IKEA RIGGA screw on mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This model is inspired by shower head mounts and provides a way to attach additional accessories to an IKEA Rigga (or any other rod with a diameter of approx. 25.5mm).
It is fully printable and does not require additional hardware. I strongly recommend adding a small strip of double sided tape to the parts touching the rod to increase friction. This is because the clamping force is not very high and the rod rather slippery.
Due to the modular design you can design your own attachments for your Rigga.
Print settings
The settings below assume a nozzle size of 0.4mm. There is no need for supports if you use the Ikea_Rigga_Full_Set.stl file. If you choose to print single parts, please make sure to print them in the correct orientation.
Layer Height | 0.2mm |
Perimeters | at least 3 (more perimeters add strength) |
Top/Bottom Layers | 3 |
Infill | 15% |
Extensions
You want to design your own attachments? Have at it
The base plate of the hook attachment is a cylinder with a diameter of 37.5mm and a height of 2mm.
The hole in the lock is 30mm in diameter. Make sure your attachments fit through there somehow.
I'm happy to link your design here if you let me know about it. Maybe others find it useful as well.