97
IKEA NYSJÖN - mirror cabinet adapter
Isn't it frustrating when your IKEA NYSJÖN cabinet doesn’t open all the way? Not anymore with this adapter! Gain more than 2 cm of extra space, making your toiletries more accessible and your life easier. Simply replace this adapter with…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSurfalex2000
3d Scanned Wood Bunnys (Hand Carved)
3d Scanned Wood Bunnys (Hand Carved). Maybe you like them. I also uploaded each of every one of them separately
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTheVoronModder
Wansview 1080p Camera mount for aTinyShellScript 2.4
Rhastlyn's Wansview 1080p camera mount works well if you want top mount, if you want a bottom mount for your 2.4 with aTinyShellScript's AWD conversion / mod then you need this mount. Print, mount camera to the printed part then install…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDan Cun
Hidden IKEA Mirror Mount - NYSJÖN Mirror
These are custom mounting brackets designed specifically for the £12 ($15) IKEA Nysjön mirror. Printed so that the mirror slides in from the top, no supports needed when printing. The original mirror comes with a small integrated shelf…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printablestyler
tinySA Ultra Small Travel Box
lid printed in TPU. bottom is in PLA. desinged to match my nano VNA case: https://www.printables.com/model/1131776-nano-vna-small-travel-box
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
Printablesoyvindl
Spacer for IKEA Nysjön feet
A simple spacer for the feet included with IKEA's Nysjön cabinet. I somehow lost one of the included spacers, so I had to make my own.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMaJa
2020 anysize inner corner
Wanted to make a box corner, for one corner you need 3 L_plates and one inner_corner. You need to replce connection_plates.scad from the original 2020 T-Slot any-size plates and rod holders with the connection_plates_2.scad. Print…
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBooks
Per Molts Anys Decoració de Pastissos
Decoració de pastissos "Per Molts Anys" Per més decoraciós, consulteu la meva col·lecció Agency Cake Decoration .
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDaniCzech
Páka na kohout kanystru
Manželka měla problémy s otevřením kovového kohoutu kanystru na pitnou vodu. Pravda že tento kohout nebyl pohodlně otvíratelný ani pro mě a potřeboval jsme rychlé řešení, aby rodina na chatě neumřela žízní, když odjedu do práce. Takže…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAsBurli
SunnySky Angel Quick Release Adapter for DJI Props
Mit diesen Adapter können die klappbaren DJI Propeller für die MAVIC Pro einfach mit den Sunnysky Angel Motor verwendet werden. Attention: The adapter has not yet been tested extensively in flight Category: R/C Vehicles
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablestheFPVgeek
Vannystyle Front Bumper
Vannystyle front bumper inspired by the Brain3d version Category: Other
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHainsilma
Focal Hadenys headband
Overview This is a more comfortable strap for my Hadenys headphones. It both helps avoid hotspots on my head and also protects the fabric from getting dirty too quickly. The variants I made 4 variations of the theme - the shorter variants…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRexlabanane
Vacuum cleaner adapter piece Electrolux Serenys Tornado
Replacement part for Electrolux Serenys Tornado vacuum cleaner. This part is located between the machine and the hose. Print in PLA at 30° to maintain flexibility in the locking clips and strength between layers. Should work in PTEG also,…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMichaël Fortin
IKEA NYSJÖN Mirror Cabinet Smaller Door Stopper
The provided IKEA parts that go behind the mirror doors prevent them from being opened as wide as they could. This model fixes this.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesflip2bits
Sunnysky X V3 Spinner Cover (x2212, x2216, x2220)
This is a spinner cover that goes over the metal spinner provided with sunnysky 2212, 2216, and 2220 X v3 motors. The metal cover is tiny compared to the diameter of the motor let alone a typically cowling front. This cover fits over the…
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
PrintablesArasti
Thierra Verde - klíč na povolování kanystrů 5l
Povolovací klíč na kanystr 5l od Thierra Verde. Doporučené nastavení tisku: PETG 0,2 mm výška vrstvy 3x perimetr 20% výplň
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCNES
TinySat by TAS
=== English version below the French description === Description (French version) Vous pensiez être imbattable sur les tailles de satellites ? Pico, nano et autre micro n'ont pas de secret pour vous ? Et bien nous sommes heureux de vous…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesABG3D
aTinyShellScript AWD Y Endstop Mount
Voron Trident/2.4 aTinyShellScript AWD/2WD Y Endstopmount Model origination: I have aTinyShellScript 2WD plates on my Voron 2.4 350 and did not find a suitable Y endstop mount. I used another from a firend but I lost about 4mm in Y travel…
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSmokintbird
TinySA cover
This is a fairly simple case or cover to protect my Tiny SA while it is being carried in the tool bag.
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0