Liczymy pasujące modele…
This model serves as a replacement for the original adapter. It is available in two variants: a faithful replica of the original design and an optimized version specifically tailored for printing. The optimized model accounts for reduced…
Wydruk około 2,80 €–3,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kopoflex 50 rozbočka
Wydruk około 7,22 €–8,83 € nettoWstępna wycena jednego wariantu
Kopoflex 50 víčko
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
Needed to deepen the subwoofer in to the front of the speaker box so i made a guide for the router. you need a 5mm bolt and a 5mm drill the routerbit is 12mm wide
Wydruk około 4,74 €–5,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use when you want to split wire protected in a hose. Especially outdoor usage. If you are going to put it the ground use ABS.
Wydruk około 3,82 €–4,66 € nettoWstępna wycena jednego wariantu
Kopoflex 50 spojka
Wydruk około 2,81 €–3,44 € nettoWstępna wycena jednego wariantu
Designed for connecting two copoflex pipes. Use ABS
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
Náhradní spojka pro vlnitou chráničku Kopoflex průměru 63 mm. Určeno pro případ, kdy originální spojka chybí nebo je poškozena. Díl je navržen pro přesné uchycení – chránička zaklapne na obou koncích. Pri instalaci se musi pouzit trochu…
Wydruk około 4,90 €–5,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
osVAC Adapter for Bosch POF 1400 ACE
Needed a guide bush for my Parkside POF 1200 D3 router. Printed from PLA with 25%+ infill.
I bought my router from Ebay, the adapter for my ShopVac was missing. So I designed a new one! The screwholes are to small, they are 5mm, you need 6mm screws! Print instructions I printed it with PETG, PLA should be fine, too. Standard…
See how to create 3d models from AI (image-to-3d / prompt-to-3d) here: https://www.patreon.com/posts/how-to-use-ai-to-120617822 Models in this collection: hippofolk giff wizard hippofolk giff artificer x 4 hippofolk giff barbarian…
TLDR: Round router base for the Bosch POF 1400 AOE to always keep the same distance when routing along an outside support, regardless of the routers positioning. I made this base, as the original one has a flat part at the bottom.…
I didn't want to pay for the actual Stewmac binding guide so I more or less stole it >:) Here is the actual thing if you want a much better one. Hardware M3 x 5mm (1x) M3 x 15mm (1x) M3 Nut (2x) – a nylock nut would also probably work M3…
I created this base plate for a Bosch POF 1400 router. It can be routed into a cabinet to make a DIY router table. There are some insert plates too for different router bits diameters. The insert plates are held to the base plate by…
Fine adjustment. Se youtube for part that has to be removed inside maschine.
I created this insert plate for the Bosch POF 1400 router. One file has holes for the router lift I purchased on Etsy. It's still not a great router to be put under the table because of the fact that it can't plunge very deep but in some…
Add on brush guard and bumper for semi truck. Let me know what you think or if there's anything that I could do to make it better. Thanks
I needed a dust extraction solution for routing edge profiles. This dust extractor for the Bosch POF 1400 ACE makes use of the mounting points for the fence. Two 8mm rods of ~250mm are press fit in the holes. Good friction fit on Festool…
A Cap that locks into the bushing holder of the Bosch POF 1400 ACE. It helps with dust extraction when edge routing
This is a quick and dirty edit of Vfrgaz's upload here: This is a quick and dirty edit of Vfrgaz's upload here: https://www.crealitycloud.com/model-detail/creality-k2-pro-poop-chute-slide-box I didn't want the bin, and at the time of…
When shaping wood from the side, the suction from the top is no longer sufficient. This model consists of five parts, with the lid printed separately and then glued onto the housing. Two M4x25 hexagonal screws are used for fixation. If…
Spojka je určena pro opravu poškozených elektroinstalačních chrániček typu Kopoflex o vnějším průměru 40 mm. Umožňuje rychlé a pevné spojení dvou konců chráničky, a to i v případě, že jsou již uloženy v zemi. Ideální pro opravy bez…
I used the PCB from this hard drive enclosure: https://www.amazon.es/gp/product/B081N1NM18/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Print Settings Printer: uwu Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 10 Filament: Whatever…
Just adapted part for quick replicate and one for cross-connction. Updates which will come (if response and intererst is high enough): other groove dimensions 45° and 180° connectors nice cover caps (individual payed versions possible on…
Title says it all. Needed a hose adapter to connect Bosch POF 1400 router to Workzone/Ferrex ash vacuum cleaner.
An adapter that enables the Bosch POF1400ACE to be used on/with the FSN rails. It uses an amended version of HAMMER_T's baseplate which was adapted to be screwed onto the rail guide. The rail guide is unchanged Rail_Adapter.stl from…
Kopoflex rozbočka 2x 25mm 1x 25mm
Remixed version of drhollen's ZWO Seestar S50 light/dew shield - baffled that is automatically pushed off if the scope closes while it's fitted. I heated the top of the collar (opposite the push off tab so I could flex it to give a snug…
Adaptor to mount the Bosch POF 1400 on a FSN rail. Also included are some pins so that it works with RA32 rails. Effectively making this a poor-mans FSN OFA adaptor. The lower part of the pins have a width of 4.1mm, which comes out…
Die sonst schon vorhanden Modelle im Netz erlauben es nicht das ankommende Kabel in die gleiche Richtung auszurichten wie das abgehende Kabel
Kopoflex rozbočka 2x 32mm 1x 40mm
Bathtub Spa "Jet Capoffs" (Jet Cap offs) Helix Size (Threads): 3/4" -10-1; Diameter: 20.33; (Ptich: 2.35mm) Type A: For rear, longer Type B: For sides, shorter Cap: For main intake Unfortunately there's no model data available for the…
Reducing adapter for KOPOFLEX corrugated conduit (40 mm to 16 mm)
Model The FCStd-files have been made with FreeCAD 0.18. Print Settings Nothing specific. Lessons' Learned I've printed the first test with 10% and 2D-grid infill pattern and while tightening, I could hear the first crackling noise. So -…
Pruchodka pro vyvedeni kabelů v kopoflex trubce v tepelné izolaci do podlahy/stěny
This is a model of the apoferritin protein from Pyrococcus furiosus at a scale of 1 to 10,000,000 and at roughly 6 Angstrom resolution. One millimeter in the printed model is roughly the size of a hydrogen atom. A very similar, human…
Boquilla 0.4 Category: Keychains
Řešil jsem jak na vodoměrnou šachtu, jímku z polypropylenu napojím husí krk (Kopoflex 40mm). Jímka má radius 1200mm což je dnes standard pro většinu vodoměrných šachet a čerpacích jímek. jednalo se také o problém jak vyřešit utěsnění, tak…
Aufsatz-Adapter (ohne Befestigung!) zum Planfräsen.
spojka na spojení bez protahování kabelů pomocí zdrhovaček
Źródło oznaczyło ten model jako treść 18+.
Aufsatzadapter (ohne Befestigung!) für die Oberfräse.
Šroubovací spojka pro spojení kopoflexových potrubí o vnějším průměru 16mm. Takto spojené tyče se používají při rybolovu pro označení místa pro přikrmování. Určeno pro kopoflex s vnějším průměrem 16mm vnitřním 13/14mm Spojky se slepí a…
spojka na spojení bez protahování kabelů pomocí zdrhovaček, Y tvar
Spare part for a broken lever on the Parkside POF 1200 D3 router. Print instructions Perimeters: 3-4 Infill: 15-25 % Supports: No supports required
The original step buffer for a Bosch POF 1200 AE or Bosch POF 1400 ACE has a step size of 3 mm. Sometimes it's a bit too coarse. So I created step buffers with smaller step sizes ranging from 1.0 mm to 3.0 mm.
Working Stepoff Brace models, created to aid in design changes. 3 models included. Step files included Please leave a “Like”. Thanks for downloading.
Parkside POFA 12 wall panel holder
Recommended Print Settings: 0.15-0.2mm Layer heights 15-20% infill NO supports Brims/Skirts not needed Before Printing: Check your Z offset height/bed Set up your retraction settings DRY YOUR FILAMENT! and lastly, Happy printing!
When printing the one with the button, make sure its on the side with no supports or it wont work.
Safety clip for Karpofly paragliding harnesses. Remove one of the hooks for closing the pod and attach the clip with a short cord to the chest strap then close pod with the clip. This way the cockpit hangs around your knees if the getup…
The overlay should be printed from a strong filament like ABS or nylon. I haven't print it yet, but I will soon. I'll check it out and add a comment if I have any comments. Trademarks are the property of their respective owners.
The overlay should be printed from a strong filament like ABS or nylon. I haven't print it yet, but I will soon. I'll check it out and add a comment if I have any comments. Trademarks are the property of their respective owners.
Ersatzteil für die verstellbare Anschlagscheibe der Tapofix CB 75 und CB 800. Das Modell wurde entwickelt, um eine beschädigte oder verlorene Anschlagscheibe schnell und kostengünstig zu ersetzen und die volle Funktion des Geräts…
The overlay should be printed from a strong filament like ABS or nylon. I haven't print it yet, but I will soon. I'll check it out and add a comment if I have any comments. Trademarks are the property of their respective owners.
The overlay should be printed from a strong filament like ABS or nylon. I haven't print it yet, but I will soon. I'll check it out and add a comment if I have any comments. Trademarks are the property of their respective owners.
The overlay should be printed from a strong filament like ABS or nylon. I haven't print it yet, but I will soon. I'll check it out and add a comment if I have any comments. Trademarks are the property of their respective owners.
The original step buffer for a Bosch POF 1200 AE or Bosch POF 1400 ACE has a step size of 3 mm. Sometimes it's a bit too coarse. So I created step buffers with smaller step sizes ranging from 1.0 mm to 3.0 mm.
Add on brush guard and bumper for semi truck. Let me know what you think or if there's anything that I could do to make it better. Thanks
