Wyniki wyszukiwania: oller

Sortowanie

10 451 modeli

P
PrintablesSemmel

Joycon Controller with Trigger buttons. Easy print

Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing

Pobrania
34 033
Polubienia
11 572
Ocena
4,9
P
PrintablesIn3DSpace

Xbox Controller Stand

Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…

Pobrania
13 107
Polubienia
1736
Ocena
4,96
P
PrintablesB3D_Printing

Gaming Controller Stand

I had a friend ask me to design a small controller stand, and this was my result! The design works great with all the controllers I have personally, including; Xbox One Playstation 4 Playstation 5 Very easy to print on its side, although…

Pobrania
3841
Polubienia
367
Ocena
4,86
P
Printablesphi.gl

Self-leveling cup holder for TFK stroller

Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…

Pobrania
3423
Polubienia
1096
Ocena
4,62
P
PrintablesRepoholy

Dual Xbox controller holder / stand

This model is inspired by this simple holder: https://www.thingiverse.com/thing:716092 But because most of Xbox players have at least two controllers at home, the original model has been modified to a double holder for two controllers.…

Pobrania
3044
Polubienia
239
Ocena
5
P
PrintablesRepkord

RackRoller: Open Source Flange Roller Add-on For RepBox 2.3.1+ and RepRack System

Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…

Pobrania
2264
Polubienia
558
Ocena
4,95
P
Printablesfifindr

Sensory Fidget Roller - Spiky

A spiky sensory fidget roller designed for stronger tactile feedback and massage. With a height of 110 mm and a diameter of approximately 32 mm, it fits comfortably in the hand and rolls smoothly during use. The surface is formed by small…

Pobrania
2171
Polubienia
168
Ocena
5
P
PrintablesSEARS

XBox controller and headset wall bracket

Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games

Pobrania
2067
Polubienia
227
Ocena
4,91
P
PrintablesThomas

Headrest for Thule Urban Stroller

The THULE URBAN is a jogger pram and the child lies more in the pram than sits. If you also use the carrycot for leisurely excursions and want the child to enjoy the view, you may occasionally want the child to be able to sit nicely…

Pobrania
1844
Polubienia
88
Ocena
4,82
P
PrintablesKabliga

PS5 Controller Stand with PS logo

Very simple yet good looking PS5 controller stand. This stand is a perfect fit due to using a 3d scan of the controller. Minimal size with no supports or brims needed for easy print.

Pobrania
1809
Polubienia
175
Ocena
5
P
PrintablesMarianne657

Abstract flower - XL texture roller

Imprints clay with a beautiful abstract flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm…

Pobrania
1761
Polubienia
392
Ocena
5
P
PrintablesJaatinen

Mini Controller Toy / Fidget Gadget

I needed a toy for my son for when I'm playing on my PS5 so he can “join”, without endangering my real controllers, so I designed this easily printable little controller toy. Just look at this happy customer: Attention and disclaimer: If…

Pobrania
1717
Polubienia
311
Ocena
4,33
P
PrintablesPlaground3d

Minimalist Nintendo Switch Controller Stand

Print at .2-.28 layer height. 10-15% infill. Used Polymaker Black PLA. Check out my other stuff on Patreon at https://www.patreon.com/PlaGROUND or linktr.ee/PLAGROUND

Pobrania
1597
Polubienia
263
Ocena
4,5
P
PrintablesJulia Auer

Nintendo Switch Pro Controller Stand - Zelda TotK Remix

Update 12-06-2025: Added V2 of the controller holder. Removed tiny overhangs from the front pattern, that pushed through the bottom surface. Bottom surface should lay completely flat now! ---------- We bought our Nintendo Switch in the…

Pobrania
1590
Polubienia
289
Ocena
5
P
Printableszimo

608 PiP Half Cage Roller Bearing

Introduction: This 608 roller bearing features a half cage print-in-place design optimized for 3D printing. The rollers have a dynamically changing cross-section, allowing both radial and axial load capabilities. Its unique half-cage…

Pobrania
1567
Polubienia
387
Ocena
4,78
P
Printables4D

Minimalistic Nintendo Switch Pro Controller Stand - non-slip design

Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.

Pobrania
1462
Polubienia
116
Ocena
5

Minimalistic PS4 controller stand

I used a 3D scan of the PS4 dual shock controller and used it to create part of a negative mold to better fit the controller on the stand. here is a stand for single controller and one for 2 controllers. When printing rotate the model so…

Pobrania
1459
Polubienia
118
Ocena
5
P
PrintablesSoyuz

Rollerbearing (print in place)

Completely functional bearing which operates best in a vertical orientation without to much sheer force. Outer diameter: 17.69mm Inner diameter: 5.16mm The inner diameter is keyed to prevent the inner ring from spinning around the axle.…

Pobrania
1352
Polubienia
230
Ocena
4,5
P
PrintablesDJdoes_stuff324

Beach Sand Texture Roller

A roller beach toy for making textures and paths in the sand for that finishing touch on your sandcastle or just for fun. This model includes 6 different interchangeable rollers including Pebble texture roller Train track path roller Road…

Pobrania
1351
Polubienia
537
Ocena
4,55
P
PrintablesScott

Low Profil Perfect Fit Controller SKADIS mount

Hi! I didn't find any perfect fit low profil controller mount for my SKADIS pegboard so I did one myself. I designed it around a controller 3D scans so that it can be perfectly ajusted while remaining as discreet as possible. Controller…

Pobrania
1238
Polubienia
353
Ocena
5
P
Printablesneoyarus

Gulikit KingKong 2 Pro Controller Phone Holder

This is made for the Gulikit KingKong 2 Pro controller. I have not tested it with their other models, but it might work with them too. Main Features Pass-throughs for the back buttons (turn off, switch modes, pair) A hole for the charging…

Pobrania
1200
Polubienia
145
Ocena
4,67
P
PrintablesOndrej Kucera

Xbox One controllers stand

Stand for two Xbox One controllers with logo.

Pobrania
1197
Polubienia
188
Ocena
5
P
PrintablesMarianne657

Floral - XL texture roller

Imprints clay with a dainty floral texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…

Pobrania
1195
Polubienia
271
Ocena
5
P
PrintablesErlbeck

Thule Stroller Hook

A convenient hook for the horizontal metal bar on Thule Chariot and Urban Glide strollers (might also fit other models). Useful for helmets, jackets, bags, toys etc. The hook snaps securely onto the bar. I printed using black PETG from…

Pobrania
1187
Polubienia
101
Ocena
4,95
P
PrintablesMarianne657

Monstera and hibiscus - XL texture roller

Imprints clay with a beautiful Monstera leaf and Hibiscus flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed.…

Pobrania
1162
Polubienia
283
Ocena
5

Texture Roller – Fossil Velociraptor Skeleton

A stamp wheel from the Fossil Skeleton #9 These digital 3D printable models are meant to create textures in clay, polymer clay, or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…

Pobrania
1141
Polubienia
696
Ocena
5
P
PrintablesAleš Stárek
Pobrania
1139
Polubienia
151
Ocena
5
P
PrintablesChris Donnelly

Pattern rollers for clay

I wanted to make these rollers for a while, and finally looked into how to do it properly. By properly, I am referring to using User Parameters in Fusion 360 and constraints in the drawings. I printed them solid, and at half scale. I have…

Pobrania
1114
Polubienia
275
Ocena
5
P
PrintablesTrajan

Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)

This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…

Pobrania
1083
Polubienia
132
Ocena
4,86
P
PrintablesNelly

Sushi Maker/Roller

A simple, easy to print sushi former for full-size nori sheets. I've tested it in PLA and PET. PET is my preference. The rod's handle or face can be used to press into the sushi rice on each side to make space for centered fillings. The…

Pobrania
1072
Polubienia
163
Ocena
4,25
P
Printableskubasi3

Massage roller

Very easy to print from PLA. You can use 0 bottom and top layers.

Pobrania
1070
Polubienia
228
Ocena
4,82
P
PrintablesMarianne657

Hearts - XL texture roller

Imprints clay with a lovely heart texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…

Pobrania
903
Polubienia
204
Ocena
5
P
PrintablesMarianne657

Leafs - XL texture roller

Imprints clay with a beautiful leaf texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…

Pobrania
899
Polubienia
226
Ocena
5
P
PrintablesNils Kal

SNES Controller Headphone Stand - Retro Gaming Decor

Want to have a cool place to put your headphone? Print yourself this nice retro item! All parts are seperated so you won't need a MMU, just print them in your desired colors. Assembly is pretty straight forward, just put all pieces…

Pobrania
892
Polubienia
412
Ocena
5
P
PrintablesThomas Fischer

Vekoma Classic Roller Coaster Car

Thanx to Tim ( https://www.myminifactory.com/object/3d-print-classic-roller-coaster-train-142420 ) and Don1975 ( https://www.thingiverse.com/thing:39229 ) for their good work. I changed nearly every part a little bit, so I post this here…

Pobrania
827
Polubienia
148
Ocena
4,67
P
Printablesorax

IKEA SKADIS PlayStation DualShock 4 Controller Holder

DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…

Pobrania
806
Polubienia
138
Ocena
4,92
P
Printablesorax

IKEA SKADIS 8BitDo Pro 2 Controller Holder

8BitDo Pro 2 Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to @lowsc0re for the creation of…

Pobrania
779
Polubienia
122
Ocena
5
P
PrintablesErlbeck

Thule Stroller Cup Holder Adapter

Thule Chariot and Urban Glide cup holder adapter for the Bugaboo cup holder (https://www.bugaboo.com/us-en/accessories/holders-and-trays/bugaboo-cup-holder-MI001906.html). The adapter is designed to fit the Bugaboo cup holder, but can…

Pobrania
743
Polubienia
82
Ocena
5
P
PrintablesMarianne657

Ripples - XL texture roller

Imprints clay with a beautiful ripple texture of concentric circles. 20cm wide - 2 sizes of pattern Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in…

Pobrania
720
Polubienia
172
Ocena
5
P
PrintablesMrCliveMrClive

Herringbone Geared Turntable Roller Bearing

This is hybrid between a tapered roller bearing, a herringbone gear set and a spiral bevel gear. it is ideal for use as a turntable roller bearing, taking mainly axial loads. It is self retaining/aligning with the parts kept in place…

Pobrania
636
Polubienia
201
Ocena
5
P
PrintablesMajsterkowo

Filament Spool Stand with Rollers on Bearings V2.0

Parts needed: 4x bearing 608 Maximum spool width: 110 mm Maximum spool diameter: no limit More info and photos: http://bit.ly/2poCEIN Best regards! Lukasz Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 30

Pobrania
616
Polubienia
55
Ocena
4,56

Sensory play rollers with stamps

The rollers are a comparable size to my stamp cubes (4×4×4 cm). There are 6 rollers with the following themes and have a stamp o each end: flowers trees space road railway paw prints plain roller with smileys (to prepare a surface for the…

Pobrania
584
Polubienia
121
Ocena
5
P
PrintablesZANXL

Fpv Drone piloting sticks for ps5 controller

Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y

Pobrania
571
Polubienia
42
Ocena
3
P
Printablesarcanelayers

Nintendo Switch Pro Controller Stick Locks

Description Prevent your Switch Pro Controller from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps…

Pobrania
545
Polubienia
43
Ocena
5
P
PrintablesKacabQa

Cup & Phone Holder for Cybex Stroller

🍼 Cup & Phone Holder for Cybex Stroller – 3D Printable File (STL/3MF) Designed to match the modern aesthetic of Cybex strollers 📱 Phone Slot Specs: Fits phones up to 80mm wide and 12mm thick 🥤 Cup Holder Specs: Diameter: 70mm – ideal for…

Pobrania
515
Polubienia
41
Ocena
5
P
PrintablesPeter Main

IKEA Dry Box Rollers - 3 Spool

Keep your filament Dry while printing. We all know how important it is to keep our filament dry but it's a pain taking it in and out of the ziplock bag. What's more, while you're printing, your filament is exposed to the air. Nylon and…

Pobrania
513
Polubienia
94
Ocena
5

PS5 Controller and Headphones Stand

Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…

Pobrania
501
Polubienia
81
Ocena
0
P
PrintablesTrajan

Honeycomb Wall PS5 Controller Mount

I remixed this good looking mount, added logos, Honeycomb wall mounts and a cable holder underneath. I don't like the cable holder all that much (it works but just not great) and may take it out of V2. I hope you enjoy it. Recommend…

Pobrania
476
Polubienia
107
Ocena
5
P

Cardboard fold roller

What is it for ? I designed this fold roller (I know it looks like a pizza cutter ^^) to make clean folds on cardboards. Hardware needed : I used a section of brass cylinder (external diameter : 5mm, internal diameter : ~4mm) to act as a…

Pobrania
466
Polubienia
213
Ocena
5
P
Printablesfifindr

Disposable Glue Mixing Pad with Roller

Use tree supports on build plate only. A compact disposable glue mixing pad with a small roller applicator. The tray can be used for mixing and holding glue, epoxy, resin, or other adhesives, while the roller helps spread the material…

Pobrania
418
Polubienia
187
Ocena
5
P
PrintablesBurak808

Balička cigaret / Cigarette roller

Hello there! I recently moved to another country, I'm used to roll cigarettes with this thing, but I couldn't find it here. So by the photos and memory, i created this version, similar to original, fully printable :) I prepared gcode…

Pobrania
412
Polubienia
43
Ocena
5
P
Printablesorax

IKEA SKADIS Stadia Controller Holder

Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…

Pobrania
393
Polubienia
63
Ocena
4,78
P
Printableszimo

Print in Place Roller Bearing

50x20x10 Roller Bearing with roller cage The roller geometry allows it to be loaded axially to a certain level. Tolerances between the rings and the roller is available in 0.15 mm and 0.1 mm. Printing: Print orientation: print it on the…

Pobrania
373
Polubienia
49
Ocena
5
P
PrintablesJoshua 3D

Ikea Skadis / Pegboard Steam Controller Holder

Original - https://www.printables.com/model/251647-steam-controller-wall-hanger-with-dongle-slot Remix designed to fit into Ikea Skadis pegboards. My other Ikea Skadis models can be found here -…

Pobrania
355
Polubienia
42
Ocena
4,67
P
PrintablesFireDragon3D

Video Game Controller Christmas tree ornament

You will definitely be on Santa's "nice" list with this Christmas tree ornament. A unique gift for the gamer in your life, whether it's for your significant other, a child, or an entire household of gamers, this ornament is sure to be a…

Pobrania
328
Polubienia
78
Ocena
5
P
Printablescjnaz

Toothpaste and Sour Cream bag rollers - V4 !!

Design stolen from Deviator2x. Simple, functional, and small. Thanks! The V4 design is a parameterized Fusion 360 model that supports various tube widths. .stl and .gcode files are posted for 60mm wide toothpaste tubes and 120mm wide sour…

Pobrania
325
Polubienia
36
Ocena
4
Pobrania
323
Polubienia
102
Ocena
5
P
PrintablesJS

Thule Stroller Cup Holder Adapter

I (accidentally) printed this cup holder https://www.printables.com/cs/model/130989-cybex-cup-holder with this adaptor https://www.printables.com/cs/model/204281-thule-stroller-cup-holder-adapter and it does not fit each other at all.…

Pobrania
306
Polubienia
27
Ocena
5
P
PrintablesChrischris

IKEA BÄSTIS Lint roller case

A simple case for your IKEA busts lint roller. To travel, or to have at home. The idea came after travelling for work, having to take a lint roller with me, since my dog's white hair would always be stuck on my nice clothes. Travelling…

Pobrania
303
Polubienia
34
Ocena
3,67
P
PrintablesAinon3Dtisk

PS5 controller holder original design

Good morning, Welcome to my profile, full of models and miniatures :-) I have for you a PS5 holder, Playstation 5 controller original design. It is a suitable solution when it does not take up much space and you have somewhere to put the…

Pobrania
300
Polubienia
42
Ocena
5
P
PrintablesPaul

Dry Box Filament Spool Rollers with Hygrometer - Prusa Mini Compatible!

Click the links for Bill of Materials The original model wouldn't fit on my Prusa Mini, so I chopped off an end and modified it to fit a little less expensive hygrometer . You can still add desiccant to the tray for a proper dry box , but…

Pobrania
299
Polubienia
65
Ocena
4,5
P
PrintablesAlex Benson

Overture Filament Roller Ring

Have been getting good results with Overture filament, but they just changed to cardboard spools. All fine and good, except over time the cardboard on the roller sheds fibers down onto your prints. These reusable clip-in rings solve that…

Pobrania
295
Polubienia
68
Ocena
5

Fun Roller print-in-place

After a long time I decided to come up with some fun model . I like print-in-place models , this one is just that. The model has four rotating parts, you can connect the patterns in a line If there is interest, I can make a roller with a…

Pobrania
273
Polubienia
59
Ocena
5
P
PrintablesMichael

Akai Professional Fire Stand (a stand for the FL Studio hardware midi controller by Akai)

Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…

Pobrania
270
Polubienia
33
Ocena
5
P
PrintablesKabliga

Miyoo Mini + grip controller plus stand

Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! After taking a 3d scan of my mini+ I set it into a controller design I made. This gives it a perfect, yet tight, fit so…

Pobrania
241
Polubienia
19
Ocena
5
P
PrintablesSlic/d D/sign

XBox One Controller Mod - Top-Down Play

Update 2024-09-26: STL file added + revision of left base plate. Description: This snap-on mod allows the Xbox One controller to be placed down and played from top-down. This mod was inspired by and is a remix of Akaki's Snap-On Xbox…

Pobrania
239
Polubienia
120
Ocena
4
P
PrintablesART TOO

Tollerance Test / Dimensional Test: Inner Tollerance, Outer Tollerance, First Layer Tollerance, Top Layer Tollerance, ...

Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!

Pobrania
223
Polubienia
34
Ocena
5
P
PrintablesJon Lê

The DoomScroller, a smartphone tripod for the COVID-19 pandemic

Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…

Pobrania
222
Polubienia
45
Ocena
4,75
P
PrintablesMatthias

Klammer für Kärcher Reinigungsrollen - Clamp for Kärcher cleaning rollers

Mit diesen Klammern können die Kärcher Reinigungsrollen des Hartbodenreinigers schneller gedrocknet werden With these clamps, the Kärcher cleaning rollers of the hard floor cleaner can be dried faster

Pobrania
192
Polubienia
32
Ocena
5
P
PrintablesAlien3D

RackRoller: Alien3D Remix of Open Source Flange Roller Add-on For RepBox 2.3.1+ and RepRack System

I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…

Pobrania
191
Polubienia
51
Ocena
5
P
PrintablesFrancesco Pini

Quest 3 controller support

wall mount for quest 3 controller

Pobrania
174
Polubienia
19
Ocena
0
P
PrintablesSaini

SNES controller holder

SNES controllers are inherently stackable, so this holder takes that feature to the logical conclusion and makes it possible to store the controllers neatly as a single stack.

Pobrania
167
Polubienia
37
Ocena
5
P
PrintablesMehTechArt

Controller holder for Qube 540 Case

Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…

Pobrania
159
Polubienia
52
Ocena
0
P
PrintablesFedi

Lucky 13 - Roller skates

Some roller skates for Lucky 13 to make his life even more sportive…

Pobrania
159
Polubienia
78
Ocena
0
P
PrintablesTony Currie

PowerA Nintendo Switch Controller Stand Remix

Double PowerA Nintendo Switch controller stand

Pobrania
149
Polubienia
16
Ocena
5
P
PrintablesJL_Design

Cross Roller Bearing

The Design Here is an alternative to 3d printed ball or gear bearings which are usually hard to print or have high tolerances (which is bad for bearings). This bearing is designed to have low tolerances and to be easily 3D printable. I…

Pobrania
148
Polubienia
25
Ocena
4,75
P
PrintablesDirkHoefle

Case for LILYGO TTGO VGA32 V1.4 Controller

Case for LILYGO® TTGO VGA32 V1.4 Controller you will need the LILYGO® TTGO VGA32 V1.4 Controller…

Pobrania
147
Polubienia
3
Ocena
0

Rumble Plate Dice Roller

Create an inclusive gaming experience with the Rumble Plate Dice Roller. This switch activated dice roller utilizes a hobby motor, battery holder, Omron switch, and 3.5mm jack along with a couple of 3d printed parts and a clear plastic…

Pobrania
125
Polubienia
33
Ocena
5
P
Printablesecsv

Wemos D1 Mini Heater fan controller

There is a large list of radiator fan mounting models Alvomane's Radiator Booster UppsalaHenrik's 2x92mm fan ducts for radiator djtifosi' Radiator Blower Fan with magnetic holder simlrh's Radiator Fan schranzistor's Radiator amplifier…

Pobrania
117
Polubienia
40
Ocena
4
P
PrintablesJulia Auer

Switch Pro Controller Stand - Animal Crossing remix

After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…

Pobrania
112
Polubienia
30
Ocena
5
P
PrintablesKUMOYUKI

Remote Controller Box

It can store up to four remote controllers at most. There is a protrusion for preventing falling, but it does not stand out and does not compromise the design.

Pobrania
105
Polubienia
13
Ocena
0
P
PrintablesSlawoFu

Ultimate Traxxas TQi controller GoPro mount

If you need to mount a GoPro (or any other camera) on your Traxxas TQi controller get that model and print it out! The camera mount is at 30° angle to let you navigate your RC model freely. I've tested it with GoPro 11 and 11 mini - at…

Pobrania
103
Polubienia
21
Ocena
5
P
Printablesdavile92

PS5 Controllers Stand

Copiar a la microSD de tu impresora e imprimir.

Pobrania
95
Polubienia
7
Ocena
0

Independent double spool roller

You can use a socket to tighten the bolts in all the way.

Pobrania
95
Polubienia
23
Ocena
5
P
Printablessquinn

Articulated Arms Stroller Fan

A lovely fan which offers a cooling breeze that can be fully 3D printed (other than the motor, battery, and switch). Makes use of a snap-ball-joint system to create three articulating arms which can be conveniently flexed in a myriad of…

Pobrania
95
Polubienia
34
Ocena
0
P
PrintablesSquareBallz

Zakk Wylde Clone Hero Controller Remix

Remixed the body into a Zakk Wylde style body. Each part of the body needs to be printed with accent+main on the same buildplate. I used this tutorial to do the trick: https://reprap.org/wiki/Multicolour_printing_with_one_hotend Good luck!

Pobrania
92
Polubienia
30
Ocena
5

Steam Controller Dongle Casing with Stick Clip

Don't loose your Steam Controller dongle! Uses clip from HpInvent's design, but with this one you don't have to worry about losing the clip itself. Inserting dongle into the case You need to insert the dongle USB first at an angle. It's a…

Pobrania
88
Polubienia
20
Ocena
5
P
PrintablesDokkie

DC PWM motor controller case lid

Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…

Pobrania
87
Polubienia
12
Ocena
5
P
PrintablesPrint@Hive

Test tolleranza

🛠 CalibraTest 5X è il tool definitivo per testare tolleranze meccaniche e precisione dimensionale della tua stampante 3D. Progettato con fori e alloggiamenti calibrati da 0.05 a 0.30 mm, ti permette di identificare facilmente errori di…

Pobrania
83
Polubienia
2
Ocena
4
P
PrintablesWerkStattWunsch

NamePlate Toyota Supra for Motorcycle Roller Chain Key Ring

A little Toyota Supra name plate for the amazing Motorcycle Roller Chain Key Ring from Bootjevaarder: https://www.printables.com/de/model/180357-motorcycle-roller-chain-key-ring A Toyota Supra is not a motorcycle, but I wanted to gift the…

Pobrania
80
Polubienia
13
Ocena
5
P
PrintablesStefan R

Enclosure for 3018 CNC Controller

My CNC came without an enclosure for the controller. This is my attempt to fix that. Printed in PETG with 0.4mm nozzle, mostly the “structural” profile. For the top (Oben) of the box there should be some painted supports inside the holes…

Pobrania
79
Polubienia
10
Ocena
0
P
PrintablesErez Ardel

Waterproof 10 - 60A PWM Solar Charge Controller wall mount

Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…

Pobrania
76
Polubienia
5
Ocena
0
P
PrintablesGiantBrain

Move It! – 3D-Printed Transport Rollers with 608 Bearings

Less carrying. More rolling. Move It! adds wheels to items that are awkward to carry. Place the rollers beneath the edges of your item and, when needed, secure them with a 25 mm tension strap. The ribbed, L-shaped body supports the corner…

Pobrania
76
Polubienia
57
Ocena
5
P
PrintablesIwan

Nivea Roller Deodorant Upside Down Stand

wanted to create something interesting to print. at first trying to avoid any middle part, but the roller could push the stand away. The following iteration included a connecting bridge with the feet. You do need some support to print,…

Pobrania
74
Polubienia
11
Ocena
5
P
PrintablesKD

Roller shutter stopper / Rolladenstopper

Nachdem meine Rollladenstopper nach 20 Jahren spröde wurden und ich die Original-Ersatzteile nicht mehr bekommen konnte, druckte ich Neue nach den Originalmaßen. Der Stopper hat ein M5-Innengewinde und eine Unterlegscheibe für die…

Pobrania
71
Polubienia
3
Ocena
0
P
PrintablesGL3D

Best and safest Model Rocket Launch Controller

Update 1: 20/03/25- I noted that Ankermake studio has some foibles when saving/ creating .3mf files using void volumes- for some reason this means that the files created in AM studio are not readable by Prusa slicer (gives an error when…

Pobrania
68
Polubienia
19
Ocena
0
P
Printablesprexint

Norstar M140-M Mig Welder Roller Arm

The roller arm plastic housing that holds the roller bearing is not a replacement part you can purchase as far as I'm aware. This would require you to purchase a secondhand welder just for this small part or purchase a whole new welder.…

Pobrania
61
Polubienia
1
Ocena
0
P
Printablesjako

Lint Roller - slightly overengineered

With two cats at home, i have to remove a lot of fluffy cat fur from clothing and furniture. All the cheap lint roller you can buy, brake under such an extensive use. They wobble, wabble and break after a while so i designed my own…

Pobrania
61
Polubienia
12
Ocena
5
P
PrintablesBM

fpv sticks for Nintendo Switch controller

With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…

Pobrania
55
Polubienia
7
Ocena
0