Liczymy pasujące modele…
PFM-1 (противопехотная фугасная мина) is a Russian scatter anti-personnel mine. There is also a PFM-1S version, but it differs only slightly. The model consists of two parts connected by a thread (body and head). The head piece is…
Opening a door as a firefighter, law enforcement officer or emergency doctor can be a challenge sometimes- but KEEPING it open can be just as important. If you are tired of jamming doormats and trashcans into doorways then this print is…
This mine is a continuation of the PMN mine series. It is similar in appearance to the PMN-2 mine. The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a…
I printed from PLA and PETG. To save filament you can reduce the density of the filler to 5%. You will need external material to make it up. You need a wire (one that won't break when bent) that you attach to the underside of the liner…
Currently very frequently used anti-personnel mine in Ukraine. It consists of five parts. I printed from PLA and PETG. The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical…
Material : PET-G Support : Yes Infill : 10 - 15 % I printed from PET-G, but it will not be a problem to print from PLA. The layer height was 0,2 mm. It was printed only with supports on the printing pad! If you put supports everywhere,…
A Yugoslav mine frequently used in the Yugoslav conflict of 1991-2001. The mine has both a trip and a pull safety. It belongs to the category of "bouncing" mines. When initiated, the mine is thrown approximately 1.2 m above the ground…
This mine is the predecessor of the soviet PFM-1 mine known as the butterfly mine. Originally from the United States. It was used primarily in the Vietnam War. It was discontinued in the 1970s. Its design and principle was subsequently…
In the darkness of the far distant future, the mutant, alien, and worse plunder the megalopolis cities. Some looking for forgotten technology and precious metals, and others for the sweet taste of Hum’ahn flesh. Despite the endless…
Material : PET-G (PLA) Infill : 10 - 15 % Support : Yes - read bellow This is a very simple mine. Rather than a mine, it is its casing. The principle of the mine is to screw the explosive mechanism into the body of a standard 200 g tritol…
Material : PET-G/PLA Infill : 10 - 15 % Supports : Yes (on printing pad) Layer height : 0,2 mm Nozzle : 0,4 mm (Prusa MK IV) You don't need anything to build it. No glue, no spring. It's very simplistic, but the principle remains. If you…
Print took around 33hrs with %15 infill, .16 layer height. Has moveable wheels and SAM surface-to-air-missile.
Material : PLA-Prusament Infill : 15 % Supports : Yes The model is not functional. It has no moving parts in it. Only the head and the body are threaded. The head cover is adapted so that it can be glued to the head. Imitation of a…
In the darkness of the far distant future, the mutant, alien, and worse plunder the megalopolis cities. Some looking for forgotten technology and precious metals, and others for the sweet taste of Hum’ahn flesh. Despite the endless…
It's an Italian bouncy mine. The pressure plate is movable up and down by means of a spring and is fitted into the mine body by means of a twist system. Spring dimensions: 37 mm x 14 mm (outer diameter) x 1.5 mm wire thickness.
Material : PLA - Prusament Supports: Yes Infill : 15 % You will need a compression spring with a diameter of 27 mm, a wire width of up to 2 mm and a length of at least 58 mm. Without the spring, the footplate will not return to its…
I printed from PET-G, but PLA is probably a better filament. All the parts fit together. Only after printing did I realize I could make the internal mechanism from one part and not two. I won't change it though if it works. Maybe it's the…
Material : PLA-Prusament Infill : 15 % Supports : Yes The model is made up of three parts, but only two are needed. The head and body are the main parts. The cover is optional. Mine has no moving parts (springs). Only the head and body…
Material: PLA Nozzle: 0,4 Layer height: 0.2 mm Printer: Prusa MKIV The model of this mine is made of moving parts that imitate the actual operation of the mine. The real MGP-31 mine is armed by sliding the bolt out of the mine body, which…
Printed from various materials (PLA, PETG) Mine is not functional. it is only static. To improve the appearance you can use a piece of wire to simulate a cotter pin. The threads fit nicely Watch out for the supports. Unfortunately someone…
Material: PET-G or PLA Infill: 15 % Support: Yes I've printed with PET-G, but it shouldn't be a problem to use any other material. Layer height 0,2 mm (nozzle 0,4 mm). Mine is only for demonstration. It is not functional, but I tried to…
Material : PLA or PET-G Infill : 10 - 15 % Supports : Yes Layer heigth : 0,15 - 0,2 mm Nozzle : 0,4 mm According to some sources, this is a Czech anti-personnel mine PP Mi Ba. Interestingly, this version never made it into the arsenal of…
An Israeli mine with the simple name "No 10". It's an anti-personnel mine. The mine has a pressure plate. It uses a twist system, so all you have to do is insert and turn. I printed from PETG, but only because I don't have black PLA…
I don't have enough filament at the moment, so I haven't printed it yet. It is a very simple model, made in one piece. There are very few sources on the internet that adequately describe this mine, so this model is for display only. It is…
"little sister" of the MAPT-78-F2 mine (which you can find on my profile). Printed from PLA. It is a very simple mine based on a hand grenade. The mine simulates the real look and function of a real mine. To make it work you will need a…
Nothing terribly difficult about assembly. Need to print two .30 Cal MGs.
Ripped straight from the Fallout 76 game files. 17k triangles 51k vertices
American M2A1 Anti Personnel mine for reenactment display Category: Props
Material : PET-G Infill : 15 % Support : Yes I printed from PET-G, layer height 0,2 mm. Nozzle 0,4 - Průša MK IV. This is a very simplified but FUNCTIONAL model! The arming and securing works the same as the original model. It only…
Material : PLA, PETG, … Infill : Yes Support : You dont need them Layer height : 0,15 - 0,2 mm nozzle : 0,4 mm This is the original PP Mi Ba mine as used in the Czech army. Its use is forbidden today. The mine as such is only the upper…
Ripped straight from the fallout 76 game files. 20k triangles 60k vertices
EDIT: finally printed. Mine folded up nicely, however don't print the cover part.... it just doesn't fit and it's hard to take out. It won't bother anyone if you don't put it in. Functional model of Italian mine AUPS. The real model of…
Bio Pod Personnel Vehicle The stars won't wait, nor will the cargo inbound to your customers. Intermodel Cargo Pods are found on every planet in the populated universe and multiverse (universal quantum wave function, anyone?). It's how…
This is an “Unauthorized Personnel Only” sign that I made using my Future n0t Found typeface . It is briefly referenced in my cyberpunk short story, “Keep Portland Wired,” which is being republished in The Big Book of Cyberpunk , coming…
ISS Vanguard Insert (Base Game + Personnel Files) This is a modification of the insert created by manuelf ( https://www.printables.com/model/950159-invincible-iss-vanguard-insert ). I really liked the insert (especially the section…
Un support pour brosse à dent Oral B
Porte-clé du personnel Squid Game, personnages incontournable de la série… Keychain of the staff of the Squid Game series, essential characters of the series…
Dimensions 158 x 114 x 4 mm Printed at 0.2mm layer height on my BambuLab P1P using PolyTerra Cotton White Matte PLA PolyTerra Lava Red Matte PLA Bambu Textured PEO build plate Featuring official OSHA headers for electrical safety…
Un dés spécialement conçu pour les personnes en manque de chance, faite quelques lancer et vous aller reprendre confiance en vous ! A réaliser en deux couleurs avec l'AMS ou le MMU
Se modèle est un dé pronom personnel pour apprendre les pronom personnel en jouent avec un dé.J'ai fait aussi des dé avec des verbe du 1er groupe, du 2eme groupe et du 3eme groupe et avec être est avoir.Bon jeux!!
Impression en PLA, 387g utilisé. Dimensions : Hauteur : 213 mm Largeur X : 176 mm Largeur Y : 185 mm Le fichier au format fusion 360 est fourni. J'ai commenté le maximum, pour permettre une modification aisée du fichier :). Bon apéro à…
An authorised personnel only sign. THIS IS NOT AN AMS PRINT. Printing the STL file without changing the filament will make the entire print one colour. You will need to change the filament by yourself, but you can use the Gcode file to…
Création d'un personnage citrouille
Deuxième version Porte-clé du personnel Squid Game, personnages incontournable de la série… Second version Keychain of the staff of the Squid Game series, essential characters of the series…
The BTR-78 "Beetle" provides mobility and security to its two crew and dozen dismounts. Eight all-terrain tires keep the beetle crawling, while a mounted heavy machine gun scares off any would-be predators.
This scale model of a real military Armoured personnel carrier is a 3d printable display piece for dioramas, showcases, and collector displays. Great for tabletop scenes, display shelves, or model collections, offering a detailed armoured…
Armored personnel carrier STL 3d model for display and diorama scenes, a scale model of a real military armoured vehicle for 3d printing, display ready. This model is ideal for display shelves, tabletop wargaming dioramas, museum-style…
Źródło oznaczyło ten model jako treść 18+.
Print background in white, letters and symbol in red. Use slicer to add pause in gcode to change filament
The Fab Four of the Severed Floor.
Some time ago I ordered a people guidance system from Vevor for Halloween: Product link Here the belts are embedded in the posts. However, I had two places where I had no room for the post. I developed this housing so that I could remove…
Ce support permet d'installer une tablette de communication sur les barrière de lit d'une personne couchée. Elle peut ainsi continuer à utiliser sa tablette pour communiquer, piloter son téléphone, écouter de la musique ou regarder des…
Ce modèle permet un meilleur maintien du moignon et éviter les glissements de celui-ci durant l'accélération.
This is a 3d printable model of the german armoured personnel carrier Marder in the version Marder 1 A3. Highlights - the tracks are printed in TPU and can move - the rear door can be opened - The model provides a large variety of details…
