Liczymy pasujące modele…
A simple print that fits into the space above the Mamiya RB67's ground glass without interfering with any of its viewfinders to indicate framing for 35mm film through the RB/RZ67.
Non-destructive and 100% reversible mod for original Mamiya RB67 PRO-S 6x7 film back to 35mm panoramic frames 24x68mm. If this was useful consider a donation of any amount.…
I had been looking for the original testplate for ages, and decided to give it a go. I designed it to be used with exisiting focus screen. Watch the video on how to use it below :-)
rear lens cap
ALPA RB67 Viewfinder Adapter takes 78x78mm focus screen
This is a very crude and simple box, lid and adapter to fit a Mamiya RB67 while I was waiting for a good price on an OEM one. Nothing fancy but it worked.
Replacement back cap for a Mamiya Lens. Snug fit (tested using 127mm f/3.8 Sekor Lens) Printed in PETG for flexibility
21 May 2026 Update Fixed the clearances in the back mount — Pro SD backs now attach without any issues Removed the protruding “tooth” at the bottom of the mount that prevented early RB67 Pro backs from fitting properly Added a body…
As I had no lid for the back opening of my RB67 I remixed DavidB75's focus adapter to a simple cover. I also added a second version that uses less material, but I have not tested that one yet.
THIS THING IS PROVIDED "AS IS"! USE IT AT YOUR OWN RISK!!! I'm not responsible if your dear camera hits the ground! This is a two-piece adapter. Main body can easily withstand stretching load. It takes bending but may degrade if you bend…
THIS MODEL REQUIRES THE JOLLYLOOK SQUARE DEV UNIT TO WORK This custom back allows for shooting Instax square film on the Mamiya RB67 (Pro-S tested only). The included dark slide allows the back to be changed out mid-cartridge. Note: I…
Adapts RB mount lens to Horseman board. slits on the side allow for the user to cock the lens using the lever model. I find it easier to mount the lever to the pin that rests at the top so that you can cock the lens by simply tilting the…
DOESN'T FIT THE Pro SD BACKS As the summary says. Printed mine upright in PETG with no supports on the insides. Snaps into place. Gratuitous chamfering because it's chamfers and also because my battery holder for my digital camera…
Use PETG to fill the print layer with 100% height 0.16mm
The Mamiya RB67 camera has an accessory chimney viewfinder that is pretty awesome! Problem is, I can't find any evidence that the viewfinder eyepiece glass came with any sort of cap for protection from dust, debris, or other damage, so I…
This is the focus knob for the Mamiya RB67 medium format film camera. It is tapered identical to the original part.
After doing some research on taking exposures longer than 1 second with the Mamiya RB67, I was presented with two choices. The first purchasing the dual threaded cable release on Ebay for ~80$ USD (at the time of writing this) or manually…
WARNING! These masks are not directly compatible with the 120 backs, the screw holes are in slightly different locations
A viewfinder mask for the Mamiya RB67 focusing screen; helps with composition when adapting 35mm(135 format film) to the 6x7 film back of the RB67. It masks the finder for a 1:2 panoramic aspect ratio and XPan crop. Print & Fitment…
Focus knob for the Mamiya RB67 medium format film camera. It has a square profile unlike the tapered original part.
The purpose of this project was to create a wireless trigger for the Mamiya RB67. I accomplished this by designing a 3D printed bracket for the servo motor and a hotshoe mount for the Arduino board and RF Receiver. Parts Manfrotto…
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
Battery holder for RB67 motor back
It takes some dissasembly of the lens in order to fit this lever arm, i suggest you only do this if you know what you are doing! :-)
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
THIS MODEL REQUIRES THE JOLLYLOOK SQUARE DEV UNIT TO WORK This custom back allows for shooting Instax square film on the Mamiya RB67 (Pro-S tested only). The included dark slide allows the back to be changed out mid-cartridge. Note: I…
Still a W.I.P. This adapter helps you mount your Bronica SQ-A prism finder onto your Mamiya RB67. You will need to dissasemble your RB67 chimney finder to get the base + two front screws. Once you have those, and have printed this, you…
I started with @BerndPfeifer_2033527 's excellent remix, however, the RB67 has an interlock that doesn't allow the back catches to be disengaged unless the dark slide is installed (which the cover obviously doesn't have). This cover just…
Battery Holder for Mamiya RB67 Motor Back you might also need some 6mm metal ribbon as contact pads
This allows you to keep arca plate on your camera all the time. For now it's designed specifically to fit Smallrig 5365 plate. I'm planning to make it more universal, because i don't like this plate that much, so more updates soon. For…
This is a custom cold shoe adapter designed to fit the left-side mount of the Mamiya RB67 , utilizing the same screw holes typically used for the camera strap lugs. The adapter allows you to attach light accessories, such as a light…
remix to work with generic Arca plates in 2 positions I printed on a 45 with minimal support in PETG CF
This aid makes it clear where the boundaries are when shooting Instax Square on RB67. Printed in Polycarbonate for strength and durability. Layer height: first layer 0.2mm, succeeding layers 0.05mm Temp: 225 (Polymaker PC-MAX) Bed: 100…
This is a simple adapter to use a universal slotted left hand grip with the Mamiya RB67 camera to limit rotating of the camera and help affix it to the grip if using a non OEM grip.
The tiny red lens mounting mark on my Mamiya RB67 got lost so I built a new one. Should also fit on the SD and SD pro, but I am not sure about that.
I found a mamiya rb67 finder that didn't have the logo part that retains the finder to the camera, so I 3d printed it. It uses 2 M2 screws (I think the ones I used were M2x3) and they are screwed through the retaining bar, the finder, and…
![[WIP] Mamiya RB67 Arca plate stabilizer](https://media.printables.com/media/prints/7623e5a3-dc82-44a6-a7f8-1046c294ed60/images/11036804_698881a4-56bd-4577-9b08-a4884cdb0889_934041ff-b619-40c3-a2d7-47600e1ae7ac/img_2907.jpg)
