546 modeli
All the lighting rings available for dartboards, whether for purchase or as 3D prints, are large and, in my opinion, oversized. Hence, my slim and elegant design of an LED ring for a dartboard (Winmau, Blade 6). Concept: The ring is…
This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…
I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Check out the additional models: Settings Value Infill 10% Perimeters 2 Layer Height…
These baseplates provide a fixed place for your insertboxes: in your workspace, cupboard, drawer and all sorts of cases. The interlinkable systems allows bigger sizes than any printbed. Besides the injection-molded industrial/trade type…
Schwibbogen Wartburg und Trabant mit Leipzig Silhouette. Es wird noch eine 10er LED Mini Lichterkette für die Beleuchtung, Kleber und etwas Geduld benötigt. Ich habe diese Lichterkette verwendet und damit funktioniert es ganz gut, es gibt…
Stackable Insertbox 1x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
Stackable Insertbox 1x1 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
Stackable Insertbox 2x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
Stackable Insertbox 1x2 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
Stackable Insertbox 3x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below this variant is available commercially as injection molded parts, and probably easier to…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. Stackable Insertbox 1x4 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert…
Stackable Insertbox 1x3 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
Custom Insertbox for 36 AA-Batteries, following Bodo's Stackable Insertbox portfolio (with kind consent from Bodo), matching to the 2x2 full height version. Feet are taken over from the original, too. Version 1.1 - 14. December 2022
Stackable Insertbox 1x2 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link above this variant is…
A dartboard printed with MMU2S. Intended as a pendant for dart aficionados turning over for 180 events. Made using Blender. Print instructions Download stl files into PrusaSlicer. As downloaded will produce about 150mm diameter. I…
Stackable Insertbox 2x2 units in footprint, 1/2 height, 2x2 grid two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-21 v2.2…
This is just one box of a bigger system with more than 80 variants in size and partition. Find the whole overview here. Stackable Insertbox 4x3 units in footprint, full height compatible with Sortimo/Bosch/Auer/others in size many…
Stackable Insertbox 2x3 units in footprint, full height, 1x2 grid compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-24 v2.3 initial public release Production tested with 0.25,…
Stackable Insertbox 1x1 units in footprint, 1/3 height, 1x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2…
This is a replacement gear for a smart blind automation motor. I bought several of these motors and after 5yr the plastic gear inside each has started to disintegrate and crumble. The stacked gears in the motor are mostly metal except for…
Stackable Insertbox 2x3 units in footprint, 1/3 height, 2x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-26 v2.3…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
Tisk na dvě poloviny, podpěry, PLA.
I printed the box, lid and organiser in PP because this is flexibel and won't break when traveling. The flightholders were printed in PLA
Wanted to make LED ring and Camera mounts for my Dartboard Setup which was easy to print. This design is adapted from this website (https://docs.autodarts.io/3d-printing/). Github for autodarts is https://github.com/autodarts Discord…
This is my custom dartboard lighting model. It can be printed without the names. The assembly is very simple, since the pieces are male-female. You only need to put supports at the ends of the segments. You need arround 2m of led light.…
I really like the bike heartbeat by tgsparky77 on Thingiverse, so I decided to Remix it and make a Swim Bike Run version. There are two sets of STL files included. The first set is the original Heartbeat Remix. The second set incorporates…
~ UPDATE: 03/01/2024 ~ The amazon links provided below are my affiliate links, if you use those links to buy your hardware you will also be directly contributing to me as well. Please consider using those links if you need to buy the…
Small details on the heart, therefore, printing with layer 0.1 is preferable. Print-in-Place, no supports ✅ Don't forget to give me a like 🧡 Share photos of your prints 💔
This is a exhaust plug for a dirt bike or quad, designed so no supports are needed. this should work for both 2 strokes and 4 strokes, but if you are worried just scale it up or down to your liking. 10% gyroid infill seems to give it a…
I designed a series of honeycomb-style keychains featuring various dirtbike brand logos and more in other parts. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The…
I loved this little toy when I was a kid. I recently got one and really wanted to try a 3DP version so here it is. The model is split into left and right sides and uses 4 materials (PLA Red, Blue, Silver,Black @ .020mm SOLID layers) .…
Can be printed either upside down or right side up. In either orientation, I recommend using organic supports everywhere and either a 0.15mm or 0.20mm layer height. I added two different heights, 26mm and 20mm, to hopefully accommodate…
bring your dart game on a new level. With a self printed light ring. You can stick a normal LED stripe on the inside of this ring. I used this one for my build: https://amzn.eu/d/9oLgnr6 Advantage of this stripe in my opinion is the fact…
Alternative zum herkömmlichen Start. Hier können die kleinen einfach die Kugeln rein werfen und schon gehts los. Super schnell hintereinander. Damit ist richtig was los auf der Bahn. (am Besten ohne Hammer und ohne Wippe ;-)) Kann auch…
Sehr passgenau damit das Board sich nicht leicht verdreht wie es bei den mitgelieferten Befestigungsmöglichkeiten ist
einfache, stabile und funktionale Wandhalterung Markierungshilfe für Mitte / horizontale / vertikale Ausrichtung 100% Infill / 0,4mm Düse / 0,2mm Schichtdicke / PLA Schrauben zur Befestigung am Dartboard: 3 Stk. 4x25 Schrauben zur…
Full suit available just send me a message
This is a wall support for a dartboard in case you wanna move your only dartboard to multiple location and you've run out of supports. Make it full so it's strong. Have fun! UPDATE: A more refined V2 has been Uploaded, both version…
Heartbeat Vase for vasemode If you like it --> press like it :-) Make your loved ones happy with this vase! Remixed the georgeous model by DaveMakesStuff , that you have high quality with smoother surface you can print it in vase mode to…
Stackable Insertbox 1x1 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
I kept braking levers and didn't wont to buy any. so I mad my own 100% infill recommended
its a prop for mm2 cosplays or for display or just for your average Roblox fan (it is recommended to print with , and it is a really sharp object so be carful when removing supports or when being held.)
Remixed sushimoto's gear which had a perfect teeth fit but my buddys Benz had a different shaft size (6mm) Print Settings Supports: Yes Resolution: 0.2 Infill: 100 Filament: PETG
Print flat side down. .4 nozzle .12 layer height supports :yes
I looked for grips for motorbikes and didn't find much so i designed my own. works on most standard handlebars even bicycles. i designed them to look like the mx pillow top grips.
Ersatz Verschluss für eine Katzen-Transportbox Pet Caddy Steht drauf, das scheint die Marke oder das Modell zu sein.. Die Maße der Box müssten 55 cm x 37 cm x 33 cm sein laut gefundener Angaben im Netz. Neu ist noch die verstärkte…
Custom-designed velocity stack / intake funnel for 2-stroke carburetor setups – originally developed for a Wartburg engine. Printed in flexible TPU 82A for vibration resistance and durability. The internal helical spiral guides airflow…
Cute Cat heartbeat sign, 2d home decor
This is a simple children's ring, medallions and a pendant in the form of hearts with holographic animation (yes, my daughter loved it!). The video shows how hearts "pound": I decided to use the holographic principle that I showed in…
Heartbeat keychain: a quick and easy gift to print for Valentine's Day Category: Fashion
This is a three part cement mold I printed to make a super cute succulent planter. I wrote an instructable on how to use it once it is printed out. https://www.instructables.com/id/Lovebot-a-Cement-Planter/ Print instructions Details on…
Short front brake lever for a kayo motorbike. printed from PCCF 6 walls 40% grid infill .2mm layer height
This baby heart (Pinard stethoscope) horn can be printed in one go without support. I would like to see how other people made and use this for themselfs, a ‘make’ would be very nice. Thank you.
This is a remix of bodos stackable insert boxes. These boxes are for the corners of a L-Boxx so you can utilize the extra space, which isn't a enough for a full size box. Pay attention to which corner you want to print, you maybe need to…
Level up your dart games. With this printable dartboard lighting circle powerd by LED stripe. It consists of four parts with legs and four connecting parts (to be more stable). The connection of the parts to each other is made by a…
Heartbeat Wall Art - Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Clean lines. One rhythm. One heart. This design turns the universal heartbeat…
DE: Eine Adapter für eine 15x15x40mm Mini-Wasserwaage zum Leveln deines Dartboards. Der Adapter sollte sich einfach zwischen den Double und Triple-Ring klemmen lassen. Wenn das nicht funktionieren sollte, kann man ihn mit bis zu 3 Darts…
Stackable Insertbox 1x1 units in footprint, 1/2 height two of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
Allgemeines Habe hier eine kleine Box in Form eines Herz entworfen. Der Deckel benötigt keine weitere Skalierung. Das Modell ist beliebig skalierbar. Druckeinstellungen Drucker: Prusa MK3s Schichthöhe: 0,15mm oder 0,20mm 10% Gyroid Infill…
Wall-mounted phone holder designed for dartboard use. This version is sized for the Samsung Galaxy A55 , so the fit is based on that phone dimensions. It keeps the phone visible, secure, and easy to access while playing darts or using a…
All the insert boxes I've found online so far didn't fit the L-Boxx grid perfectly (especially the L-BOXX 102), so I made my own.
This model is a point of a dart for electronic dartboards.
Boxes with label for the L-boxx cases made by Sortimo and Bosch, for every box print 4 pins.
Heartbeat earrings pendant: a quick and easy gift to print for Valentine's Day Category: Fashion
XLR Durst Cap / Portblocker I Printed it in Extrudr Semisoft TPU Repost original: XLR cap by vitalyu - Thingiverse
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Holder for the Winmau Blade 6 Triple Core Dartboard (3032) to use Plasma Dartboard Light (4300) without Wall. I am using it on a Winmau Xtreme Dartboard Stand 2 (4020). There are two versions. One with a click-in Mechanism that clicks in…
Hallo Kollegen, Wer den Deckel, wie ich, schon mehrfach kaputt bekommen hat, kann ihn nun nachdrucken. Wurde vom Original abgeleitet und passt perfekt. Grüße Bonsai
Just a cleaned up version of Killerbart's design. Actually designed it from ground up using Fusion360, but it was still their idea! I found their version didn't slice well, loads of rough edges and bits floating in space... Category: Art
This should be printed in TPU to make it more impact resistant. I used a 0.16mm layer height, but anything below 0.2mm should be fine. There is a 3.2mm hole for a nail or screw.
Show your love for your wiener! ❤ Scale to any size. Dachshund is 1.2 mm higher than the rest so you can change color at layer height. No MMU needed. Hang with 3M adhesive strip.
Holder for dart players using the Winmau Xtreme Dartboard Stand 2 (4020) together with Winmau Laser Oche (8510) as throw-line. The dartboard stand has 34mm diameter. You'll need two M3x12 screws and two M3 nuts. I recommend printing with…
if you don't mind having to rearrange each number when rotating the dartboard, these might be for you.
Eine kleine Zusammenstellung unterschiedlicher Wartburg Logos
Sortboxes for the Auer Eurobox (20 x 15 x 12 cm). The boxes come in thre different hights and with and are stableable. Hights are a fraktion of the total possible inside Volume and come in ⅓, ½ and ⅔. The with of the Boxes as well com in…
The Heartbeat Dancer: Kinetic Fidget Sculpture Summary: Capture the rhythm of romance with this unique Valentine’s Day kinetic sculpture. Featuring a stylized dancer emerging from a pool of ripples, this model serves as both an elegant…
I designed the MotoGP startbox. You can print it with 0.4 nozzle and 0.2 layers. Tree parts to print: The bottom, the top and the wheels. No brim needed.
As far as I am aware, there are two Sortimo L-Boxxes for inset boxes. One is the i-BOXX 72 and the other is the L-BOXX 102. I was looking for some small boxes, but none of the models I found were suitable. Therefore, I created this model.…
Centre wall bracket for GrandBoard
Elfbar Elva Transportbox mit Magnetverschluss 4x neodymmagnete 6mmx3mm
Easy to print Heartbeat with "Trabant" logo.
Dartboard ring holder “PATA” .stl cleared of embossed text and logo.
I scaled to 30% for doll houses and 5yr old tea parties.
Mehrwegdeckel für 500g Joghurtbecher gut in TPU oder PC zu drucken kein Support nötig
A simple yet optimized for 3d printing model of strawberry supports. Also available for printing in stacks. PETG is suggested since it can withstand outdoor conditions way better than PLA. Models: Initial release Strawberry support split…
500g Joghurt werden selten auf einmal gegessen, daher dieser Deckel um den offenen Joghurt wieder sauber abdecken zu können. Ich habe versucht möglichst materialsparend zu gestalten und mit einer 0,4mm Düse optimiert auf 2 Wände. Da beim…
🏀 Basketball Heartbeat Wall Art – 3D Printable Decoration Bring the passion of basketball straight onto your wall with this dynamic Basketball Heartbeat Wall Art . Designed for fans who live and breathe the game, this piece combines a…
Hier ein 3D Druck von meiner Eier Transportbox. Mit Platz für einen kleinen Salzstreuer. Du benötigst 6 Magnete dafür. Durchmesser: 5mm. Höhe 4mm. Schon 6 Monate in Gebrauch. Auch für XL-Eier geeignet. Den Deckel habe ich zusätzlich mit…
This will fit all winmau or other dartboards with the metal number/score ring. These clips are replacement parts made by myself. Created this Triple Core design but also a blank one! Happy printing!
for the highest durability please print with 100% infill.
Model slouží jako světelné okruží k terči na šipky. Pro magnety 10x3
