1 / 3
3/8 Allen Driver for Removing Vise Jaw Bolts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a 3/8" Allen or Internal Hex Drive for removing vise jaw bolts on Kurt style machining vises
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A 3/8" Allen or internal hex finger driver for removing the jaw retaining bolts from Kurt style machining vises. MK2 version has a 1/4" square drive hole to add an extension to remove bolts from extra deep soft jaws. I printed mine out of PETG at 100% fill but that is probably unnecessary
I don't recommend trying to use it as a 3/8 driver on a quater inch ratchet but, you do you.