Working A320 Flap Lever for TCA Quadrant – Flight Simulator – Thrustmaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pull-to-move Airbus-style flap lever with real detents for the Thrustmaster TCA Quadrant Add-On. Quick easy install.
- Ocena
- 5 / 5
- Polubienia
- 27
- Wydruki
- 1
- Wyświetlenia
- 1912
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Standard Digital File License
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels far more realistic and eliminates unintended movements.
Designed for an easy, reversible install:
• Only extra hardware: a small compression spring (specs below). The original screw is reused.
• Detent inserts attach with double-sided tape.
• No permanent modifications to the TCA module.
Compatibility
• Thrustmaster TCA Quadrant Add-On Airbus Edition (flaps module). (Official product page: Thrustmaster)
Bill of Materials (BOM)
• Compression spring:
- Length ~20 mm (shorten if needed)
- Inner Ø ≥ 8.1 mm (for frictionless action)
- Outer Ø ≤ 12 mm
• Double-sided tape for the detent inserts
• Just reuse the original TCA screw
Install (5 minutes)
1) Remove the original screw and lever.
2) Stick the grooved inserts (detents) with double-sided tape.
3) Slide the lower part onto the lever (screw cut-out facing forward).
4) Place the spring and push the upper part down to engage.
5) Gently press down and reinsert the screw (avoid cross-threading).Install (5 minutes)
1) Remove the original screw and lever.
2) Stick the grooved inserts (detents) with double-sided tape.
3) Slide the lower part onto the lever (screw cut-out facing forward).
4) Place the spring and push the upper part down to engage.
5) Gently press down and reinsert the screw (avoid cross-threading).
Printing notes
• Use any solid material (PLA, PETG, ABS, etc.).
• Two tolerance sets are provided:
- Normal/low tolerance for well-tuned printers
- High-tolerance variants if your fit is too tight
• Orient as provided; supports are typically not required.
Changelog
• 2022-06-19: Added high-tolerance variants; file set now 9 items.
Credits & thanks
• Designed by timonhug.
Disclaimer
• Fan-made mod. Thrustmaster/Airbus are trademarks of their respective owners. Use at your own risk.