Liczymy pasujące modele…
Soles plates for Cult boots. Size US 6-7, US 8-9, and 10-11. Use a strong filament like PLA Max/Pro/Plus, nylon, or Esun ePLA-ST. Due to inconsistency in Cult manufacturing, you will likely have to readjust some of the hardware holes in…
Four piece soles for the Razors Genesys boot. You'll need sole plate additional hardware to mount these.
Two razor holder models for Gilette Fusion 4 and Venus Intuition. This is designed to be hooked on shower walls with a maximum thickness of 6 mm. Easy to print, I recommend a raft layer though.
Sealed box for disposal of shaving blades / other sharps
Other guards for safety razors are usually designed to slip on from the side. This sometimes results in the guard slipping off while in your bag. The sliding action also results in a cutting risk when slipping. My design aims to eliminate…
I took the stand idea from Rex's own razor stand and made my own twist to it. I have added an container for blades. I also added water drains at the bottom of the razor stand to minimize the water stain. This is also a low profile stand…
A DE razors rack that accept 4 razor and a shaving brush. Made in two pieces for print quality and avoid supports. Both pieces print on their back and must be glued together. There is protrusions that create a perfect aligment. The rack…
Two razor holder models for Gilette Fusion 4 and Venus Intuition. This is designed to be hooked on shower walls with a maximum thickness of 6 mm. Easy to print, I recommend a raft layer though.
Description I made this adapter to hold three razors using the IKEA Tisken suction cup mount. I needed a simple way to keep them upright and out of the way — no more balancing them on the edge of the shelf or leaving them in a puddle. It…
Gridfinity bin Harry's Razor bottles. Printed on a Bambu Labs X1C using Bambu PLA Matte Terracotta and the standard Bambu 0.20 Standard print profile.
Handle for 3 blade safety razors with 20mm width print upside down with supports ≤ 0.15mm layer height
N.B. Razors shown for demonstration Only I've grown a modest collection of razors and wanted a way to show/display the ones that I'm not actively using. Most commercially available options held to few razors, were too costly, or both.…
i designed a simple and easy to print holder for trapezoidal blades - for example to clean stoves or windows blade dimensions: length: 61mm width: 18,7mm height: 0,65mm The handle is 10 cm long Print with supports (only on the printbed!)…
This is one of my first designs, so it may need work! Brush Holes 3 of the brush holes are 26mm, The leftmost one is 33.5mm for a bigger brush. The rightmost brush hole is 25mm, They are designed to hold and grip 30mm 26mm and 24mm…
A shampoo holder with a drawer initially intended for razors. Dimensions: 160x60x80 mm Cutouts for shampoo bottle: 70x10 mm Settings: Supports: Tree support Resolution: 0.2mm Infill: 15% PLA, PETG Filament brand: any Filament color: any
Clean up your setup with this perfectly-fitted Razor Holder Wall Mount, Suction Cup, Holds Multiple Razors, Shower Safe Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Clean up your setup with this perfectly-fitted Razor Holder Wall Mount, Suction Cup, Holds Multiple Razors, Shower Safe Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Sealed box for disposal of shaving blades / other sharps
Update 6/23/2026 Original lids are a bit on the loose side. I added two lids that have "snug" in name description. They fit tighter and can be made to move smoother by a little paste wax or very light, fine sanding. This is a travel case…
This is a stand for two safety razors i created when I started with 3D printing and use it since then. Dies ist ein Ständer für zwei Rasierhobel, den ich in der Zeit als ich mit 3D-Druck anfing, konstruierte und seither benutze. English:…
This holder, together with one of the very cheap suction cups with screw/nut interface, makes a very nice every days storing fixture for your razor. These are the suction cups that I used, but there are various types around with very…
After seeing multiple options for opening my nespresso vertuo pods online that required razor blades I decided to design one that didn't need them as I was a bit worried about safety. My Printing Settings that worked fine (my default…
Prints without supports. Lay it on it's back for easy printing
A simple and small stand for safety razors with handle diameter 12mm or larger. Remixed for Weishi safety razor.
This is a wall mount for a safety razor. It is custom tailored to fit weishi branded safety razors. Two razors with different patterns on the handle were tried, both fit. It is a bit rough around the edges - as it really lacks beauty, and…
I made this razor shelf organizer to enter the Bathroom Shelves contest. The default holder settings are for a Merkur 34C razor and a pack of Feather blades.
Easy print, no supports, default 0.2 settings are dandy. Print with the opening facing down. Quick print, uses little material while being sturdy enough to store old blades. Internal shape keeps the blades from twisting around and getting…
This is a simple snap-on design which doesn't take up extra space in a bag. It can be used with a blade installed, and it doesn't trap moisture. It needs to be accurately sized to fit your particular razor head. I originally designed this…
This organizer stand lets you hold up to 4 safety razors, a shaving brush, a shaving bowl, and 4 dice to indicate how many shaves each razor blade has been used for. If you're like me, I like to experiment with different razors and wanted…
