Liczymy pasujące modele…
Simple holder for two Tamiya Modelling Putty tools. It's built on a Gridfinity Refined base, which is based on Gridfinity by Zack Freedman . Check out all of my Gunpla Organizers here.
I created this putty knife to spread wood filler on a flat 3D printed surface that I want to look flawless. It is 5-¼" long with a hole in the end to hand it on a nail. It requires no supports or brim. Mine was printed in PETG, but PLA…
A simple lightweight putty knife to fill holes and more! About <30min print-time.
These are used to make 3D scanning a little easier. Because one side is opened up, you can give most objects to be scanned a steady rest. If you want to use them with a little putty, just rotate the closed side up. Printing: Print in the…
support pour boite de pâte de camouflage peinture. diamètre interne 85mm pour 20mm de profondeur.
For whatever reason, I couldn't really find any good models online for putty knives or plastic spreaders, so I made this quickly in Fusion 360. I specifically needed this to spread caulk on a drop cloth to make a battle mat for our DND…
A simple Tinkercad design for a hand therapy tool. Two knob sizes, 8 cm and 7 cm. Print on its side and with several perimiters for greater strength. See 3mf file. I had good results with PLA.
Simple hand scraper or putty knife for all your scraping needs. Hand sized with a 20 degree edge. Easy to print, with 0.20 mm layers working just fine. Meant to be used with standard suet cubes, to chop them into manageable quarters…
i used 100% infill with tree support touching the buildplate
1x1 Gridfinity bins for Tamiya Modeling Putty and Polishing compound. There are 2 different size models. The model for the Tamiya polishing compound has a slightly larger cutout for the deeper and larger cap. I use these on pegboard…
Just wanted a easy and simple print for a disposable putty knife. Printer settings I used .4 nozzle 6 top and bottom layers, top concentric pattern and bottom concentric pattern 7 walls 25% infill cubic
When printing this model, use the exact same settings and filament as you did for the original stand. Deviating from these settings may cause the model to deform differently than the original. After printing the original vertical stand, I…
I needed this putty knife to spread drywall compound in a narrow space. It is 38 mm or 1.5 inches wide and 4.45 mm thick with a blade that is tapered to make it flexible. I printed it in translucent PETG.
All you have to do is put the mask on the figure attached to this page Category: Toys & Games
I created this putty knife to spread wood filler on a flat 3D printed surface that I want to look flawless. It is 5-¼" long with a hole in the end to hand it on a nail. It requires no supports or brim. Mine was printed in PETG, but PLA…
Holds a scraper or putty knife on a Skadis panel. Intended for metal blades as the majority of the weight must be in the blade for it to sit stable in the hooks. 3.0 mm slot opening for the blade. 35 mm clearance from the from the panel…
I bought a Warner 503 ¾" chisel from Amazon and the press fit rivet on the handle was installed incorrectly from the factory (it didn't seat and mashed off to the side making the handle be out of shape and lose). Did I return it? Heck no,…
Power Ranger Putty Patrol Mask to print in one piece. Print settings below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Mascara de Patrulleros de Power Ranger a…
A two sided small spatula for applying filler or glue evenly, and smoothening.
A simple lightweight putty knife to fill holes and more! About <30min print-time.
Small dish for mixing and using powdered wood putty (like Durham's) Combo scoop and stirrer for scooping, mixing, and spreading the putty once mixed. Printed the stirrer with 4 walls for stiffness and strength; no supports needed for…
There are many angled edges, multiple corner radiuses, and a fine tip. Its easy to wipe off. when it prints the bottom edge creates a sharp corner and the top is very tapered for a subtle edge. Fits in the hand well and lets your put…
Bought two of them in a budget store and their handles smelled bad so decided to make my own. It can be used as a replacement part if you broke your original handle. You put the metal ring on the handle. With the putty part you heat the…
Ikea Skadis putty tube holder for : https://amz.run/5aS3 Fit for a tube of 22mm
This holder is custom fit for the FlashForge Dreamer printer. It is designed to fit on the side of the unit where the removable grate is located. Very durable and provides a perfect fit for any bed scraper.
Quick putty knife that worked great for patching some drywall. The blade is just shy of 5 inches. Easy print on an MK3 with PLA at 0.2mm.
Summary UPDATE 1/26/2021: I have just added a version (Putty_Knife_Holder_Pegboard_Narrow_v2.stl) that is 203.2mm wide to fit on an Ender 3 v2. The original (Putty_Knife_Holder_Pegboard_v2.stl) is 215.9mm wide. I also added my improved…
Holds a 2oz tube of ep200 epoxy. hole is 27.5mm in diameter. Has a small indent for a magnet if you want to glue magnets to the putty tube to make it stay better but it doesn't need it.
This quick printing putty knife holder fits in the top aluminum extrusion to keep your putty knife off your table or desk and on the printer for easy access. Easily slides into the top extrusion on most printers with common aluminum…
PD_putty - a simple putty knife I printed this on my Bambu P1P with their basic PLA and standard settings and it took about 20 minutes and cost $0.22 so I'd say that's pretty good compared to going to the store and getting one for $1+.…
Easy an practical putty knife. I uplaoded the desig process on youtube :)
Putty knife for when you forget one at the hardware store and don't want to go back.
Print in a fine layer height with 100% infill. PLA should do just fine. Fight for the right to repair!
BORING Putty Knife & Glue Spreader - Set If you're renovating or do bigger glue-ups, this set will be perfect for you. We made them primarily because you never have one of these when you need it the most. But also because I aint gonna…
