Liczymy pasujące modele…
Original rack gets wobbly and needs a little extra support. Mostly made to play with Blender CAD Sketcher plugin. More serious support would need clamps…maybe a future project.…
This is a stiffening bracket for the IKEA RIGGA clothing rack. The joint where the vertical posts meet the horizontal cross bar is not the most rigid. Over time, my rack has developed a lean to one side. I decided to create a stiffener…
When putting the IKEA RIGGA clothes rack outside for drying the clothes the wind can easily push the whole rack around due to the attached wheels that don't have any break functionality. As such I designed those simple wheel blocks to…
Converts 3/4" pipe to 5mm hose adapter for micro drip systems I am using a fountain pump to water my plants with 4.6mm micro drip hose. Print straight up without support at 0.2mm layer height
Replacement for cracked Ikea RIGGA cloth hanger socket with imprinted M6 nut (wrench 10 mm). There are two versions one for low / thin design nut (DIN 439, height 3,2 mm) and second one for standard design nut (DIN 934, height 5,0 mm).…
This just a my replacement part i made uses a bolt and a 3D printed part part needed M6 bolt, 40mm minimum length https://www.ikea.com/sa/ar/assembly_instructions/rigga-clothes-rack-white__AA-712786-6-2.pdf
These end caps are easy to print and install. The first one CR - Connector , with its lip slightly wider than the original, allows for holding more hangers at the ends. The second one CR - End Cap allows for connecting 2x RIGGA together…
The IKEA RIGGAD lamp with Qi wireless charging is great, but for me it had one fatal flaw. Fumbling around in the dark it's a pain to find the charging spot. This Thing is a quick solution for that problem. Slide it on to the lamp and you…
I was sorting through files on an old hard drive and found stiffening bracket model that I made in 2016 for IKEA RIGGA. you need to print one part twice Installation on hangers is quite simple, just fix it with ties In my photos the…
Printed with transparent PLA no supports 0.2 resolution, but 0.3 should also work
Hello! This is a piece to join Ikea clothes racks, Rigga model. It's easy to print and comes under pressure, so you don't need anything else.
Zapatero apilable para el perchero rigga! https://www.ikea.com/es/es/p/rigga-burro-ropa-blanco-50231630/
This model matches the female buckle of the Duraflex Trigga in 10 mm width. Fusion file is included if you need to make a different width. Print horizontally with supports. The radius connecting the pointy part to the base has been…
This model is a dreidel that can be rigged if you'd like to. The model can be assembled just by pushing the four blocks into the outside of the dreidel body. The proper order for the blocks is Nun, Gimel, Hey, then Shin. I recommend that…
This holder allows you to mount a generic shelf onto the IKEA RIGGA clothes rack. It’s not intended for storing heavy items, as it may wobble, but it works great for keeping accessories like scarves, hats, caps, etc. The holder can be…
This just a my replacement part i made uses a bolt and a 3D printed part part needed M6 bolt, 40mm minimum length https://www.ikea.com/sa/ar/assembly_instructions/rigga-clothes-rack-white__AA-712786-6-2.pdf
Print in white to match the original. I used eSUN PLA+ White and it's hard to tell which one is the original and which is the replacement. Printed in DRAFT profile, 0.3mm layer height. Use 3 perimeters to avoid infill in the wall - makes…
I made this Ikea Rigga brace to fix it up after it started to lean heavily with all of the clothes hanging from it. There are some solutions already on printables but since this is visible in the bedroom I wanted it to be a bit more…
This model is inspired by shower head mounts and provides a way to attach additional accessories to an IKEA Rigga (or any other rod with a diameter of approx. 25.5mm). It is fully printable and does not require additional hardware. I…
We use IKEA RIGGA racks to dry laundry on inside/outside the house. When outside, the wind often causes all the clothes hangers to slide down one end of the rack, causing the clothes to dry slowly as they are all bunched together. These…
Use threaded inserts to then screw the joint to the lamp. You might want to use a vice to connect the joint. You will have to cut the wires and solder them back together to replace the joint. Print with 100% infill.
Printing parameters: Material: PETG Resolution: 0.2 mm Supports: yes Assembly: 12 screws M4 x 10 2 screws M4 x 16 14 nuts M4
