Liczymy pasujące modele…
Bra strap slip buckle is needful aid for every woman. Just pull shoulder straps through the buckle and your underwear will never be protruding out of your top or evening dress. 0.4 nozzle 0.10 layer infill only perimeter Spona na…
Printsettings: Nozzle 0,4 raft -yes support - yes slow print 0,12mm First layer height 0,12mm layer height ironing - off
protector para fan
95A tpu from anycubic supports on 0.24mm layer height .04 nozzle
LoRa APRS Case for 2.4" OLED version 1
Vyrobil jsem prsten kompatibilní se standardními stavebními kostkami LEGO - skvělý způsob, jak nosit své výtvory všude s sebou! Dostupný je ve třech velikostech: 60 mm, 56 mm 52 mm (obvod prstu). Pokud byste chtěli jinou velikost, dejte…
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
Remixed, enlarged 150% and added 6x3mm recess for magnets
Description: This 3D-printable vacuum cleaner adapter connects the TACKLIFE PRS02A orbital sander to vacuum hoses with 32 mm, 35 mm, 38 mm, and 50 mm outer diameters. Improves dust collection for cleaner sanding. Easy to print with no…
Printsettings: Nozzle 0,4 raft -yes support - yes slow print 0,12mm First layer height 0,12mm layer height ironing - off Material: PLA
A headstock for my Printable Fretboard, modeled after my 2001 PRS Santana SE, not 1/1 in terms of it's shape but pretty close! Had to make it a bit longer near the neck to accommodate the screw. Split into separate pieces so the tuner…
These were designed to fit the PRSB401R Kit towers Parts should be printed solid in TPU for best results. The guard mounts using zip ties.
Testovací modely velikosti prstenu R06 z aliexpressu. podrobnosti viz tabulka na obrázku
I am also adding the 3d model file so you can edit the hole diameter and location. I don't know how to design it to be multi-colored. I printed it from black PETG material and painted the "Custom" text white.
A small box with dovetail lid for storage of spare AA, CR1/3N, and 2032 batteries for accessories such as Kestrel, Send-It, and Scope illumination. Uses 4mm x 4mm magnet for lid closure.
Je to lehký model prstenu na ukazováček. Na přední straně má nápis ‘Ginger’ jako zrzek. Má rozměry 31mm na 24mm na 14mm . Model je vytvořen v Tinkercadu žákem 8. třídy na základní škole.…
1.5 ml and 15 ml adapters for free swing bucket rotors used on soewall centrifuges tested on H6000A upto 6000 G
Tisknuto na MK4S 0.4n_0.2mm_PETG Box na žetony - 3x tisk Box na žetony horní díl - 2x tisk Box na karty - 3x tisk Záložky od každé - 15x tisk Přiložená fotografie run je k vytisknutí, vystřižení a vlepení vámi zvolených run do oušek…
Prsten s nábojnicí / Bullet Casing Ring velikost / size: 21,6 mm
Trust Rod cover for the PRS Silver Sky SE with the Core model shape.
This slider is for the old repairstand from parktool PRS-21/22 (dont know if the new one has the same size) to get the possibility to mount bikes with axles. Personally i needed one for 20mm Axles. BOM: Some durable Filament…
Tyto pečetní prsteny jsou v deseti velikostech - 5,6,7,8,9,10,11,12,13. Nenechte se splést 3d vievrem- otazníky jsou natočené správně a když je obtisknete budete příjemně překvapeni. Když je namočíte do inkoustu můžete s nimi tisknout na…
Nabízím prsteny s vystouplými reliéfy , vhodné třeba jako dárek. Jsou k dispozici různé barevné kombinace ale mělo by jít si barvu zvolit dobrovolně. Vnější rozměry všech prstenů jsou 29.75 x 24.60 x 15.31 mm . (Prosím vyzkoušejte a dejte…
Skvělý stojánek a držák na telefon ve tvaru prstenu v jednom. Už žádný umatlaný displej či pošpiněný obal.
Návrh prstenu s firemním logem. Logo je samostatný soubor, proto se dá do prstenu vsadit (vlepit) i jakékoliv jiné logo či objekt, který vyhovuje daným rozměrům. Vhodné spíš pro tiskárny SLA.
Another model of my jewelry box - now for rings, pendants and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: Další model do mé série…
Prsten do kterého lze vložit kousek filamentu jednoduchý ale stylový šperk
VAROVÁNÍ: Neberu žádnou zodpovědnost za vaše prsty. Průměr prstu je max. 20 mm, dětský prst to nesevře. Jedná se o pokusný model sci-fi pout z nějakého filmu. Funkční. Tištěno z PLA, 15 procent infill, ale lepší by bylo aspoň PETG CF.…
This print fits Park Tool PRS-2 & PRS-3 Repair Stands with a 44.25mm (as measured) column. With an interior print of 44.5mm the press fit design has enough friction to stay in place without hardware. It has space for the following items:…
This is a modified version to have several different layer heights for multicolor printing.
Composite holder for one toothpaste and at least two toothbrushes and toothpaste, includes removable drip tray and feet.
A cover for the old e-reader Sony PRS-650 Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 5 Category: Tablet
I dont have this stand so I havent personally tested it, but the rail interface works
This set of cavity covers was modelled after the factory-fitted tremolo & control cavity covers on a PRS SE Custom 24-08. The blank cover model can be printed with the outer surface lying on the print bed, so that it picks up the texture…
Simple ring I made just for fun. PetG, PLA. Better to use light color, silk filament. Outer brim recommended.
Vyrobil jsem prsten kompatibilní se standardními stavebními kostkami LEGO - skvělý způsob, jak nosit své výtvory všude s sebou! Dostupný je ve třech velikostech: 60 mm, 56 mm 52 mm (obvod prstu). Pokud byste chtěli jinou velikost, dejte…
This is a replacement for the backplate for the PRS SE CE 24 electric guitar. You can customize it however you like
I made this to brace the tremolo of my 2025 PRS Core Custom 24 in a fixed position, effectively turning it into a fixed bridge. This was to help with tuning stability, since I typically don't use the floating tremolo feature of the…
This is a set of custom truss rod covers for PRS SE Custom 24 guitars. The first print plate contains basic, blank covers, including one modelled after the factory-fitted cover and two other shape variations. You could add your desired…
I made this to brace the tremolo of my 2017 PRS SE Custom 22 in a fixed position, effectively turning it into a fixed bridge. This was to help with tuning stability, since I typically don't use the floating tremolo feature of the guitar.…
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
Remixed, enlarged 150% and added 6x3mm recess for magnets
A replacement tuning peg for the early models of the PRS P20, which were prone to breaking.
EN: Watch holder with ring tray Suitable for small to medium size watches up to 41mm in diameter. Comes with a ring holder. Wall mountable with double-sided adhesive tape. Print: PLA, Fuzzyskin, 0.4 nozzle CZ: Držák hodinek s miskou na…
El modelo se monta con 4 tornillos de 2 mm, la antena GPS va en un lateral, en un hueco preparado para ello, preferiblemente , imprimir en PETG, para evitar problemas de sobrecalentamiento en un vehiculo. He publicado una carcasa frontal…
An Adapter for a Kreg PRS5000 Router Lift to suit a 65mm Router. The fit is very tight to make sure its super secure. Options for Smooth or keyed to a Makita RT0700C. Fusion files included. Print Settings Printer Brand: Creality Printer:…
A simple collar adapter for a Kreg PRS5000 router table to support a 65mm Router like Makita RT0700C Options for smooth or keyed for the RT0700C. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
This is an ereader stand, an other one ! But specifically for the Sony PRS-T2 ereader (don't print it for kindle, kobo... the spacing for your tablet may not be ok, you may not insert your ereader or it may be too loose) I ve made this…
Part of the trigger of my glue gun broke, so I made myself a replacement Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 How I Designed This Calipers, photos and a ruler Category: Parts
Update 2.12.22: step-Dateien hochgeladen / step-files uploaded Einlegeringe für Kreg Fräsplatte PRS4034/PRS4038 Im Lieferumfang sind 3 verschieden Einlegringe, die mir nicht ausreichten. Ich habe daher selbst weitere erstellt, darunter…
Dies ist eine Aufbewahrungsbox für Einlegeringe der Kreg Fräsplatte PRS4034/PRS4038. Auch für das Montagewerkzeug ist ein Fach vorgesehen. Die Box wurde in FreeCAD erstellt, die Zeichnungsdatei ist beigefügt. Einlegeringe für die…
Funda para e-reader Sony PRS-T3. La tapa incluye zonas resaltadas para piezas magneticas (no imanes) de 1mm de espesor para mantener la tapa cerrada. No se marca la zona de imanes para el auto-encendido porque no consigo que se mantenga…
Casing for Raspberry Pi Zero + Waveshare GSM / GPRS / GNSS / Bluetooth HAT - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
Vytiskni, vykroj, upeč a pochutnej si. Dle svého si každý dobarví :)
I didn't find any guitar rings anywhere. So here is my design. 100% scale is size 50 (EU ring size). Scale as you need. I found out it is better to print flat on the tip. Does not scrape strings. Print with supports on the pad for better…
My previous model was a bit rough and kind of bad on the back stroke. This one is made to be more print friendly. The size of the ring is 53 (EU size; inner diameter 16,9mm). I post 2 models. One is what I use. The other one is mentioned…
Electric Guitar model based on PRS Mark Tremonti model. STL file is more or less 1:1 scale. For printing I've used 0,3 scale factor, in my opinion it give best results. Neck is divided in 2 pieces for easier printing. Neck head is flat,…
Zázračný prsteň, ktorý nás zbaví všetkých starosti. Návod: treba ho stiahnuť a vtlačiť ;) ))) Prsteň je navrhnutý pre SL1 tlačiareň. Ak sa vám moje modely páčia, nezabudnite ma podporiť pri ďalších výtvoroch! Print instructions Použite…
The PRS birds are arguably the coolest inlays, they fit the sunset model well, and my guitar case needed a decoration. I made the full and outline bird versions. Tons of colour combos work or use a simple all white or black, whatever…
New design with nicer shaping to the headstock More stability: Gap added for cfk flat bar 3x0,8mm Needs 1 nut M3 and 1 screw M3x15 to M3x20 1 version for (my) USA PRS Custom 24 (1990) 1 version for (my) PRS SE Custom 24 (2019) make a…
Ve škole používám při demonstracích optických zobrazení na magnetické tabuli pětipaprskový laserový zdroj (asi Didaktik / NTL??) . Někdy se ale hodí mít jeden, tři, nebo čtyři paprsky. Doposud jsem to řešil elektrikářskou páskou.…
Print with the top angle of the pen flush against the bed, use maximum supports.
Model se skládá ze čtyř dílů. Základna se sloupkem v podobě kmenu stromu s háčky + kryt ve tvaru klece + pojistný šroub + záslepka šroubu.
Must be printed in TPU as the hole is made to fit snug on the radio face. Will NOT work in other materials
Krabička na prsten slouží k tomu, aby se do ní dal prsten a zavřelo se to.
This is a rugged case for your LORA-Aprs TTGO T-Beam device with SMA antenna plug. Thanks to Breeki for permission to remix and publish. I modified his great work and added clearance for the printed circuit board so that each version…
Currently Making Upgrades Please be patient. Also Manual in the works. This conveyor can be used to transport your purge pellets to the edge of the table to drop into a trash can. Remove the need to empty that bin behind your printer of…
Model prstového bludiště je určen především pro předškolní děti. Využít ho lze nejen pro hledání cesty, ale i pro procvičení motorických schopností dětí. Je zde lehčí a složitější varianta. Bludištěm se nepohybuje kulička ale jezdec,…
