1 / 7
Belt winder wall mount | Wandbefestigung für Aufputz Gurtwickler — zdjęcie 1
1 / 7

Belt winder wall mount | Wandbefestigung für Aufputz Gurtwickler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement brackets for repairing surface-mounted belt winders | Ersatzwinkel zur Reparatur von Aufputz-Gurtwicklern

Ocena
5 / 5
Polubienia
11
Pobrania
101
Wydruki
1
Wyświetlenia
398
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are replacement brackets for surface-mounted belt winders. The original brackets are riveted into the belt winder housing. There is one bracket with a small hole and one with a large hole and washer, depending on whether the rivet is protruding from the housing with material residue or is flat. Fasten the brackets in the rivet tubes with suitable screws.

Print the brackets in 0.3 layer height with 100% infill.

— I would be very happy if you have as much fun with the things as I do. — 

 If you like :-) Thank you very much!

--- German description ---

Das sind Ersatzwinkel für Aufputz-Gurtwickler. Die Originalwinkel sind in das Gurtwicklergehäuse genietet. Daher gibt es einen Winkel mit kleinem Anschraubloch und einen mit großem Loch und Unterlegscheibe, je nachdem, ob die Niete mit Materialresten aus dem Gehäuse heraussteht oder plan ist. Befestigt die Winkel mit passenden Schrauben in den Nietröhrchen.

Druckt die Winkel in 0.3 Schichthöhe und mit 100% Infill.

Tagi