P
PrintablesMiadele
24 mm socket for removing RV water heater drain plug
This was design to fit the very tight space for removing the water heater drain plug on my motorhome.
- Pobrania
- 90
- Polubienia
- 12
- Ocena
- 0
Wyniki wyszukiwania: removing
Liczymy pasujące modele…
P
PrintablesRealPrint
Material for lowering or removing the top step on a pool ladder / Material zum Herabsetzen bzw. Entfernen der obersten Stufe an einer Poolleiter
You still need 2 angle profiles 200 mm x 20 mm x 1 mm made of stainless steel. The thread in the cap may need to be recut. New may 2026: base for the top step Man braucht noch 2 Winkelprofile 200 mm x 20 mm x 1 mm aus Edelstahl. Das…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBraheem24
Bambu Labs Front loading desiccant boxes for AMS with Hygrometer fits without removing filament.
Front loading desiccant boxes for AMS. These slide in and out without having to remove the filament to change out the desiccant and I also added a hole for an hygrometer. Hygrometer I used is 44mm in diameter…
- Pobrania
- 621
- Polubienia
- 71
- Ocena
- 4,33
P
PrintablesMike
Seed separator (removing husks, shells, debris)
Revolutionize Your Seed Cleaning Process Tired of spending hours tediously cleaning your harvested seeds? This 3D printable seed separator offers a quick and easy solution that saves time and money using ordinary house hold equipment - a…
- Pobrania
- 513
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMikhail Babarinow
Boot Jack - Device for Removing Shoes
back hurt? cant bend over? try the new shoe aid remover. really if you dont like stepping on the back of your shoe to get it off and dont like untying them this might be the solution for you. The dimensions of the model are too large to…
- Pobrania
- 417
- Polubienia
- 87
- Ocena
- 4,75
P
Printablesswissmineral
Gopro SD Card removing plier
Micro SD Card Remover. Designed for the Gopro Hero 8, can also be used for other devices. The Gopro has such a thin slot for the Micro SD card that I can't remove it with my sausage fingers. Therefore, I have modified my potato chip…
- Pobrania
- 134
- Polubienia
- 19
- Ocena
- 5
P
PrintablesPotato Stardust
Key for removing NTW RJ45 Port blockers
Lost most of the supplied keys, made this design in order to be able to make more when needed. Print at 0.2 (or better) layer height, slowly since there are some very small indents on the sides that are needed to unlock the blocker.
- Pobrania
- 101
- Polubienia
- 10
- Ocena
- 4
P
PrintablesIvosus
Special tool for removing part of the swimming pool nozzle
PETG infill: 15 % layers: 0.2 mm perimeters: 3 recommendation: print with the handle up
- Pobrania
- 92
- Polubienia
- 19
- Ocena
- 5
P
Printablesspoonie woonie
Deutsch pin removing tools 16 20
Deutsch pin removing tools for size 16 and 20 pins. Print Settings. Strong Filament PA ASA ABS, PETG 0.12mm or fine layer height Seam position Random Print laying down, Stronger than printing up right, Supports needed.
- Pobrania
- 72
- Polubienia
- 3
- Ocena
- 0
P
PrintablesThePr0rok
LPG cap removing tool
Simple tool I designed to unscrew my LPG cap easier when refilling car.
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGlenn Brockett
Tool for removing multiboard snap in inserts
Small handle for removing press fit inserts from a multiboard panel. Just thread it in and push up. It prints as downloaded without supports in under an hour (33 minutes on my Voron.)
- Pobrania
- 52
- Polubienia
- 12
- Ocena
- 5
P
Printablespermanentbrownmark
Tool for Removing/Installing Ford F150 Blend Door Actuator (SCAD)
This is a tool for removing/installing center blend door actuator in 2009-2014 Ford F150 (and others). In this application, the rear screw can't be accessed from the center console, due to a frame member which is directly above the…
- Pobrania
- 51
- Polubienia
- 18
- Ocena
- 0
P
PrintablesScrappeyDP
Rotary Potentiometer DJ Knob Puller Wedge for Removing and Replacing on Mixers, Controllers, Interfaces, Consoles, Amplifiers, Inboard and Outboard gear
This is a very basic wedge design with a 6.5mm gap to allow you to get under the knob and push the wedge forward to move the knob cap upward so it can be pulled off more easily for those who are not strong enough to manually pull the cap…
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 0
P
PrintablesOnkel
36mm tool for removing the thermostat from a Grohe rainshower system
36mm tool for removing the thermostat from a Grohe rainshower system. The same process as in this video: However the video above uses the 34mm tool instead. The 36mm tool can be difficult to obtain so here is a version that can be printed…
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSUSLOV ALEXANDR
Keychain for removing ticks
Looked at the ticks dimensions on the wiki: The size of an adult tick ranges from 2.5 to 5.0 mm in a hungry state. A well-fed tick can reach 7-10 mm, some species are larger - 11 mm. I made my own version.
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 5
P
PrintablesLean 3D
Spade for removing ashes
Light and small spade for removing ashes from the wood stove
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAleksander Pietrzak
Tool for Removing Joystick – Xbox Elite Series 2
Tool for removing joysticks from the Xbox Elite Series 2 controller . It makes maintenance and replacement quick and safe without damaging the controller
- Pobrania
- 27
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMKLV
Tool for Removing 24mm Fork Caps
In the motorcycle I’m restoring, I need to remove 24mm shock absorber caps. The shock absorber looks as if it has never been disassembled, so after 27 years, a lot of force is required to unscrew them. At the same time, I wanted to ensure…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMiguelB.
Holder for hook tools for removing seals and gaskets / Soporte ganchos para quitar retenes y juntas
Soporte para tener organizados tus ganchos. Holder to keep your hooks organized.
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesZerubota
Removing Tool für DT Swiss P1800 – Einfaches Entfernen von Naben
Das Removing Tool für DT Swiss P1800 ist speziell entwickelt, um das Entfernen der Nabe bei DT Swiss P1800 Laufrädern zu erleichtern. Bei Wartungs- oder Reparaturarbeiten ist es oft notwendig, die Nabe zu demontieren, um an die Speichen…
- Pobrania
- 18
- Polubienia
- 7
- Ocena
- 0
P
Printablestultas
Do it without removing! Faucet Mirror Badge / Faucet Ring
Do it without removing the faucet! This is the ring that covers the faucet's connection point to the wall. You can easily install it without removing your faucet. Standard settings. Water-resistant filament would be better. PLA also works.
- Pobrania
- 17
- Polubienia
- 4
- Ocena
- 0
P
PrintablesIlyas Sofian
eSpring tube removing tool
This tool is used to remove the tubes from eSpring water filter system when servicing. It's supposed to be supplied by the manufacturer when you buy spare parts but I lost it so I made it myself.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesS.Eisenhut
Cover plate - for covering belt winders without removing the belt
Cover plate - for covering belt winders without removing the belt Replacement for the one-piece old-school covers without removing the belt Dimensions from hole to hole approx. 100mm, printable without supports, with a smooth or textured…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPromete01
fan arm for removing leftovers on neje bl 1500
An arm that uses the original fan and relocates it near the laser for removing burned leftovers. how to: 1. unscrew the fan 2.unscrew the back plate and detach the fan wire 3. put super glue on the borders of the fan CAUTION : you have to…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYaroslav
A tool for removing apples from a tree
a tool for removing apples from a tree
- Pobrania
- 6
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLukyzzz
Triumph 22mm Bar End Insert - Removing Tool
Tool for removing the Bar End Insert from Triumph handlebars (28.6 / 22 mm). You only need an M6 bolt (minimum 40 mm long) and an M6 flange nut. If you print the tool from a more durable material, a washer will not be necessary. I printed…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesk
3/8 Allen Driver for Removing Vise Jaw Bolts
A 3/8" Allen or internal hex finger driver for removing the jaw retaining bolts from Kurt style machining vises. MK2 version has a 1/4" square drive hole to add an extension to remove bolts from extra deep soft jaws. I printed mine out of…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKoos
Pick tool for removing clear dental aligners/braces.
This is a remixe of https://www.printables.com/model/1103052-pick-tool-for-dental-aligners. I made an eye for better grip. Printed with ASA, layer 0.2 and 60% infill.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Triumph 22mm Bar End Insert - Removing Tool
Tool for removing the Bar End Insert from Triumph handlebars (28.6 / 22 mm). You only need an M6 bolt (minimum 40 mm long) and an M6 flange nut. If you print the tool from a more durable material, a washer will not be necessary. I printed…
P
Printables
screw grip. tool for removing supports
I rotate and press the screw on the supports. When it gets some grip , I move around . When I hear a crack, I pull.
P
Printables
Pool Deck Plug removing tool
This tool helps to get a little more torque on the plug in the pool deck to remove it. I found it also works on the bottom of my salt shaker with a similar finger grip! Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No…
P
Printables
device for removing high-pressure collet clamps
it was made for the machine to work, the native part broke and I made a new one based on it.
P
Printables
Safety knife for removing tape
I've developed a safety knife for removing duct tape and electrical tape from surfaces. This knife can be attached to a mop extension. I've attached a link to a replacement blade:…
P
Printables
Tool for installing and removing third-party AD5M hotend connectors.
If you are using a third party heating element on your AD5M that has a separate 4-pin connector on the wire, this tool will make installing and removing that connector easier. Print with PETG filament using a 0.4mm nozzle, 0.2mm layer…
P
Printables
Wrench tool for removing Vitamix blades
EDIT: Please make sure that this is the wrench that fits you blender models. Other users posted variations that fit newer Vitamix blenders. This thing is a tool I used to replace blades on our Vitamix blender. It's a remix of another…
P
Printables
Seiko H357 Glass Removing Press Tool
Model to fit some Seiko H357 models, it won't fit all as they reused the movement on a number of styles. Please note this is untested as I haven't used it yet. I printed at 100% infill.
P
Printables
Tap Filter Removing Tool
Now available in multiple versions with different offset from the nomina dimension.
P
Printables
Bosch Advanced Vac 20 vacuum cleaner nozzle for removing dirt from small parts
The nozzle on the Bosch Advanced Vac 20 vacuum cleaner for removing dirt from storage for small parts. When it is necessary to remove dirt from the storage areas of small parts such as screws and nuts, you can use this nozzle. It allows…
P
Printables
Burkert 8691 cap removing tool
English version below J'ai créé mon propre outil de démontage de capot transparent de vanne Burkert 8691. Sa référence officielle est 674077 Si vous avez besoin de plus d'informations ou quoi que ce soit, n'hésitez pas a me contacter…