P
Printablesnyknyc
OOONO CO-DRIVER NO1 Sun Visor Clip
clip for attachment of the Ooono Co-Driver to your car's sun visor
- Pobrania
- 2649
- Polubienia
- 91
- Ocena
- 4,78
Wyniki wyszukiwania: oono
Liczymy pasujące modele…
P
PrintablesdirtNnasty
Ooono Co-Driver No2 Clip
Same idea but just recreated for Co-Driver No 2
- Pobrania
- 1272
- Polubienia
- 53
- Ocena
- 5
P
Printablesjusthavefun96
ooono No. 2 clamp
ooono No. 2 Clamp Inner size 15,5mm - 20mm This clamp is ideal for attaching the ooono No. 2 to the Sun visor in car. IMPORTANT : When you print the model with PLA, dont leave it in the car (severe deformation)!!! Here I provide you with…
- Pobrania
- 1019
- Polubienia
- 40
- Ocena
- 4,33
P
Printablesbeinaendi
OOONO Co-Driver No 2 Holder Car Vent Clip
Because I couldn't find a car vent holder for my OOONO Co-Driver No 2, I created one myself. It has a slide in vent clip in 2 sizes (20 + 25mm length) and two variants for the holder itself. You can either choose to use the magnets…
- Pobrania
- 841
- Polubienia
- 41
- Ocena
- 5
P
PrintablesPhazeShift
OOONO CO-DRIVER NO1 Sunvisor Clip
A sunvisor clip for the OOONO CO-DRIVER NO1. Inspired by @nyknyc 's design . It secures the CO-DRIVER NO1 with a friction locking case. Printing Instructions: I printed both parts out of PLA (Maybe use something more heat resistant…
- Pobrania
- 669
- Polubienia
- 30
- Ocena
- 5
P
PrintablesPhazeShift
OOONO CO-DRIVER NO2 Sunvisor Clip
A sun visor clip for the OOONO CO-DRIVER NO2, based on my design for the CO-DRIVER NO1. This clip secures the CO-DRIVER NO2 with a friction-locking case. Additionally, it is designed to enable charging of the CO-DRIVER while it remains in…
- Pobrania
- 668
- Polubienia
- 20
- Ocena
- 4,33
P
PrintablesPeter Kühnapfel
Ooono No.2 Halterungen und Abdeckung (Remix)
Ich habe den Halter für den neuen OOONO No2 angepasst, weil es diesen so noch nicht gab. Der neue OOONO No2 hat nur 2 kleine Magnete auf der Rückseite, diese empfinde ich als zu klein, um diesen sicher zu befestigen. Den Clip, eigentlich…
- Pobrania
- 614
- Polubienia
- 21
- Ocena
- 0
P
PrintablesStefan
OOONO CO-Driver NO1 - sunvisor mount
I didn't want to stick the OOONO in the car with double-sided tape. That's why I drew a clip for the sunvisor with and without car brands. The advantage of this postion is when the OOONO is directly at head height you don't miss the alarm…
- Pobrania
- 471
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDeno
OOONO 2 sunvisor clamp
Simple clamp to mount your OOONO 2 to the sunvisor in the car
- Pobrania
- 373
- Polubienia
- 11
- Ocena
- 5
P
Printablesgrooveup
OOONO-Driver Halter
OOONO-Driver Halter für Mercedes B-Klasse
- Pobrania
- 336
- Polubienia
- 22
- Ocena
- 5
P
PrintablesBernd
ooono Cover
Der kleine, runde Blitzer-Warner ist in dezentem Schwarz gehalten und lässt sich somit unauffällig irgendwo an der Armatur befestigen. Noch besser ist, wenn er sich versteckt und als Air Fresh tarnt. Zum drucken auf den Bauch legen. Die…
- Pobrania
- 303
- Polubienia
- 24
- Ocena
- 4,5
P
PrintablesKrzysztof d
Uchwyt na ooono 2 ooono holder
Drukowane z PLA Esun w temperaturze 220 stopni i pierwsza warstwa 230. Wsporniki automatyczne w krajalnicy AnycubicSlicerNext
- Pobrania
- 270
- Polubienia
- 22
- Ocena
- 5
P
PrintablesCADBOB
OOONO V1
Ich habe es mit PETG gedruckt! PLA wird der sommerlichen Hitze im Auto vermutlich nicht standhalten, ein Brim ist hilfreich. 2 Wandschleifen 2 untere Schalensichten 2 obere Schalenschichten
- Pobrania
- 260
- Polubienia
- 10
- Ocena
- 5
P
Printablesnyknyc
OOONO CO-DRIVER NO1 Case
No support needed. Infill 20% recommended. If the inner part sits too loose just put some normal tape around it to increase friction or scale it up a bit.
- Pobrania
- 200
- Polubienia
- 14
- Ocena
- 0
P
PrintablesIkarusIBK
Ooono Co-Driver No 1 Case
It's possible to use the Ooono over a headset while riding. Therefore I just throw it in the tankbag or jacket. To protect it and prevent me from pushing the button I made the case. Fits including the 3M-Tape. Easy print, 0,15mm layers…
- Pobrania
- 188
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSebastian V.
Ooono No. 2 Adapter
Ich hatte seit 2020 den alten Ooono No.1 mit Halterung, bin diese Herbst 2023 auf den neue Ooono No. 2 umgestiegen. Aber leider passt es nicht auf die alte Halterung. So bin ich auf diese Lösung gekommen!
- Pobrania
- 151
- Polubienia
- 7
- Ocena
- 0
P
PrintablesYosuke
OOONO No.1 holder for BMW F21/F22
A simple holder for OOONO No.1 on the room mirror bracket cover of BMW F21/F22. It can be printed the side face down, and I recommend to use some 1mm thickness form tape in between the holder and the OOONO No.1 to stabilize it. This way,…
- Pobrania
- 151
- Polubienia
- 9
- Ocena
- 5
P
PrintablesTritschi
Holder for OooNo Co-Driver No2
I tried out this co-driver, but from three traffic events he only could recognize one. This was not satisfactorily for me, so I returned this device. There, where the co-driver was held magnetically I made a reverse piece with counter…
- Pobrania
- 131
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFranz
Ooono No.2 Halterungen und Abdeckung (Remix-Remix)
Auf Anfrage von @onas02_2475218 hier der Remix-Upload Hi, hab mir letztendlich auch nach dem Erhalt eines wunderschönen Fotos von mir für einen OOONO entschieden. Da mir noch kein für mich passendes Konzept über den Weg gelaufen ist, hab…
- Pobrania
- 122
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJennifer
Ooono Co-Driver Nr2 Cover
Cover for ooono co driver no2 to prevent accidental contact.
- Pobrania
- 85
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTim Esper
Ooono Cover mit Zigarettensymbol
Das Modell habe ich angepasst damit das Cover so aussieht als wäre es der Zigarettenanzünder.
- Pobrania
- 69
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTolja
Ooono No2 - Sun Visor Clip
Ooono No2 - Sun Visor Clip - Inner size 5mm - 20mm
- Pobrania
- 66
- Polubienia
- 2
- Ocena
- 5
P
PrintablesDazza
REVISED "OOONO CO-DRIVER NO2 Sunvisor Clip"
I remixed @PhazeShift's original Model to better fit my sun visor and to have the OOONO closer to the edge. Be sure to download the cap/case from https://www.printables.com/model/747150-ooono-co-driver-no2-sunvisor-clip in order to be…
- Pobrania
- 60
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTritschi
St. Christopher in OooNo No2 Co-Driver Holder
There, where the co-driver was held magnetically I made a reverse piece with counter magnets and installed a Saint Christopher instead. Hope he will protect my driving in case of an accident, and hopefully more in advance. Please…
- Pobrania
- 51
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYosuke
OOONO No.1 dechrome / personalize ring
This is a simple ring enable to replace the original inner ring of OOONO No.1. I generally not a big fan of having chrome accents in the interior of cars. So I made a very simple inner ring for the popular OOONO alarm. You may either…
- Pobrania
- 40
- Polubienia
- 5
- Ocena
- 5
P
PrintablesMoritz_Oe
Ooono battery mod CR2450 to AA
After using the Ooono for a couple of years, I've gone through a couple of CR2450 cells, which are not available everywhere and cost too much for how long they hold up. I can get semi-used AA batteries at work and switched everything else…
- Pobrania
- 39
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJamierey
OOONO P-DISC NO1 Magnetische Halterung
Die P-DISC NO1 Magnetische Halterung mit großer Klebefläche ist eine Lösung für ein häufiges Problem bei der Verwendung der OOONO P-DISC NO1 elektronischen Parkscheibe. Dieses 3D-Modell wurde speziell entwickelt, um die Schwachstelle der…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJoe Poppa
Abdeckkappe / Cover Ooono Co-Driver No2
Leicht und schnell aufsetz- und abnehmbare Abdeckkappe für den Ooono Co- Driver No2. Guter und fester Sitz der Kappe, aber trotzdem leicht abnehmbar, so das das Ooono beim Abnehmen sicher in der Halterung bleibt. Filament PETG (im Auto…
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBernd
OOONO Holder
Ein einfacher Halter für OOONO 1 Ich habe ihn mit doppelseitigem Klebeband auf eine freie Stelle auf dem Armaturenbrett geklebt. Der OOONO ist sehr schnell zu entfernen. ;) Viel Spass damit. A simple holder for OOONO 1 I stuck it to a…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
Printableslamborghini-74
OOONO Co driver case
i made a case for the ooono no2 co driver for your keys
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
PrintablesColdBeer
Endstops without sensors for ToAuto / Koonovo Pyramid or Creativity CY300
Here you'll find a X-endstop and Y-endstop for use the printer with non sensors. I finally configured Marlin to work without endstop sensors, so cables and sensors doesn't make sense for me now. So I modified both pieces from originals to…
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 5
P
PrintablesThomaswt
OOONO 2 PLUS slidein base
I needed an easily movable base for my OOONO 2 PLUS as I move between company cars. I liked beinaendi 's version with the slide-in clips on the backside, but unfortunately it doesn't fit the PLUS model. After a little tinkering in Prusa…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMikeydoo
OONO Power Distribution Terminal Block Case
A simple case for this power distribution PCB I bought off of amazon for my lack enclosure: https://www.amazon.com/dp/B09D3BV22M?ref=ppx_yo2ov_dt_b_fed_asin_title It is designed to use M3 x 4mm x OD 4.6mm heat set inserts to secure the…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablesodysseus31096
OOONO CO‑Driver NO2 Sunvisor Clip with Cover
A sunvisor clip for the Ooono Co‑Driver No2. Since devices like this are not allowed in some countries, I wanted to make the gadget a bit more discreet. By adding a clear PETG window between the cap and the Co‑Driver, it’s no longer…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesbawang
Oono Sirene Cover
The Sirene from Ooono needs a cover with a smal handle, you cant buy them anymore on their website so I decide to create my own.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printables
Oono Sirene Cover
The Sirene from Ooono needs a cover with a smal handle, you cant buy them anymore on their website so I decide to create my own.
P
Printables
OOONO NO.1 FULL SQUARE CASE
A full case for the OOONO No1 PCB to be more disguised. Printed with 2 colors, black and transparent with 0.2mm layer height. Print with prime tower for better transparency. Fits snug in the case and the button can be pressed like on the…
P
Printables
OOONO No. 2 Hiding Cap Citroen Logo
Das Logo auf der Abdeckkappe wurde ausgetauscht, ansonsten wurde nichts verändert.
P
Printables
OOONO NO.1 FULL SQUARE CASE
A full case for the OOONO No1 PCB to be more disguised. Printed with 2 colors, black and transparent with 0.2mm layer height. Print with prime tower for better transparency. Fits snug in the case and the button can be pressed like on the…
P
Printables
Renault 5 E-tech Small Compartment Ooono holder
I thought the small compartment next to the handbrake was kind of no use to me, so I made a insert for it to fit my Ooono CO-DRIVER NO1 (old version). The position of it makes it nice and easy to press if you need to. Fits right in the…
P
Printables
Zoonosis Mouse
“No, I don’t think COVID is here to stay, but having COVID in the environment here and in the world is probably here to stay.” “COVID as we’re dealing with it now is not here to stay, the normal doesn’t have to be. We have so many more…
P
Printables
OOONO Holder Audi A3
Print on its side with support to the bottom of the two small clips. Use ABS, PETG etc. as it gets quite warm in cars in the summer.