Liczymy pasujące modele…
Quite a "spontaneous" project but I wanted a castle, so now everyone gets a castle! Warning: Only a super bare minimum is uploaded here, the most of it is available on cults3d (also for free, but they handle larger files much better):…
Simple yet effective tool for removal of built in supports of OpenLOCK system tiles. Only 1 gram print but makes support removal tireless! It works even with PLA but stronger filament is recommended. To use it insert the hooked part…
This is a variation of openlock tiles but changed to fit in magnets instead magnet side used D3mm x 6mm
This is a variation of OpenLock tiles but changed to fit in magnets instead. Magnet side used D3mm x 6mm
Playing around with some different floor treatments for the openlock floor sections. A lot of the tile I see out there are for dungeons, and caves, and the like. Which makes sense. But what if you want to do a fancier prison? or a manor…
NoWalls Cavern Dungeon Tiles (OpenLock/MagBall) ================================================ Part of my #NoWalls Modular 28mm Dungeon Tiles Collection UPDATE:* I have added support for 5mm ball magnets! Just like my #NoWalls Standard…
NoWalls Standard Dungeon Tiles (OpenLock/MagBall) ================================================== Part of my #NoWalls Modular 28mm Dungeon Tiles Collection UPDATE 2:* Once again I have updated the files. These are now at Version 4. The…
NoWalls Standard Angled Dungeon Tiles (OpenLock/MagBalls) ========================================================== Part of my #NoWalls Modular 28mm Dungeon Tiles Collection These are the angled tiles that work with the #NoWalls Standard…
NoWalls Magnetic Doors and Doorways (OpenLock/MagBall) ======================================================= Part of my #NoWalls Modular 28mm Dungeon Tiles Collection UPDATE:* I have added two additional tile doorways. One is full…
NoWalls Wood Dungeon Tiles (OpenLock/MagBall) ============================================== Part of my #NoWalls Modular 28mm Dungeon Tiles Collection NOTE: I painted the thin tiles in white to make them more visible for demonstration…
Based on the excellent #NoWalls dungeon tiles by TheRooster, and the OpenForce Half Height Spiral Stair with only minor adjustments to reduce complexity Category: Toy & Game Accessories
Technically just a lazy remix of the latest OpenLOCK clip from the linked OG design. My DM and I set out on a 3D printing journey to make a nice little modular map for a campaign that we are in and I was persistent about not needing walls…
Isn't it sad when your heroes are blocked by a stubborn door that won't open? This door opens the way into adventure. I need these doors to build my Hero Quest board. Let's all have glorious adventures with our dungeons. And please show…
dranac73 did an awesome job to design the floor pieces for heroquest. As I decided to use OpenLock for RPGs terrain I adopted this beautiful work to OpenLock. I startd with the 4 most iconic rooms. They printed well, they should print…
These files are meant to support an openlock collection by boosting floor tiles and walls to allow verticality. These are meant to be unseen and are compatible with standard triplex openlock tiles following the I, E, S, and SB templates.…
I tried a bunch of clips to see which ones worked the best with my 0.6mm nozzle, and made this clip with the best one I found. They are a little tight at first but get bent into a good shape for tight locking while still being able to be…
Here is a remix of my springy magnetic clip as a double/pass-through clip (for columns or floor spacers etc). Category: Toy & Game Accessories
Quick adaptation of the Springy clip design by eleotlecram to a double-clip (i.e. for passing through "I" Columns) Category: Toy & Game Accessories
This is a remixed https://www.thingiverse.com/thing:3612827 with one of its sources, https://www.thingiverse.com/thing:3809057 to retain all of SingularityGames other improvements while reverting to the original side mounted single barrel…
Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…
Quite a "spontaneous" project but I wanted a castle, so now everyone gets a castle! Warning: Only a super bare minimum is uploaded here, the most of it is available on cults3d (also for free, but they handle larger files much better):…
Important note: As you know, uploading huge files on platforms that are not Cults3D are sometimes problematic. Therefore I was only able to upload the small wall here, all small towers, keep, ... are only available on cults:…
Simple yet effective tool for removal of built in supports of OpenLOCK system tiles. Only 1 gram print but makes support removal tireless! It works even with PLA but stronger filament is recommended. To use it insert the hooked part…
Attention: The full set is only available on cults (for free), the upload here contains all basic parts you need, but not all variants, and not the full plate variant: https://cults3d.com/en/3d-model/game/modular-hills-openlock Quite one…
World Map builder has been remixed to connect using the open lock format. I have added a few tiles to it and am planning on adding more as I go. I printed mine at 75% and saw success with most items. The only 2 items that didn't print…
These are openLOCK connectable free form dungeon tiles. These have texture and have a variety of inter-connectable designs. The openLOCK clips can be downloaded for free from this link. https://www.thingiverse.com/thing:2343306 I have…
I created and released a few sets of #NoWalls Dungeon Tiles that use the OpenLock form factor. During development I wanted to try out the 5mm magnetic balls for easy connections without the OpenLock clips. I came up with a small…
Video of the two-color flicker https://youtu.be/6CtCdkzSDtM Want some awesome flickering wall torches, but don't want to crowd your tabletop with walls? I have the solution! At a minimum, print the torch cap in a translucent/transparent…
Its a complete remix and optimized for 0,2Layer Top is 3Layer so at base0,3mm you gone end up at 6,3mm Its simply better to print and faster The 2x2 Base got only 2 / 3 Locks
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. I love to share these files with all of you 3D printing tabletop enthousiasts. However, if you don't feel like printing the tiles yourself, or looking for…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
Contains each shape I made in Visio on its own page. You can print as many or as few pages as you want on standard US Letter sized paper. (Make sure to print at 100%, not shrink to fit.) Current as of Printable Scenery's OpenLOCK 5:…
These are special 7mm tall variants of the OpenSCAD OpenLock Collection . They have no texture, and can be used for mixing your own designs. Why choose these over the original OpenLock tiles? I would argue that these tiles have the…
This tile must be printed without support. I personally print it at .2 layer hight. After printing you can easely snap the door loose and file away some loose material on the bottom of the door and underside of the door frame. After that…
I wanted to use the 3x6mm barrel magnets bought originally and same used for Catan magnet sets. I extended the walls to support 3x6mm diametrical magnet and they work well and have room to spin to align along the curved surface. These…
I wanted to use the 3x6mm barrel magnets bought originally and same used for Catan magnet sets. I extended the walls to support 3x6mm diametrical magnet and they work well and have room to spin to align along the curved surface. These…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
The clip has enlarged holes to put 0.22m2 wires through them. The same enlarged holes are in the flare.
The organizer holds - 30 pcs of 4x4 floors - 20 pcs of 2x4 floors - 60 pcs of 2x2 floors - 300 pcs of connectors
This is both version of the .5 x 2 tile for OpenLOCK tile system. E has three openings for the openlock clip on one side. While W has two on one side and one on the other.
This is a magnetic connection system for OpenLock terrain. It is glue free, polarity independent and can make sturdy structures that are quick to put together and take apart. You can learn more about OpenLock at:…
A fix for the Springy OpenLOCK Clip design that allows for 2 walls in the centre instead of 1. Could be an issue with my slicer settings, but regardless this makes the design more sturdy but not any less useable.
My own organizer/storage solution for OpenLOCK terrain tiles. Each cell can hold eight base tiles or five walls. The bin for the clips should hold around sixty. Update: Over many sessions using these (and many additions to my collection…
This is a revision of an OpenLock Clip that adds an additional 3x4mm magnet, and flips the direction of the magnets for strength and grip for heavier terrain items (this was helpful when using 3x3 tiles). Printed in Inland PLA+ on a Prusa…
Anothere Brick Wall pice for your tabeltop Gamefield its all included Bases for Openlock2 triplex and magnetic TIP print openlog magnetic for better combination !! ACTION !! i use 5x3mm Round magnets so be aware not Standard 6x4 as OF2 I…
Bases For DaD Tabletop Game MODERN Brick Style all optimised for 0,2mm layerhight USE Bridging at CURA Printtime about 8min per BASE on my crap A8 SEE the other Items in My Account on Printables It may not look like real prints but its…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
This board is available to download thanks to the support of the Singularity Games Patrons: https://www.patreon.com/SingularityGames You can find my newest Magnetic Hex Board Design here: https://www.patreon.com/SingularityGames/shop Each…
Its A New Construct of a Very Simple Design Optimized for Fast print FDM 10Pices on a raft can print under 10Min at 120mm/sec 2 Designs FULL and Spring
FASTPRINT FDM 0,3Layer optimized THE Displacement Texture is Homemade and included Why i am using Orange Basematerial ?? Imagin at the GameNight everyone brings 20Tiles 6People =120 tiles And at the End you can Take your own as marked…
You need to get matching bases with one inch / 25.4 mm sides per square. Currently, there are only 2x2 tiles available, suitable for 2x2 floor pieces, 2x2 wall on tile pieces, and 2x2 corner pieces. Join my Patreon community for…
I've always been a fan of the look of polygonal masonry, but it's hard to find (freely available) dungeon tiles. The ones I do find aren't as compatible with other tile sets I use. So I figure if I'd need to remix something anyway, might…
There are more Brick wall tiles in my account just search my Models for “BRICK” Designed for Print in Place USE Bridge mode its 12mm MAX Distance i use 8mm Lines infill and for Details use 0,15layer it prints well in 0,3 Have fun
Add one for the Famous RPG Game ONE piece Version Layerhight 0,3 use Bridge if filament does not make it over 10mm space infill is 10% as usually i use 5mm zigzag on things like that to speed up Prints in under 15min have fun to color the…
A remix of devonjones Dwarven Halls Knotwork Floors. The originals weren't playing nice with my other floors (too tall) so I chopped them up, removed some unneeded height, and affixed them to the 7.x series Triplex bases. The knotwork…
Remixed the floor/wall tiles to TRP OpenLock style. u/NCTinman on reddit had a need and I had the time. Eventually I'll use these in my games too. All credit to devonjones for an awesome design to work from. Category: Buildings & Structures
This version of the door frame has thicker pillars. The original version, while fantastically designed, wasn't strong enough and cracked quickly. I scaled up the pillars to be much thicker and stronger while still attempting to maintain…
This is the half tile needed to be able to do magnetic bases for walls such as OpenForge 2.0 port of ruined stone: https://www.thingiverse.com/thing:2275577 These are a remix of https://www.thingiverse.com/thing:2275604 These are the 1,…
