Liczymy pasujące modele…
Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…
Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…
Multi-bit holder for the Ryobi P251 Brushless Hammer Drill/Driver Snap into the tool's single bit holder, then slide in over the screw hole Bits slide in from front or back Suggested print settings: - 0.20mm QUALITY - Prusament PETG…
NOW AVAILABLE NEW VERSION FOR OneBlade QP45xx/46xx NOVĚ K DISPOZICI VERZE PRO OneBlade QP45xx/46xx EN: PHILIPS OneBlade stand The model was designed with an emphasis on simple and fast printing while ensuring sufficient weight and…
printing with Layer high 0,08mm for best results.
MCP2515 serves as a practical communication protocol for many industrial and automotive applications. Not only that, but it also offers other features, including TJA1050 high-speed IC and MCP 2515 IC integration. You can even allow this…
Repair kit for Philips SHP2500 headphones. To print all parts need to add in slicer mirrored part ( full kit in g-code file) Material: PET-G -recomended Layer high: 0,2 or lower Supports needed under the cylidrical parts ( support added…
this is a 3d-printable model of a case for the mcp2515 CAN bus shield/module. there are stl & step files for download. The CAN Bus shield can be found here: https://www.az-delivery.de/products/mcp2515-can-bus-modul
This is an adapter that converts a DELL monitor stand into a VESA stand. Compatible with stands labeled “FFT-ZS”. Please let me know if you can use this model other than those listed below. UP2516D UP2716D U2717D Print setting Layer…
Over the last few years, the original attachments all broke in the same place, the small tab securing them to the clipper. I was not abel to source any replacement parts online, so modelled a set base on the original. They may fit others…
This one cuts at an angle, just not as steep as the original guards. It holds via friction-fit. I've tried snapping mech
Removed "P02" lettering. Edited Rail into an classic Picantinny Rail. Fuzzy skin for Grip on the handle. Check out the original model by Useless Ideas!!!
So this is a Case for the Arduino UNO and derivates thereof. You can snap on the Lid. At good printing quality it fits very good. You also get .step files if you want to make changes by yourself. Feel free to be creative. Additionally you…
Removed the original lettering with an realistic "Sig Sauer P250". Please print it like the original modell with the Muzzle facing down!! Check out the original model by Useless Ideas!!!
A minimalist stand for the Philips OneBlade (QP2510). Keep your shaver tidy and upright. Easy, support-free print
This is a bracket for mounting the Geekworm P252 Raspberry Pi 3B+ case to a wall or other surface. Has two M3.5 size (#6 standard) mounting holes spaced at 40 mm center to center distance. I printed it with 0.3 mm layer height at 100%…
P250 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
Print with any material, preferably tpu. 0.2 layer high no supports.
This printable is currently only a 3D project. Use New version .STL !! .stp & Ligh only older version 😊 I'll rework this project in a little more detail this summer with additions for different Oneblades (which will allow for a smaller…
Ehdrien's Mini Faux Red Dot Sight as rear sight for Sig P250 Blowback. Check out Ehdrien for Red Dot internal Parts. https://www.thingiverse.com/thing:4832756/files And check out the genius behind the Sig P250 Blowback model.
A speaker riser / stand that matches the one that comes with the Corsair SP2500. Approximately W-100mm x D-30mm x H-12mm (18mm at the rim). It doesn't exactly match, the original it's missing a slight angle on the way up, but it's close…
Picatinny Version of the Rear sight. Check out the original model by Useless Ideas!!!
Hi Everyone! *8/31/2026 UPDATE Vastly improved down facing mount with wall mount and pole mount option. Pole mount is also compatible with AP27 outdoor AP. I've created some additional mounts for HPE Networking Instant On access points to…
Diese passgenaue Wandhalterung ermöglicht es, die Konsole der Wetterstationen Ecowitt HP2560 oder Froggit HP2000 sicher und platzsparend an der Wand zu montieren. Da das Originalgerät primär für das Aufstellen konzipiert ist, schließt…
This was printed using the following “thangs” Material: TPU *REQUIRED* Print speed: 40% Adhesion: No Supports: Yes
This is an easy-to-print bracket so you can mount an Arris2502 set-top TV box to the bottom of your desk to regain some usable space on the top. I used 3M VHB (Very High Bonding) tape. It is pre-drilled for #4 Countersunk wood screws if…
MADE FOR Philips Oneblade First Shave QP 2515/16 may fit other models, but not 100% sure Material: PLA Printer: Ender 3 v3 SE Supports: Yes Mirror I used (You can use any mirror at size 15x8cm or 5.91x3.15in):…
The Grundig P25-449_12 I recently got didn't come with the original mobile antenna, so I designed this simple snap-in cover to close the spot where the antenna would have been mounted.
I made this mount to attach a Fenix HP25R headlamp to my Vertex helmet. The mounts prints good from the side, with supports Use double tape on the Headlamp_mount_lock and glue it to the helmet to make the mount permanent, Category: Sport…
A flange for the Yaskawa GP25 to have the same screw pattern as the Kuka KR6. The nuts are drop in and don't need support.
It is a part for extend Doepfer MBP25 keys, increasing lenght to match classic pipe organs. It adds 13 cm to keys and make it easier to play. It is a two parts model! The total length is 42cm, but it cut to match 25cm printers and require…
Platine arrière pour encastré une radio VHF WP250 de chez Orange Marine. Les vis moleté du support fournis avec la radio sont réutilisé. Conçu pour pincé des cloison de 0-14mm Suffit d'ajouter un mastic marin pour faire le joint en façade.
Removed "P02" lettering. Edited Rail into an classic Picantinny Rail. Fuzzy skin for Grip on the handle. Check out the original model by Useless Ideas!!!
Removed the original lettering with an realistic "Sig Sauer P250". Please print it like the original modell with the Muzzle facing down!! Check out the original model by Useless Ideas!!!
Picatinny Version of the Rear sight. Check out the original model by Useless Ideas!!!
Ehdrien's Mini Faux Red Dot Sight as rear sight for Sig P250 Blowback. Check out Ehdrien for Red Dot internal Parts. https://www.thingiverse.com/thing:4832756/files And check out the genius behind the Sig P250 Blowback model.
Кейс для платы от ноутбука HP250 G8. просто перенести плату, охдаждение, плату USB и 3,5 jack. Всё крепится на небольшие саморезики. Так как вся длина не помещается на площадь печати рпинтера, я разделил корпус на 2 части и добавил…
Skadis mount for Ecowitt HP2551. Fits into the holes in the back of the device. Attached mlrkey's skadis mount (https://www.thingiverse.com/thing:5257623) Print with supports
This is a end cap for Attema P25/K25 systems without the bulky end from Attema (E25 end cap/eindstuk). Also made a cable holder, since my broken off piece perfecly fit inside to hold cables in. Just like the Attema DH25 wireclip/draadclip…
P250 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
Кейс для платы от ноутбука HP250 G8. просто перенести плату, охдаждение, плату USB и 3,5 jack. Всё крепится на небольшие саморезики. Так как вся длина не помещается на площадь печати рпинтера, я разделил корпус на 2 части и добавил…
pieds de soutien pour Jackery SolarVault 3 BP2500 batterie additionnelle, et cache connecteur sous la BP2500. les pieds permettent de surélever la batterie pour pas qu'elle soit sur le sol car les pieds d'origine sont petits, jai aussi…
This adapter clamps around the rubberized portion of the handle on your Weller SP25N and provides a 43mm outer diameter to mount it into all Euro-standard drill stands. I designed this to go with the Olsson Heat Insert Tools, which are…
I've created this model to install CAN transreceiver to BTT SKR Pico v1.0 which can support CANBUS connection with firmware mods. Meant to use in Voron V0.1 build. BOM: 4x M2x10 self-tapping screws 3M double-sided tape - the same used in…
I created this battery connector in order to better support a diagonal connection layout with my EEL based battery pack. You would properly want to use a flame retardant filament - for me it was enough for now to protect the terminals.
