Liczymy pasujące modele…
Update 21.11.2023: @SennedeValk_905437 spotted a small mistake in the body_82 part (thanks!). The mount for the qr part is not centered, it is slightly moved to the right. I'll fix this as soon as possible. I really liked the look of the…
Inspired by other creators, namely @bobby, I created what I felt was a more sturdy wall mount for my Fanatec wheels. I wanted the base to be thicker as it needs to support quite alot of weight and for the wheel to sit close to the wall to…
I designed a cap for the Fanatec QR1 wheel base, since I added lube to the QR1 to get older wheels easier off the quick release, all the dust sticks to it. This dust cap will prevent that. This is an MMU version with the Fanatec logo…
QR1 Lite is known to have quite big clearance of the sides of the cutout causing noise clicking and adds “dead” movements when turning under load. Common “fix” is piece of electrical tape wide enough to cover sides of the cutout, I tried…
Mount your QR1 equipped wheels from Fanatec vertically, also on IKEA SKADIS pegboards. I designed this mount in 4 different versions. Each can be mounted differently Base Mount Version Info “Clean” Can be mounted using double sided tape…
Remix of the Fanatec QR1 wheel mount in order to attach it directly to an 8040 profile of your simrig
Fanatec DD1/2 StreamDeck Mount Intended for owners of dedicated sim rigs used for both flight and racing. Allows you to mount an Elgato Stream Deck to a Fanatec DD (QR1) quick release when switching from sim racing to flight sims (will…
The Inventor model has 2 parameters “Wanddicke”= wall thickness and “Bodendicke”= bottom thickness. Change them to your needs. Keep in mind, to change the layer height accordingly. The provided stl files have a wall thickness of .6mm and…
The hole diameter is a little big i will fix that soon. Please download all the other files here: https://www.printables.com/de/model/427891-fanatec-wheel-stand-qr1/files .
Prints without supports. I used PolyTerra White PLA and 0.2 mm layer height. See images for Strength settings.
From time to time when I hit big bumps (maybe more often than I like to admit) my QR1 make a loud clicking sound, it came from the release handle and the hold down screw. So I created a small clip to fit between the screw and QR handle. I…
Ganz einfach zu drucken. Wird mit einer Schraube befestigt und ist somit stabil. Ich habe vorher einen Dübel in die Wand gebohrt/geschraubt, damit die Wandhalterung noch stabiler an der Wand sitzt. Man kann das Lenkrad nicht nur einfach…
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights. I my case I wanted to fit specific tunable-white LED spots from ConstaLED into an “Ronka” luminaire from Arcchio. I…
Fanatec DD1/2 StreamDeck XL Mount Intended for owners of dedicated sim rigs used for both flight and racing. Allows you to mount an Elgato Stream Deck XL (32-key) to a Fanatec DD (QR1) quick release when switching from sim racing to…
I’ve designed this custom steering wheel stand specifically for Fanatec wheels with the QR1 quick release system, to help display and organize wheels in a neat and accessible way. While I don’t own Fanatec wheels myself, I created this…
Fanatec DD1/2 StreamDeck V1 Mount - X2 Version Intended for owners of dedicated sim rigs used for both flight and racing. Allows you to mount 2 Elgato Stream Decks (V1) to a Fanatec DD (QR1) quick release when switching from sim racing to…
The Fanatec QR1 sadly has some issues with loud knocking noises when you experiance higher forces, usually on kerbs. To reduce that you can use the locking screw but that still has some play which gives you a nice metal on metal noise. So…
Holder for Fanatec wheels with QR1/QR2, mountable with M6 screws to your aluminium extrusion rig or with simple countersunk screws to a wall or wood.
Fanatec QR1 Hub to mount spare wheels to extrusion rig OR if you print a little lower to remove the rear tang it can be wall mounted with a single screw. Use paint on supports as shown Printed and tested in PetG.
Combined a QR1 wheel base connector to a QR2 steering wheel mount. This is a first draft of an idea. Category: Gadgets
PXN GT One to Fanatec QR1 / QR1 Lite / QR2 Adapter (60mm Extension) This adapter connects a PXN GT One Steering Wheel (50.8 mm pattern) to Fanatec QR1, QR1 Lite, and QR2 systems. It provides a 60mm extension for better clearance and…
Fanatec QR1,suport for original connector. U will need 4 m3 heat inserts. Regular m5 screw with hexnut can be used for tightening ring,but nut from bicycle clamp is better and faster option.
Fanatec QR1 to Moza Multi-function Stalks Auto Cancel Trigger This triggers the Auto Cancel feature for the Turn signal stalk, similar to what is shown in this youtube video ( https://youtu.be/6kAldZCjieg?si=Vc8oC_EFhBl4sKFx ) The video…
This design will let you put on any racing wheel with 60mm hole diameter to a Fanatec wheel base with the QR1 system 5x 7mm steel balls are needed printed the final version in PC Blend but PETG also worked fine print settings 0.4 nozzle…
Universal Tanleki Emulator Keeper (QR1 / QR1 Lite Remix) Credits & Inspiration This project is a remix and simplification of the QR2 Tanleki Emulator Keeper . Huge thanks to the original creator for the initial concept! This version has…
This design will let you put on any racing wheel with 60mm hole diameter to a Fanatec wheel base with the QR1 system 5x 7mm steel balls are needed printed the final version in PC Blend but PETG also worked fine print settings 0.4 nozzle…
Universal Tanleki Emulator Keeper (QR1 / QR1 Lite Remix) Credits & Inspiration This project is a remix and simplification of the QR2 Tanleki Emulator Keeper . Huge thanks to the original creator for the initial concept! This version has…
