Liczymy pasujące modele…
Es gibt eine vollständig überarbeitete neue Version: Gewürzregal als Rondel für Gewürzgläser von Ankerkraut. Es passen 6 Gläser auf jede Ebene, die Anzahl der Etagen kann beliebig zwischen 1 und 4 gewählt werden. Natürlich lassen sich…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu
For Brondell Ecoseat Swash S101/S102. May fit other models also. ABS is probably best given the high moisture environment. No issue using basic PLA though. Infill % shouldn't really matter so long as there is sufficient wall thickness. No…
Wydruk około 22,69 €–27,73 € nettoWstępna wycena jednego wariantu
This is a replacement clip for the power cable and bidet hose on a Brondell Swash S1400 . It may also work on the S1200 model, but I haven't tested that. You can see in the second photo the original clip in white (it's broken), and the…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Recently as the result of a freak accident, the knob to my Brondell Swash Ecoseat broke. In a rush, I quickly printed off the first and only knob I found and used that temporarily. Alas, I found myself dissatisfied with the feel of the…
Countersunk Washer - Conical Washer - Metric -Rondella Sottovite Conica Available sizes: M3 - M4 - M5 - M6 - M8 - M10 - M12 CSW3.3x12mm CSW4.3x16mm CSW5.3x22mm CSW6.3x24mm CSW6.5x22mm CSW8.5x25mm CSW10.5x30mm CSW12.5x40mm CSW4.3x14mm…
Zum drucken habe ich 2mm Layerhöhe mit 15% Infill genommen die Schraube habe ich mit 100% Infill gedruckt. Die Datei ist als 3MF hochgeladen. wünsche euch viel Spaß beim drucken. Ist sehr gut geworden
It's a replacement knob. You can optionally remove and use the metal knob-ring from the old knob (see pictures). Should fit nicely with a well calibrated printer. If you find it's a little loose (or tight), adjust your print extrusion…
Hello (v3 uploaded now with an improved connection for the back plate) After I made a larp safe parrying dagger last year I challenged myself to design a fully safe stabbing dagger for conquest of mythodea this year. The result is both…
Emporte pièce forme Hirondelle de 15cm de long pour patte a gâteau, Fimo, ect
Note d'impression Afin de respecter au mieux les épaisseurs, il faut imprimer les rondelles M2.5, M3, M6 et M8 en 0.10mm DETAIL. Les autres rondelles en 0.20mm.
Rondella adattabile fill 100% PLA+ 0,40mm
Note de montage La poignée utilise un écrou M8. Il faut forcer lors de l'insertion de l'écrou à cause des 3 ergots à l'intérieur. C'est normal, ceux-ci permettent de garde ensuite l'écrou en place. Note d'impression Nécessite des supports…
This is a trainer for a Rondel dagger for HEMA use. Usually these are wood turned on a lathe, and I copied a wooden one for the design. It's quite large, fits on an XL if you turn it diagonally or you can cut it up and glue it back…
Fork Spring Spacer Washer 35.5/26mm th10mm Honda Transalp 600/650 Rondella Distanziale Molla Forcelle 35.5_26 sp10mm Transalp Filaments recommended: Nylon PA12 ASA PPS-CF PPA-CF PA6-CF PAHT-CF PA6-GF or filaments with a excellent…
Bestecker Organizer …zum Trocknen nach Geschirrspülen … … zur Organisation auf dem Tisch , Buffet, Camping etc.
Entretoise de butée à réaliser en TPU.
Swivel pad-washer for screw clamp - Rondella snodo strettoio a vite diam. 30mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hobby
This is a prop model of a rondel dagger. These were a typical sidearm on the medieval battlefield, to the point that they became a common civilian accessory, as well, often worn just stuck through the belt behind a kidney-shaped pouch.…
Overview While cutting a slice of lemon for me tea, I realized that the remaining part of the lemon finishes in the fridge, in a plate, small but always to large, that sometimes disappears at the bottom of the fridge. I decided to print a…
Ecrou rondelle pour usage sur vis fileté M4 ,M5 ,M6 ,M8 ,M10 et M12
A rondel dagger was used by a variety of people from merchants to knights. It was worn at the waist and could be used as a utility tool, or worn into battle or in a jousting tournament as a side arm. The blade was made of metal mostly…
Someone I know had carpal tunnel surgery on both hands at the same time. This bidet in combination with the handle I designed allowed for easier use during these personal situations. The handle allows for use in one of 2 modes, either…
Captive C washer / Hook - Rondella a C prigioniera / Gancio Ø4/6mm Centre to centre distance 15mm Ø5/6mm Centre to centre distance 18mm Ø6/6mm Centre to centre distance 20mm Resize/Scale to adjust dimensions If you download/enjoyed this…
Ce modèle vous permet de produire des rondelle de straps de la marque F-One. N'oubliez pas d'ajouter une rondelle inox de 6.4 x 18 x 1.6. Coupez là à la bonne dimension.
Clamping Cam - Captive C washers DIN 6371 - Rondelle a perno con vite testa piana 38x29x9.8mm M6x10mm 61x45x11.8mm M8x12mm Resize/Scale to adjust dimension If you download/enjoyed this file, I always appreciate a like - Thx
Rondella che in congiunzione ai connettori del sistema Stemfie permette l'unione di pannelli leggeri come ad esempio cartoncini. Il foro ovviamente rispetta la misura dei fori del sistema Stemfie. --- Washer which, in conjunction with the…
Permet de maintenir un écart de 15 mm entre le mur et la plaque HoneyComb. Par exemple si votre mur contient des équerres ou câbles empêchant la fixation de la plaque honeycomb directement sur le mur.
Designed a new handle for the Brondell for easier use.
Impostazioni di stampa Marca della stampante : Orso volante Stampante : Fantasma 6 Zattere : NO Supporta : NO Risoluzione : 0,1 Riempimento : 100% Marca del filamento : Non importa Colore del filamento : Non importa Materiale del…
📝 Description This model is a swallow nest support designed to be 3D‑printed and mounted under a wooden beam. The curved U‑shape provides a stable base for a natural or artificial nest, while the two side extensions include mounting holes…
Boule décorative en 2D représentant une hirondelle à accrocher en temps qu’étiquette, sur un arbre, etc…
Meine Gläser sind bei der Originalen Version immer raus gefallen, also habe ich das Rondel neu gestaltet. My glasses always fell out of the original version, so I redesigned the rondel.
Die Schraube welche benötigt wird um Fronten bei älteren Eckschränken einzustellen. gedruckt mit 50% Füllung, 0,16 und 3 Wandlinien.
It's a rondel dagger, or at least my attempt at one.
Il arrive que lorsque l'ont veuille fixer un robinet extérieur sur un mur ou un poteau et que l'on souhaite y visser l'arrivée, celle ci frotte contre le mur. Ou pire, que nous ne puissions pas le visser car trop proche du mur. J'ai…
Rondel sloužící k pohodlnějšímu hraní a přehlednějšímu rozmístění dílků v nabídce.
This is a 30cm rondel dagger, should be about same size as the Cold Steel one. I also shared the rondel as STL, if you don't want to fiddle with silicone... That wouldn't be safe, of course. You print 2 of each mold pieces, assemble the…
Farb Rondell für 12ml Tuben 0,2mm Support für das Rondell notwendig.
An addon for the coldsteel rondel dagger [link] to transform it into a parry dagger, also called gauche or Parierdolch. There are two versions of tolerance, the one without tolerance marking is ment for TPU, the tolerance marked model is…
An addon for the coldsteel rondel dagger [link] to transform it into a parry dagger, also called gauche or Parierdolch. There are two versions of tolerance, the one without tolerance marking is ment for TPU, the tolerance marked model is…
This is a replacement knob for the Brondell ecowash bidet. The one that came from the factory broke on a part of the housing that was structural and was not repairable. This knob is a direct replacement fit. Simply print and swap. I…
More information : https://arduiblog.com/2019/09/16/inventors-kit-pour-arduino/
stredová krytka ráfku rondell r17
I designed this spice rack to be fully expandable—stack as many layers as you want. Go wild. The sky is literally the limit. I didn’t design a lazy Susan base for this on purpose. Plenty of great ones already exist, and they’re better…
I didn't like any of the options to wall mount the remote control for my Brondell Swash 1400 bidet seat's remote control. I considered designing a shelf, but decided my best option would be just to hang it. To facilitate hanging it, I…
Rondella con inserto per tubo per fissaggio di chimes della batteria
Cette pièce est un composant de montage sur mesure , conçu pour assurer le maintien mécanique des nappes de protection à excroissances (type Delta-MS) sur les parois enterrées (béton, maçonnerie, etc.). 1. Conception Géométrique Profil…
I was looking at bracelet that I made out of glass beads and thought I need to make one that is not as breakable. I realized that this is not just jewelry, it is also a good sensory tool.
Watchmaker screwdriver rondell with ball bearing - 16 slots 5mm and 8 slots 3mm Screwdriverholder for nice cheap chinese watchmaker screwdriver. The rondell is mounted on 608 ball bearing.
These 3D files feature detailed Star Wars clan rondels inspired by the legendary Mythosaur and the Mudhorn signet from The Mandalorian . Designed for cosplay, display, armor customization, or wall art, the models capture the iconic…
I had a hard time reaching these nuts to put on the bidet seat securely and this wrench gives the extra reach needed. Not only does it give more reach and torque with just hand power, but it also can attach to a 1/4" driver. Not really…
Rondelle TPU pour serre joint Fichier F3d joint pour vos personnalisations Type de filament FLEX Filament utilisé 1,6 g / 0,56 m / 1,35 cm³ Température du plateau 50 °C Température de la buse 235 °C Diamètre de la buse 0,25 mm Hauteur de…
This is the second version in a series of Collapsing Rondel Daggers. The pommel screws on so the blades can be printed separately and inserted or replaced. This is the multi-part version. The parts are printed separately and assembled…
📝 Description This model is a swallow nest support designed to be 3D‑printed and mounted under a wooden beam. The curved U‑shape provides a stable base for a natural or artificial nest, while the two side extensions include mounting holes…
Cette pièce est un composant de montage sur mesure , conçu pour assurer le maintien mécanique des nappes de protection à excroissances (type Delta-MS) sur les parois enterrées (béton, maçonnerie, etc.). 1. Conception Géométrique Profil…
I was looking at bracelet that I made out of glass beads and thought I need to make one that is not as breakable. I realized that this is not just jewelry, it is also a good sensory tool.
This is a trainer for a Rondel dagger for HEMA use. Usually these are wood turned on a lathe, and I copied a wooden one for the design. It's quite large, fits on an XL if you turn it diagonally or you can cut it up and glue it back…
Clamping Cam - Captive C washers DIN 6371 - Rondelle a perno con vite testa piana 38x29x9.8mm M6x10mm 61x45x11.8mm M8x12mm Resize/Scale to adjust dimension If you download/enjoyed this file, I always appreciate a like - Thx
This is the first version in a series of Collapsing Rondel Daggers. The pommel screws on so the blades can be printed separately and inserted or replaced. Supports are not required, for best results use a .4mm nozzle. You can print the…
This is the second version in a series of Collapsing Rondel Daggers. The pommel screws on so the blades can be printed separately and inserted or replaced. This is the multi-color version which requires a MMU, AMS, IDEX, or Toolchanger.…
This is the second version in a series of Collapsing Rondel Daggers. The pommel screws on so the blades can be printed separately and inserted or replaced. This is the multi-part version. The parts are printed separately and assembled…
