Liczymy pasujące modele…
This page contains the instructions and files for printing and assembly of the throttle quadrant module. (electronics and other details for the whole unit on main page “ OpenFlightSimConsole base ”) Fusion 360 model is provided for anyone…
Improved large levers and switch addons for the Logitech/Saitek Throttle Quadrant. Inspired by Diamond DA62. Print the levers twice for Twin Engine, Small Lever can be used for brake or speedbrake. Optional Switch addons (for flaps, gear,…
I've wanted a trim wheel for flight sim stuff for years but the old Saitek model isn't made anymore and examples on eBay are rare and cost a fortune so I decided to make my own. This is built with an Arduino Leonardo, some 3d printed…
!! Do not print this (yet) !! Small Update 20.09.2022: Pictures of the MVP are now up, and I still have some software bugs, but everything mostly works. The parts uploaded can build a throttle, but I'm still far from the finished product.…
Quadrant – Coffee Table (No Hardware - No Support) Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_ This is Quadrant, a coffee table inspired by the…
Just a simple split of the lid posted by JEng.
As i needed a new throttle quadrant i took this brilliant design and scaled it down to 87% as i needed it a little smaller. Additionally i changed the design a little according to following of my rules: - Simplification - Print more and…
Simple 3D printed throttle lock for the TCA Quadrant, locks the two throttle levers to become one. For TBM930 / VisionJet style of aircraft. Installation - Slide lock over left side of the throttle, add clip, line up both trottles, push…
Modern and stylish pencil holder in diffrent sizes with several compartments. Size: number of compartments x width of compartment in mm x total height in mm Printed in PLA with a layer height of 0.2 mm. No support needed. Ask if you need…
Fits two Saitek Logitech throttle quadrants to mount flush wether as side quadrant or overhead. Units securely attached with aligned screw holes. Tight fit- hold both units together when inserting as there is a dimple/recess on the sides…
Introduction I am new to the flight simulation hobby, 3D printing, and CAD design, so please be patient with me. I decided to create my own throttle quadrant to enhance my immersive experience. This is intended for flight simulation…
Print Settings Resolution: 0.15 Infill: 5-10% Notes: Has some steep angles so recommend a fairly high resolution. Only the prop head requires support. How I Designed This I was inspired by internet pictures of Piper Arrow throttle…
Remix of: https://www.thingiverse.com/thing:2203766 Work colleague has a major love for the XCub and wanted knobs to suit. Started with Stephen's Piper Arrow knobs and tweaked to suit. We went through a few different iterations of the…
Ever wanted to use realistically modelled PA-28 controls for your Honeycomb Bravo Throttle Quadrant? Or maybe you want well made controls with larger and more comfortable knobs than the stock GA ones? Perhaps you often fly in VR and find…
Adjustable quadrant sight for the can cannon. Drill 9/32" hole and self-tap a 1" long 8-32 screw. Self-retaining on rail
allows the Saitek throttle quadrant to be mounted at an angle.
Flaps Spoilers und 6 Tasten Panel für einen zerlegten Saitek Throttle Quandrant zur Motage an ein Holzbrett oder Ähnlichem. Die beiden Potis kommen in die rote Halterung und werden doch befestigt. Der 3. Poti bleibt frei. Die Platine aus…
This instrument helps for computer users to create a confortable work enviroment. I was looking for a description of the optimal positions for an ideal computer workstation. I found many, and some of them contradicted the others, but what…
Update You might be interested in an awesome remix of this project done by X-Rush and available at this link . Their updates to this model: Added support for the FSM-GA module to add stability and rigidity to the whole model. Also changed…
This is a travel limiting stop for the Saitek flight simulator quadrant. Prevent accidental thrust reversing at bottom throttle! With a light pull of the tab you can bump the lever down to hit the switch. I used this spring kit:…
This is a filter holder / pad holder / cup holder for a Philips Senseo quadrante. It is designed as an assembly to print it all visibal surfaces optimal and to disamble it for cleaning. It fit two Pad holders no matter if the singel or…
In addition to the original BOM, you will need two compression springs, a few M4 screws and nuts, and M3 square nuts (optional).
A simple side panel for the trim wheel so that the part can be closed off and it is also stronger with the panel. It can be glued on. just make sure that it is pressed against the curved part for extra strength.
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
A quick and easy stencil to help create a quadrant divided Post-It Note.
This is a throttle lever inspired by the Airbus A320 throttle lever for the Saitek Pro Flight Throttle Quadrant. My design only uses one single slider for both engines since its only for fun. This lever is very light weight so it doesn't…
This converts a Logitech flight simulator quadrant from 3 separate control quadrants to a single triple throttle quadrant. Sized to allow for PLA shrinkage (assuming an initial scale factor of 102% is in your slicer) I haven't tried…
slim version of switch attachment for Logitech Throttle Quadrant
Adapts a NEMA 17 stepper motor shaft to what I call “Quadrant Drive”, which transfers torque in a way that is very fitting for 3D printed parts (strong, 50% of the “meat” of the material is used unlike many drive systems that mostly just…
Made a quick dust cover to avoid future cleaning of Saitek Pro throttle quadrant. Added a little hole for the appropriate “Remove Before Flight” tag. To ensure it doesn't fall off I added a couple velcro dots to the cover and the top of…
This is a remix in which the the cylinder at the base of the lever is offset more towards the potentiometer, the original was slightly in the wrong location. It now actually works. Some improvement could be made on the 5 curved grooves,…
This is a quadrant, a tool for measuring altitude angles. Sight along the right edge at a star, and the index arm indicates the angle. This is a two part model - quadrant body and index arm. The OpenSCAD source that generates the two…
This tray fits inside a Husky Small Parts Organizer Box (Home Depot brand) and provides four smaller quadrants inside. Prints best in either PLA or PETG. 20% infill
Part of the master project found here for a rotary laser engraver .
If you want to use the CH Throttle Quadrant (a popular flight simulator peripheral) with a thinner table top you probably end up putting random stuff between the clamps and the table to get a grip. This should work for tables down to 1/4…
With this model you can quickly fix Thrustmaster TCA Throttle Quadrant to table and by lifting remove it. Mount holds it steadily in place when adding or retarding throttle. In my case it needs to be removed to use handbrake in other…
Printed on Flashforge A5M using standard PLA. 0.2mm layer height 0.4mm nozzle Tree (auto) support for knob 5 wall loops (2 mm) 15% Cross Hatch infill density 5 bottom shell layers 5 top shell layer Default Flashforge Generic PLA settings…
Idea from srbarlow3 made it so you only need one ramp in the middle.
Slightly reworked model made by xA59rhR8FF . Added support for the FSM-GA module to add stability and rigidity to the whole model. Also changed the holes at the bottom of the rail to accept various screws (removed conical shape). I…
Easily mark your table quadrants with these tokens/markers. nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models…
Great, easy mod to make flying feel more real!
Usually the Honeycomb Bravo quadrant is placed to the right of the yoke. This model let's you mount the FlightSimBuilder GNS530/GNS430 at an angle to properly see the screen. I included 2 models for you to choose. The difference is how…
This can be printed rather roughly (printed mine in 0.28) as long as the screw holes are supported properly. You can decide which holes go through the table or used double sided tape to mount it. I used the 4 in the cornes, the inner 4…
The stock gear lever on the Bravo Throttle Quadrant is a bit flimsy to me. So I made an outer cover and a "rim" to fill the hole (you will need two of those). For printing it I've chosen TPU, all parts fit without glue.
Bracket for Playseat Challenge to mount Saitek throttle quadrant. Print in orientation provided. Uses M4 hardware Also included little flap/gear thingies to sick on the buttons with VHB tape. Print Settings Printer Brand: Prusa Printer:…
Converts between my Quadrant Drive and the ubiquitous 1/4" hex/allen (male). This allows you to use many common existing hand tools like ratcheting screwdrivers, drill chucks, etc, with Quadrant Drive. Instructions Just slice and print,…
Better index arm for useful astronomy tool. Requires 6 mm hole in quadrant body.
The levers that came with the Throttle Quadrant were a bit fiddy. So I made some covers that fit on the black original levers (see picture). As I mainly fly single or twin engine aircraft, this is perfect for me and gives me a lot more…
Basic screwdriver-type handle with a quadrant driver. Instructions [Note: I ended up printing it by flipping the model vertically and sinking it 3.5mm down into the bed. There was a tiny bit of sagging at the top end of the handle but it…
Print one each of the four quadrants - NW, NE, SW and SE - plus the mounting piece and four each of the short and tall bushings. You will need eight each of M4-.7 x 12 FH screws and M4-.7 thin profile nuts. After assembly tape the four…
4 section organizer for screws bolts or really anything youd like, i have added slots for magnets to go onto the bottom to catch whatever metal bits you thow in. The slots hold 1 ~20x5mm magnet each
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster TQS. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow sucks! So I…
Designed and built by the Vikram Space and Science Club (VSSC) . This custom flight simulator console features a functional dual-lever throttle and flaps system powered by precise Hall effect sensors. It also integrates three dedicated…
I painted the logo in 3d paint in like 2 mins so it looks horrible!!
I wanted a simple throttle grip and the Mixture knob from Dingo was a perfect basis
Can be printed using any material. Model is a bit small (not flush along sides) if you use ASA. I would recommend using ~105% size. Used for the underside of the flap toggle for the Bravo Throttle Quadrant
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
The arms on the Saitek / Logitech throttle quadrant are easy to break at the point the arm enters the main box. Replacement parts are unavailable, so this is an alternative. It doesn't replace the whole arm, but if you cut back the broken…
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster TQS. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow sucks! So I…
I wanted a simple throttle grip and the Mixture knob from Dingo was a perfect basis
Modern and stylish pencil holder in diffrent sizes with several compartments. Size: number of compartments x width of compartment in mm x total height in mm Printed in PLA with a layer height of 0.2 mm. No support needed. Ask if you need…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
Inspired by Daher TBM 930 throttle quadrant Video: https://www.tiktok.com/@diy_beyond_3d/video/7513349558777154818?is_from_webapp=1&sender_device=pc&web_id=7370664034733131297 Video:…
