Liczymy pasujące modele…
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
Summary: A lightweight, super thin, replacement facial interface for the PSVR2. The design is as close to the lenses as is possible, Every user can achieve the max FOV possible. Weight: 28 grams vs 62g on the lonny-k model (including…
Simple yet effective under the desk mount for DC adapter delivered with PSVR2 PC adapter. Snug fit so it will not move easily.
The design was originally intended for mounting with flat head (chamfered) #6x1" wood screws, however alternatives with solidified, enlarged bases and insets are provided to enable mounting with double-sided tape. Note that the insets on…
Remixed for those who would like to mount it to their sim rig. Use 6mm hex bolts.
Printed in PETG. Designed for drywall screws. Adapter slides in and is held firmly by two tabs. Tolerance is tight.
Since the release of the PSVR2 I have been searching for knuckles straps for its controllers, and there have been none,
I tried to use my Index controllers with the PSVR2 using space calibrator, but the IR emitting base stations interfere with the IR based camera tracking on the headset, so I made a way to do it natively by attaching a 3.0 Vive Tracker.…
I was pretty annoyed with the PSVR2 not having any built in head strap audio, so I picked up a Vive DAS on Black Friday for 16$ and used the headphones for this. I tried to position them so that they float over your ears like the Index.…
Comparing to Quest's controller PSVR2's grip button is very uncomfortable, espesially when you need to long press it to hold something, so I made this raiser to make it easier to press. Attatch to the controller with blue tack. Can be…
Will fit either Sense controller, print two! No supports needed! Printed in PLA at .2 structural on a MK4S.
It's recommended to print this flat side down with no supports. Make sure “Bridge counterbore holes” is set to “partially bridged” in Prusa/Bambu/OrcaSlicer so that the bridge layer is printed properly. For other slicers maybe just use…
PSVR2 Headset front scan for making custom mounts. Scanned with a Creality CR-Scan Raptor with an accuracy of 0.1mm. It could be more accurate than this, but I ran out of RAM with a 0.02mm settings so that's all I can do. In case you're…
I had a set of Kiwi clip-on headphones lying around from when I used the Quest 2, so I figured I could put them back to use on my current headset! These press a good bit on your ears, so you get a pretty solid sound from them. To attach…
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
These pieces are designed to make it straightforward to attach a Vive DAS to a PSVR2, using M3 nuts/bolts or hot glue/VHB tape. The stock facial interface needs to be unscrewed for the custom interface to take its place, the visor must be…
Stand to hold the controllers upright with an inset guide channel for the USB-C cables set into the base. Two versions are included + the CAD for both. One circular/spherical & the other rectangular for individual preference. The circular…
Attach your PSVR2 to the Meta Quest 2 headstrap for next-level comfort! This simple 3D printed adapter securely mounts your Quest 2 onto the Meta Quest 2 headstrap. Designed for the Meta Quest 2 headstrap and PSVR2 Snug, secure fit…
The top strap model remixed from LonnyK's DAS mount, with the strap loop shrunken to better fit the Rift CV1 top strap. Like the original model, the original halo strap must be removed. You will need the same screws attaching the original…
Thinner version of the facial interface replacement by LonnyKThinner version of the facial interface replacement by LonnyK. Gets you closer to the lenses; about 5mm.
This is a remix of the “PSVR2 IEM/Earbud Adapter” by s16n. Thank you! My version makes a few quality-of-life improvements: Wider cable channel so the earbud cable can loop back and forth up to four times without binding Corrected hole…
Summary: A lightweight, super thin, replacement facial interface for the PSVR2. The design is as close to the lenses as is possible, Every user can achieve the max FOV possible. Weight: 28 grams vs 62g on the lonny-k model (including…
Designed for 1.5" T-Slot extrusion. Required hardware: 4x M8 14mm hex socket head screws (16mm works too, in a pinch) 4x M8 T-nuts 2x M4 16mm - 20mm screws Print the base with supports for the underside. Attach top to base with 2 M4…
this is a fork of printables.com/model/1507930-psvr2-replacement-facial-interface-with-optional-i i fxxxking hated how the mask clips was designed so silly, because i printed the mask and broke it immediately. so redesigned a bit and made…
This is an attachment clip for a Playstation VR2 controller (PSVR2). It allows me to attach things solidly to the controller. I am using it for the purpose of attaching a drumstick to my controller so I can use it as a putter attachment…
Designed for use with my rig but maybe useful to a desk or other situations. Printing: I used PLA, and printed it the simplest way: pointing straight up with maybe 25% infill. That'll work fine if your printer has good layer adhesion.…
This works well for my PSVR2. There are a few choices for the base that add extra weight in the front to reduce tipping over backwards. See the STL files for the base choices. I printed the simple ‘front bar’ one at first and then the…
Fast 3d scan with Revopoint Pop2 3D scanner, some cleaning, smoothing and polycount reduction to 250k in Zbrush. Better scan to come but already should be enough for some projects. Simply mirror the model for the other controller.
This is an insert for the PSVR2 Sense controller that offers basic parity with the Valve Index Knuckles controller (the controller encases the hand so you can fully open your hand without dropping the controller, this is very helpful for…
All VR lens adapters out there have lens attached completely flat. Actual eye glasses mount lens at a slight angle forming a curved surface. For me, the flat mounted lens cause my peripheral vision to be distorted (straight lines look…
Protect PSVR2 USB-C plug and PS5 USB-C socket in case of accidental cable pulling to sides. Printed from PETG, 0.4mm layer, 15% infill. Any (almost) settings will work. Fusion 360 source included.
Scan of visor part of PSVR2, scanned with revopoint pop2 and revopoint mini. decimated in meshlab. incomplete , NOT 3d printing ready as not watertight, but might be enough for some projects. better scans might come. If you own a psvr2…
Update: V2 is released! Improvements include: Improved/intentional controller mounting spots previous spots to hold controllers were a happy accident Improved cable holder made it shorter, made the securing angle steeper Improved headset…
Print two times, one mirrored, for left and right hand side. Should be easy to customize if Headset does not fit. Headset connector just print two times, one mirrored Connector_Ziptie print two times, one mirrored use two zipties (max…
Use TPU The plug should be pressed through (it's separate to remove the need for support) Press the cable into the channel on each side Support should not be needed You could print the main body in PLA/PETG, but the plug really needs to…
Please look at the original: Playstation VR2 (PSVR2) Headset Stand (updated Mar 4) von psybertech | Kostenloses STL-Modell herunterladen | Printables.com
In this remix more room was added in the spool while also increasing strength at attachment point at base to decrease potential breakage. Height was increased in wire channel to accommodate both the aux plug and earbud wires. Note: photos…
I needed a place to put my PSVR2 away that helped to keep dust off of the lenses. This model also was made so that I could attach it to my Ikea Skadis board. I'm using 8/32" hardware to mount it as I wanted it to be secure.
couple of features charging cable tunnel , you can charge controllers while placing it on the stand print this completely supportless on FDM printer. have fun , i am starting a patreon where u can find my newer designs, please follow me…
Gcode files are PLA (I used Overture), .3mm draft, 15% lightning infill (For time/material savings). You will almost definitely need to turn off perimeters if you position on your own bed as well (Gcode should include this off by default)…
Cable clip that holds your VR headset cable on your belt. Easy print, no supports needed.
A very simple model to fix the new PSVR2 adapter below your desk. Screw holes are for 4x16 screws. Anything with a screw head diameter above 6mm should work.
Easy to print, minimal Skadis holder for Playstation PSVR2 to PC adapter
