Liczymy pasujące modele…
Update June 19th 2021. I've updated the logo on the design to reflect the new logo for the project. This is a cartridge slot dust cover for the OMVS Neo Geo console. It's 190mm wide, so it's a pretty large print. If you don't have the…
I wanted to contribute to the awesome OMVS project, so I made this AES inspired Top shell as a variant for others to use. Note: I dont have a way of testing if the model works (no printer, nor a MV1C) - so if there's anything wrong with…
I needed a new home NAS to replace my old QNAP servers, so I built one using a Raspberry Pi CM4 with a CM4 IO board and SATA PCIe card. NASsie supports 2 '* 2.5-inch drives and 2 '* 3.5-inch drives. The case is completely 3D printed. This…
This is a remix/rebuild of the excellent OMVS shell made by Avram. My printer wasn't big enough to print the shell in one part so I designed a new shell that is printable on a Prusa i3 MK3 sized printbed. All OMVS parts are completely…
This model is a fit for the Seeed Studio 13.3" Spectra 6 E‑Ink screen with a Seeed Studio XIAO ePaper DIY Kit EE02 controller and a 2500 mAh LiPo battery . It allows the screen to fit nicely in an IKEA Lomviken 30×40 cm frame without…
The Reolink OMVI 3i's panoramic camera has a large vertical field of view. Even tilting the panoramic lenses completely downward I still captured a lot of my house's soffit and the distant sky. This adds about an additional 10 degrees of…
Mouthpiece box for Stomvi and other trumpet mouthpieces. The box is closed using the magnets, unfortunately I no longer know where I got them from. Mundstück Kasten für Stomvi und andere Trompeten Mundstücke. Geschlossen wird die Box über…
You may find on ebay some really clever interface, named TOM, for your C64 which allows to connect modern mouse, keyboard or gamepads by USB. It is also suitable for Atari and Amiga. It comes with typical housing, however this housing…
Meine Teststrecke bietet keine Möglichkeit, die Verkabelung zu verstecken, deshalb bin ich passenderweise auf einen Verteiler gekommen, wie er manchmal an Straßen zu finden ist. Es passen zwei Klemmblöcke mit jeweils 5 Polen hinein,…
Simple Holder for LOMVUM infrared thermometer. Could be mounted by double side tape or two M3 screws. Print Settings Printer: Haribo Rafts: No Supports: No Infill: 20% Category: Tool Holders & Boxes
Da ich öfter mal verschiedene Kleinspannungen benötige habe ich diese tragbare Stromversorgung entworfen und gebaut. Die Idee basiert auf: Tragbares Netzteil für Bosch Akku 18V Bauteile: 1x DC DC Boost Buck Converter 83x48mm 1x Schalter…
This reinforces both of the E letters so that you may print it upside down without dealing with any settings, at least on a Bambu Lab printer.
You can print all parts of the OMVS shell split version on a smaller printer like an Ender 3 Pro (when sliced with Prusa Slicer) with the exception of the base which requires a printer with a larger build plate. I split the v8 base in two…
Dieser Stahlgittermast entspricht dem Modell des 1896/97 errichteten Mastes der Bernburger Elektrizitätswerke. Er eignet sich ab Epoche Ic für Freileitungen zur Stromversorgung oder für Straßenbahn-Oberleitungen. Text der…
passend für: Category: Other
For my light track system with 2 separate connections, I needed a power distributor for the ceiling with 2 outputs for the cables . Boxes with 1 outlet are available at hardware stores - but not with 2 outlets. Since my kids are out of…
Model dient zum gezielteren lüften des Qidi Plus 4 im Bereich des Motherboards. Er ist 35mm tief und die Bohrungen sind bei 4.5mm Durchmesser genau im passenden Abstand zum Sunon 24V 80mm Lüfter. Ich habe dadurch 10° weniger am Treiber…
Hinweis: Aus Sicherheits- und Haftungsgründen dürfen Arbeiten an 230/120-V-Netzspannungsanlagen (Niederspannung) grundsätzlich nur von qualifizierten Fachleuten ausgeführt werden. Note: For safety and liability reasons, work on 230/120 V…
Abdeckung um versehentliches beschädigen der Membran zu verhindern und das Stromversorgungsmodul V-REG2 montieren zu können. Der Bügel kann ohne Support gedruckt werden. Bei mir zumindest gab es keine Qualitätseinbußen. Zusammenbau:…
This model is a fit for the Seeed Studio 13.3" Spectra 6 E‑Ink screen with a Seeed Studio XIAO ePaper DIY Kit EE02 controller and a 2500 mAh LiPo battery . It allows the screen to fit nicely in an IKEA Lomviken 30×40 cm frame without…
Hinweis: Aus Sicherheits- und Haftungsgründen dürfen Arbeiten an 230/120-V-Netzspannungsanlagen (Niederspannung) grundsätzlich nur von qualifizierten Fachleuten ausgeführt werden. Note: For safety and liability reasons, work on 230/120 V…
For my light track system with 2 separate connections, I needed a power distributor for the ceiling with 2 outputs for the cables . Boxes with 1 outlet are available at hardware stores - but not with 2 outlets. Since my kids are out of…
This 3D printable mount is designed to hold the DOOGEE U11 11" Android 15 Tablet (2025) inside an IKEA LOMVIKEN 21x30 cm frame , creating a clean and functional wall-mounted Home Assistant dashboard . The mount consists of four push-fit…
The IKEA LOMVIKEN frame series looks great but can be tricky to hang. This custom wallmount matches the frame style and makes installation easier. For small frames, mount with hot glue. For larger ones, use screws. The slot gives ±5 mm of…
This is my customized version of the OMVS Shell, the original design relied heavily on support materials and needed a lot of post processing. While you can make it into a good looking part I really wanted this to be easier to print. Now…
A very low cost ESP32-based hardware status dashboard for OpenMediaVault (OMV) NAS devices. This project uses a host Python script to send system metrics to a SPI TFT display mounted in the NAS chassis. The CAD Designs featured are made…
Visit customversum.com to create own custom box, perfectly suited to your requirements.
Download model to print 3D from: https://cults3d.com/en/3d-model/game/true-sound-tractor
Customizable Wall Lamp from customversum.com thought the web online 3D CAD Customizer via REST API thanks to CAD Automation in Solid Edge printed 3D on Bambu Lab X1-Carbon. To get wall lamp that meets your expectations You can input…
Since I couldn't find suitable supports for this frame model I created one. Use M3x30 nails. If you need to modify i have attached Autodesk Fusion 360 file. Category: Household
Just what it says! Simple link cable clip for GOMVR Quest 3 head strap
