Liczymy pasujące modele…
This is a Charizard sculpture based on its original artwork on the cover of the (western version of) Pokémon Red Version. It was originally meant to be a display stand for a Game Boy cartridge. However, since I didn't want to stray too…
This is a Pikachu sculpture based on its original artwork on the cover of the (western version of) Pokémon Yellow Version. It's so chubby! And much cuter than the modern slender version, imo. I was actually very surprised when I noticed…
Heart suspended in strings artwork. Single and dual colour versions available Print at 0.2mm layer height If using Bambu Studio make sure your wall generator is set to Arachne. See a video: https://vimeo.com/860773935?share=copy
I had an old Samsung Wireleless puck I wanted to start using to spare my USB-C port the stress of being used daily. There were two or three available but all of them had significant problems and didn't suffice in my needs. This model…
Where to mount phone holder in Smart EQ Fortwo 453 car? I found several phone holders but no one is best for my car so I decide to develop something by myself. And it can be used also as pen holder. You can see video here I made lot of…
In honour of Pokemon Go's Turtwig Community day (September 15th) I have knocked up a Turtwig one piece and multi-material model Needs supports... Print instructions Category: Creatures
Summary This is a model of a Smart 450 / ForTwo in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
A holder for an X6Play smartwatch from Xplora. Printed with Organic support. Have fun!
2D artwork of Thumper from Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Feathers Artwork Prints without supports and can be scaled up or down within reason. In the picture it is printed in Sovol Silk Purple Rainbow which I think makes it look rather Peacock like. :) Filament link: https://amzn.to/3O5qJcI
An intriguing coaster designed so that two of the same shape can be interlocked together for compact storage, and then used either separately or together under your drinks. An optional coaster storage base is also provided which will hold…
This is one thing I have had folks request a lot, Hope you are able to use it! I used rafts for the holders only just in case. I had to tilt them at an angle on the bed to get them to print on my prusa mini. Click the following to see…
From thingiverse https://www.thingiverse.com/thing:5636189
This Dragonfly artwork prints without supports. I would advise printing at 0.3mm layer height. You should be able to see the strings in the slicer preview (in Bambu Studio set wall generator to Arachne). You can achieve the change in…
I've made a charging stand for a Huawei Smartwatch GT 2 Pro. Just put them together, No gluing, No screwing! Print instructions Model created with tinkercad Printed in Prusa PETG orange 06/20/2023 I created a new top (Alza). The wider USB…
This is able to hold two dragons that intertwine(wrap around each other) I had seen a need for this and had a lot of folks ask for one and was lucky enough to find a good design to follow off with. Hope you enjoy!
A stand that ensures your smartwatch is always in its place and your charger never gets lost. The charger fits perfectly into the opening, keeping it securely in place when removing the watch. However, if you need to take it on a trip,…
Modified the original from Jarda K 66 to fit the charger for my new watch. I printed @ 20% infill, with supports.
This model was updated 29DEC2022. Please, DON'T print the previously released files !!! This is my interpretation of the NS Laes / DB Offs55 Autotransportwagen in Gauge1/1:32. Please take into account it's pretty large, measuring over 70…
Caps for the tow eyes on Smart 450s. It MIGHT fit other models, but haven't tested it.
Mechanical replacement buttons for Pebble 2 smartwatch. Buttons have a slight top ridge to allow for easier fitting to the watch, but that does mean they are a tight initial fit into the plates. If you find the buttons don't push through…
This model is intended for the 8tool INDX upgrade for Prusa CORE One+. The model with the sample photos was printed with these 8 Prusaments: Pristine White Vanilla White Marble Grey Royal Blue Azure Blue Gentleman's Grey Mystic Brown…
Einfach altes Teil abmessen, passende Abdeckung mit 2x Scheibe ausdrucken.
The size and number of insulators (with labels) can be easily modified in OpenScad model which is included. All files in ZIP archive: OM2JU_Linked_dipole_Insulators.zip Quick building instructions of complete Linked dipole are in…
These 3D printable models of the "Love Yourself" album artwork were created for my significant other's request. The designs feature a flower and heart, and should be printed with PLA at a .2mm resolution and a wall line count of 10. By…
A romantic decorative sculpture featuring two intertwined hearts pierced by a single arrow. Perfect as a gift for Valentine’s Day, anniversaries, weddings, or as a modern love-themed decor piece.
Suggest printing with 100% infill. The bookmarks are 2mm thick you can cut them in the slicer to create thinner e.g. 1mm versions.
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 171mm x 99mm x 6mm (6.75 x 3.88 x 0.24 inches) Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is a…
A smartwatch stand for my kid's 4G/GPS smartwatch produced by Garett - model Trendy 4G. The magnetic charging cable slides into the slot and is hold there in place.
Nach der Umrüstung meiner Rolladen auf Elektroantriebe brauchte ich Abdeckungen für die Öffnungen der ausgebauten Gurtwickler. Zusätzlich habe ich einige Abdeckungen von weiterhin mit Gurt versehenen Rolladen ausgetauscht. Die…
a 2D artwork of Goofy Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Very tight fit for Galaxy Watch 4. Print, test, leave a comment or suggestion and enjoy. https://buymeacoffee.com/thorben
Smartwatch charging cable adapter made in China. I made it so that it can be charged just by putting it on.
This is my new artwork for MotoGP 2025. The piece can be printed as a single piece and hung on the wall or you can print both sides and it and will stand unaided. It can be scaled up. It uses all the 2025 tracks and the 2025 bike shape…
Love Cow Vase is a delightful tribute to love and affection, designed especially for Valentine's Day. This adorable cow features hearts instead of spots, allowing you to print the hearts separately from the body in different colors,…
Spanish Style Tile Artwork : Wall Hang gcode includes color change at z height. 3 colors (note pic)
Diese Gurtwickler-Blenden sind an vielen handelsüblichen Wicklern einsetzbar. Lochabstand 135/160/180/215 mm Gedruckt aus PETG, PLA sollte auch problemlos funktionieren. Materialbedarf ca. 17 -25g je nach Größe Druckzeit ca. 1 bis 1,5h…
I created this charging stand for my Samsung Watch3. I'm sure it will also work with a Samsung Galaxy Active2. Some double-sided tape is needed to keep the charger in the mount. Print Settings Printer: Hypercube Evolution Resolution: 200…
This is only adapter for Amazif T-Rex watch. Original Dock station is here: https://www.printables.com/cs/model/342610-universal-smartwatch-dock-apple-google-samsung-ama
Da bei der Galaxy Watch 3 Titanium ein Edelstahlarmband montiert ist, kann man die Uhr nicht auf der Ladestation IP-P6300 laden. Um diesem Problem aus dem Weg zu gehen konstruierte Ich eine Ladestation in die das Qi-Ladepad eingebunden…
Für verschiedene Smartwatches verwendbar.
Layer Height: 0.2 Infill: %5 No Supports
Completely redesigned, less plastic, on click assembly, rotated dock specifically for pixel watch 2, cable does not interfere with bracelet watch, shorter base and additional holes for optional 6x46mm metal rod to increase weight and…
I didn't want to use the crappy ABS mount for the original speakers. New speakers were a bit big for the original so I made these. I wanted to preserve the original harness connector to make install easy. Looks and sounds great. Should…
The rubber coating on the volume knob on many smart fortwo 451s (and likely other models) evidently decomposes over time and turns into a messy black goo that rubs off and gets on everything. To replace/repaint the knob, you need to take…
a holder for the Fossil HR Smartwatch with hidden cable routing that is guided straight down the holder. The normal supplied charging plug can be used, it is slightly conical and therefore easy to press in and holds perfectly. No glue…
English: I have made a remix of the 22mm strap since my watch is only compatible with 20mm straps, I have also left the original design in 20mm and also a smooth one easier to print. Español: He hecho un remix de la correa de 22mm ya que…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The original artwork was in bad shape, so it was painstakingly restored to allow the creation of a detailed lithophane. There is a version for both FDM and Resin printers The stl is very detailed and might take a while to slice on older…
This is a stylish Smartwatch Holder for the GT3 42/46mm Version. Easy to print without any supports. For the assembly you can stick both parts together. Recommended to assemble is to glue both parts with Loctite 416 or an other glue for…
This is the "Chicken Head" wheel cap for the Smart ForTwo (450). Might work on other models, but I haven't tested it.
As a Luthier I have always loved to modernize old instruments and have made a few electric lutes. This was the first I designed for 3d printing. My first test print was in PLA and unfortunately bent too much to support good play but with…
I made this watch stand for my sons watch, so he can just leave it there, when it's not needed and I know, that i'll be loaded, when we need it. (of course, the watch was nowere to be found, when I wanted to take a picture of it :-D )
This is the wheel cap for the Smart ForTwo (450) used '98 to '02. Might work on other models, but I haven't tested it.
Ladeschale für China Smartwatch Ladegerät.
Pebble 2 (SE and HR) smartwatch replacement buttons. The pictures show the buttons printed using Polyjet, not FDM. Material shown is a Composite of Agilus Black (which is Shore A 30), and Vero White (which is rigid). The composite…
The frame is suitable for artworks of 150x150mm, the thickness of the artwork is within 2mm, and the viewing range is 146x146mm. If the frame needs to be placed on the desktop, please print the Support file.
This is a Hueforge STL of an Charmander/Charizard Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with…
Kleines aber nützliches Tool um seine Spanngurte schnell aufzuwickeln. Mit Sechskant um durchrutschen im Akkuschrauberfutter zu vermeiden. Ich empfehle 100% Füllung um maximale Stabilität zu erreichen. Druckzeit unter 2h mit PTEG.
Soporte para smartwacht Coros Pace 3 , en los archivos encontrarás el soporte por si llevas puesto en la mano derecha (dret) o en la mano izquierda (esquerra). De estos hay dos modelos uno para facilitar la extracción, ya que el mio queda…
Charging Dock for Square/Rectangle dial watches (1.7 to 1.8 inches) Need to scale it to 10% for the correct size (will try to fix that soon)
Adjunto dos versiones: La versión V1, que es prácticamente igual en dimensiones al reloj original, pero en este caso está compuesto de dos partes que deben ser fijadas con adhesivo (el reloj no gira, está fijo). Esta versión tampoco…
a rechargable stand for honor band6 smartwatch
For Fossil watch Gen 5, stand, charging dock Simple stand without support structure, little material consumption of 9 grams ;) Happy printing
Charging Stand Cradle - Charging Dock will work for Huawei GT2 - GT - GT 2e or any magnetic charger puck with dimensions 40,5mm outer diameter & 10mm thick charging “puck”. You will probably need supports, see one pic of how I sliced(in…
This is Bloodseeker from the video game Dota2. I sculpted this live on Twitch tv using polymer clay and hand painted the model. Then 3D scanned my model and cleaned it up, prepared it in blender for 3D printing. In the photo I've included…
Xiaomi SmartWatch Holder für Xiaomi Watch S1 Active
Hey ! Voici un petit hommage à une licence de films époustouflante, Star Wars. Voici un artwork de l'épisode 4, un nouvel espoir, sous forme de lithophane. En espérant que cela vous plaise ! Hey! Here is a small tribute to a stunning film…
These are replacement brackets for surface-mounted belt winders. The original brackets are riveted into the belt winder housing. There is one bracket with a small hole and one with a large hole and washer, depending on whether the rivet…
Phone and smartwatch stand (Samsung galaxy s23+ and Huawei GT2 PRO)
Top & Bottom holders to attach a walking stick to the frame of the TGA Vita X Mobility Scooter (Heartway in the USA)
📝 Description du modèle 3D 📝 (FR) Ce modèle 3D représente une créature hybride entre un arbre et un démon, où les racines et les branches s’entrelacent pour former une silhouette à la fois organique et monstrueuse. Parfait pour les…
You and your kids are proud of their artwork, but how do you display them? And given how many “master pieces” they bring home, you quickly run out of wall space to display them. What to do, what to do? Introducing the Artwork Hanger. This…
Dachshund Artwork, inspired by and with a reverent bow to the art of Pablo Picasso. This is a presumptuous attempt to bring this simple yet elegant sketch to the third dimension and make it experienceable to other senses, i.e. make it…
This model is part of our 1 day 1 project youtube series. You can change the charging station cutout to include other watch brands. Printing: Just print the base as it is, and the round part on the side with a support for the connector.…
Was looking for a solution to hold my phone in my Smart Fortwo without drilling. Holder copies the curves under the navscreen and holds on high bond double sided tape. The holder is optimized for an iphone XS with case, but you can easily…
Abdeckung für Rolladen-Gurtwickler. Innen-Maße: Höhe vorne 127,5mm, hinten 133,5mm Breite vorne 45,5mm, hinten 51mm Die Außenmaße sind wegen der Materialstärke dementsprechend größer Gurt-Loch-Maße: Höhe 20mm Breite 30mm Abstand…
2D artwork of a dragon I've broken out the various colours, in case you'd like to try printing it as a colour print. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep…
A display for showcasing hueforge prints of album artwork/covers 120mm x 120mm in size, similar to the “Now Playing” album artwork in music players. There are model variations of 2mm and 3mm thickness and also version with stand.…
Smart forTwo, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
This is a large and beautiful sculpture/artwork you can print and paint. The full dimension of the final artwork is 1x1 meters, or 100x100cm (~40x40 inches). The height of the relief is 3cm (~1 inch) at the highest point. The woman in the…
Peaky Blinders Thomas Shelby Artwork - Hueforge NO NEED AMS OR MMU TO DO THIS Poster created using Hueforge. The model can be scaled to the size you want. When you download the file inside you will find all the instructions that will tell…
A Visor Clip/Mount for your Resqme suitable for Smart Car Fortwo (451)
Simple basic 10mm plastic retention nut for a ForTwo smart. While you can buy this online, it's not something that you can just get quickly if it's "missing"- it's used in the underbelly tray retain, the splash guard underneath the same…
2D artwork of Venom Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Since the magnetic charging cable sits too loosely on the watch, I decided to design this simple station. Perhaps it fits other smartwatches as well. However, the charging plug have the following dimensions: 7mm width 22mm lenght 9mm high…
Corresponds with this article https://www.homegrown3d.com/2023/02/08/planet-eclipse-lv1-paintball-art-trophies-key-chains-ornaments-stl-files/ Article has editable tinkercad links and suggestions for key chain parts, ornament hangers, and…
French Cleat trifft auf Gridfinity. Hier gibt es das Mesh für den Gridfinity 4x2 Halter von www.sortwall.de zum Download.
A simple pole stopper for the parcel shelf poles of the Smart Cabrio (450). Might work with other models.
Custom lithophane stand included. Lithophane created by request for members of gadunky.com Software used: Photoshop, Luban, Meshmixer and S3D. Dimensions: 160mm x 142mm x 6mm. Print settings and information:…
You can print “dunewriting.stl” file as one piece or there are four letters can be printed separately. Layer Height: 0.2 Infill: %5 No Supports
This was a simple edit in Prusa Slicer to Spater's design. Trimmed off the top and bottom a little bit with the cut feature and printed with the arms up in PLA+ with the 0.10mm Detail preset. The edits allow the watch to charge with the…
Nice and clean stand/charging dock for the AMAZFIT GTS. Charging connector is just glued in the stand.
I made this holder to store my different wristbands, you have a fake smartwatch that is modeled after the Amazfit Bip 5 (the smartwatch i use) where you can clip in the bands and then place them on the stand, it's better than toss them on…
Provided is the cone and fins for a bottle rocket using a SmartWater bottle. This rocket helped me win a school rocket competition, so hopefully it can do the same for you! Happy printing :)
Verwendete Nozzle N0.4 Schichthöhe 0.1mm Material PLA Infill 0% Filamentbedarf ca. 0,37 Gramm Die neuen Haltekeile klemmen genau so wie die Originalen in der Transportführung, zudem ist es möglich diese an der Unterseite mit…
My wife wanted to have some stencils for her artwork in scrapbooks, junk journals, etc.. So - here are two different stencils I pulled together.
Just a basic watch stand for Huawei smartwatch (don't know if it fits the bigger models. Mine was the GT 2 e model.
