Liczymy pasujące modele…
My Rotating Icing Stand to go with it! → https://www.printables.com/model/280087-revolving-cake-stand-for-icing-serving-30cm-12-inc I have a XL set for big cakes and chunky stuff. →…
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
My Rotating Icing Stand to go with it! → https://www.printables.com/model/280087-revolving-cake-stand-for-icing-serving-30cm-12-inc I also have a regular size set here! → https://www.printables.com/model/290093-piping-bag-tips How to use:…
This is a printable model of a device which folds a 1cm Keder / Piping out of a 4cm fabric strip. It folds the edges to the inside and than folds it to a U-shape, so you can sew it to your fabric edges to prevent from frazzling.…
I bought this cake decorating set for my girlfriend for Valentine's Day. While it does come with a case for the tips, it is set up in such a way that two tips go into each divided section. When you turn the case upside down, or even tilt…
These are the BEST! No running to the store, except for more frosting! I can feel the Sugar Buzz already… The possibilities are endless, create any piping design you desire and print it in about 5 minutes to add the perfect flare to…
Churros piping nozzle tip to put on any given Bag. How to use: Put the nozzle in the bag. Fiddle the Bag through the nut securing the nozzle at a corner. Cut the bag to reveal the nozzle. Use a somewhat sturdy bag. Mine ripped because of…
These turn any plastic baggy into a piping bag in 2 seconds. ~ Full Piping Tip sets ~~ Regular size: https://www.printables.com/model/290093-piping-bag-tips XL Size: https://www.printables.com/model/292317-piping-bag-tips-xl-size
This consists of the external piping that runs up side 2 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. These pipes include the water and Environmental Control Ducts (ECS) pipes. Notice that when adding…
This consists of the external piping that runs up side 3 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. These pipes include the LOX and LH2 pipes. The LH2 pipes are the three with the yellow bands. The…
This consists of the external piping that runs up side 4 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. These pipes include the hydraulic pipes and cables. Notice that when adding these parts, some…
For use in the VW T5 / T6 California - foldable cup holder (kitchen piping rail). Assemble with M3 screws. Print Settings Printer: Multec Multirap M420 2Move Rafts: No Resolution: 0.2mm Infill: 15% Filament: Multec PLA-HT blue Category:…
This consists of the external piping that runs up side 1 of the Umbilical Tower. These are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to level. Higher levels…
Piping bag containers meant to hold rolled up piping bags of various sizes, the top makes them easy to pull out individually. Perfect for a bakery, or busy kitchen.
my piping bag developed a tiny hole at base of nozzle, so made this longer (62mm) so it would cover said hole, works a treat. Split into 2 so the “star” prongs would print that little bit stronger CR6-SE 0.2mm 42% infill support yes
my wife is a pastry chef and asked for something like this. I made this simple shape to resemble old fashion milk shake glasses because she has an affection for the classic American style and retro dinner aesthetic. created to make it…
east prints with 4-5 walls and 10-20% infil ABS or ASA recommended
Gridfinity baking piping tips storage with room for the adapters to the bag. Has height of 6U and should be stackable. Fits Wilton small tips and a bunch of cheap chinesium knockoffs.
These are simple piping tip storage boxes. They do not stack, and are not designed for lids. The intention of the included models is to hold the tips slightly (2 mm) above the floor of the box, so that tips can dry if there's any water…
Piping Rail Hook for VW California / Multivan 12.3.2018 - added double hook Print Settings Printer: Multirap 420 2Move Rafts: No Supports: No Resolution: 0.2mm Infill: 25 Notes: support for double hook Category: Automotive
An organizer for piping tips that have a base diameter of roughly 18mm. There are 35 total slots.
Tip for decoration food with creme. I have printed it with 0.6mm nozzle, with the variable layer height: 0.3mm in the base, 0.15 for the actual tips. The last layer created small blobs rather than tips, so I trimmed those. The color…
This is a work in progress, but I have been feeding my chickens with it for about a month and it is working great for me. You'll need to buy a length of 4" PVC drain / irrigation pipe, for which a photo is offered.
After searching the world in vain for the perfect organizer for my cake and cookie decorating tips, I have been left with no other option but to create one of my own. Through the excruciating process of careful measurement, trial and…
This consists of the LH2 pipes on Side 1 of the MLP. This are part of the larger Shuttle Mobile Launcher Platform model.
Clip / Holder for amateur, Ham, CB radio Microphone. For use in the VW T5 / T6 California - Kitchen piping rail. Remix of https://www.thingiverse.com/thing:2942514 and https://www.thingiverse.com/thing:2511088 Category: Gadgets
This consists of the Liquid Oxygen pipes on Side 1 of the MLP. This are part of the larger Shuttle Mobile Launcher Platform model.
Use these super cute piping bag organizers to keep your piping bags tidy and readily accessible, with two fingers you can quickly pull any size piping bag out of the container and the next is ready to go. There are three sizes of…
PVC piping corners for IGOW/RaceGOW scale it to 115% for it to work with 3/4 inch pvc
It is maybe easier to use a 60mm diameter aluminum duct, but it is not neardy enough. This ecosystem allows anyone to print their exhaust ducts by themselves. There pipe connectors can directly connect to a 60mm fan, using the same screw…
A straightforward drawing stencil I made while I was a marine engineering cadet. Part of a cadet's sea phase involves drawing the many systems found onboard a ship. These systems contain valves, pumps, regulators, filters, gauges, and…
Use at your own risk. PLA itself is generally food safe, however your printer is not. I intended this as a single use item, as the ridges created when printing is the perfect place for bacteria to grow. I created this when decorating my…
VW California piping rail eyelet Print Settings Printer: Multirap 420 2Move Supports: No Resolution: 0.2 Infill: 25% Category: Automotive
We have been using a Guinness glass for this, but it was not quite tall enough.
Holder for filling piping bags. Bottom is thicker to add weight so it will not tip while filling. Tapered from top to bottom.
I did NOT originally design this model and would like to direct you to the original creator. The model “Piping Tip Organizer Gridfinity Bin” was originally created by “Patrick van der Leer” on Printables and can be downloaded here : Or…
Easy to make piping tip! printer information: Supports: no Hope you enjoy!
A piping bag tip for use in a Ziplock, I made this so you can use a piping bag without paying for a whole set. Print in PLA, no supports. Sadly one-use, because it is very difficult to clean. Side Note: The picture looks very bad because…
I needed spikes to hold spray mister pointing down to water my bonsai trees. The spike comprises (1) a stem providing height and (2) a spike with holder that pushes into the pot/soil. There are different stems, all fitting in the same…
I have built a dust collection system for my workbench. I needed some custom adaptors for the different piping i use and Blast gates. The idea is that it always cup the intake and goes inside the outtake everything is parametric so if you…
Just print the part two times, place them around the keder and screw them together with a M3 screw. The free hole is to thread a string through.
Ventilation adapter for core one for attaching to 120 mm pipe, printed in PETG with organic supports.
Material: PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / Support Tree Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
Since I couldn't find this end cap anywhere, a member of the Ducato forum created it for me using Fusion360. Maybe someone else besides me could use it too.
In case you want to use for example a Gardena coupling in your shower. Converts ISO pipe thread R20 to R15. You need a gasket also, included. Possibly some piping tape also because it can be difficult to get it water tight. You can…
Scale it to 94-95 for the original grunt size (1.85m tall) after you scale it 100000%. It should scale it 100000% on it's own. It's the green box the combine grunts from half life alyx have on their backpack strap. I used the game model…
This sub-model consists of the piping of side 1 for the LUT Cross Section model. These pipes include the deluge pipes to protect the swing arms from the flames of launch.
This sub-model consists of the pipes for side 2 for the LUT Cross Section model. The side 2 pipes consist of the ECS (cooling) and various water pipes.
This sub-model consists of the piping parts for side 3 of the LUT Cross Section model. These are the LOX (liquid oxygen) and LH2 (liquid hydrogen), the fuel for the rocket.
This sub-model consists of the piping parts for side 4 of the LUT Cross Section model. Side 4 has various pipes. The ones I have been able to identify are hydraulic fluid lines and gaseous helium.
Vent brace for 50mm internal diameter tubes or fittings. Designed for use with 60mm external diameter fittings, as this leaves the brace flush with the tube. Two parts: external fitting and internal ring. Designed to be used with 0.5mm…
Description Keep your decorating station clean and organized with this Modular Piping Bag Stand . The design consists of three parts : Universal base Interchangeable holder (Small or Large) Removable non-slip rubber protector that fits…
just a simple Edge clamp for 16mm piping.
Whether you're piping rosettes, swirls, meringhe, borders or classic star tips, this nozzle offers an alternative to disposable or metal tips; easy to clean and reuse. Features: Produces star shapes Easy to print, no supports needed Great…
Coolant manifold piping designed specifically around a generic HT07-4A turbo. The HT07 turbo comes in a number of varieties so please confirm fitmet with a test print in PLA or similar. This is intended to be used as a functional…
2x1 gridfinity bin for bernina seamguide with foot 97(D) and piping guide. Includes the screwdriver and place for the screws. Don't have the piping guide so if anybody can confirm it fits... looks about the same. Or you'll have to wait…
These piping feet are compatible for all listed machines and many more that use the singer 111w foot system. I printed with tough resin on an sla printer. I didn't use my fdm printer as tolerances need to be tight but it will probably…
Parametric assembly of two weld neck flanges with raised face and bolt holes. Параметрическая сборка двух приварных воротниковых фланцев с зеркалом и крепёжными отверстиями. Standard: DIN EN 1092-1 / ГОСТ 33259-2015 Included STEP models:…
Mounting Plate with internal piping
A tall cup that holds a piping bag open while you fill it: drop the bag in tip-down, fold the top over the rim, and spoon in icing, cream, meringue or mashed potato with both hands free. Also stands a filled bag up between batches, holds…
Used PETG. Recommend 100% infill, used 40% thought. Other part is conical and I printed it flipped 180 decrees to ensure sharp edge. You also need a 4 mm x 50 mm bolt for installation. Two models. The opened one to enable installation…
Short-radius and long-radius 90° 3D elbows per GOST 17375 and equal tees per GOST 17376. Крутоизогнутые отводы 90° типа 3D (R=1.5DN) по ГОСТ 17375 и штампованный равнопроходной тройник по ГОСТ 17376. Standard: ГОСТ 17375-2001 / ГОСТ…
Tried to make it more durable but as close to the original as possible.
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
Use these super cute piping bag organizers to keep your piping bags tidy and readily accessible, with two fingers you can quickly pull any size piping bag out of the container and the next is ready to go. There are three sizes of…
A PVC pipe (2 inch diameter) cap that is used during concrete wall creation that require embedded electrical piping conduits to cap the ends at the form wall interface. Slides inside the end of the pipe tightly and can be nailed to the…
VW California piping rail eyelet Print Settings Printer: Multirap 420 2Move Supports: No Resolution: 0.2 Infill: 25% Category: Automotive
Piping Rail Hook for VW California / Multivan 12.3.2018 - added double hook Print Settings Printer: Multirap 420 2Move Rafts: No Supports: No Resolution: 0.2mm Infill: 25 Notes: support for double hook Category: Automotive
