3000 modeli
This Print-in-Place truck is something more than it seems to be. The connectors on the back can hold one of many attachments, such as a Dump Bucket or Wood Transport extension with a crane, all of which can be downloaded from here:…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
Print Details Full truck with cargo: 239g Truck only: 167g Dimensions: 3.25x 5.75 when printed at 100% v2 (6/9/23) Hello! I went back and cleaned up the model a little bit. Here's what's new: Uploaded all of the individual parts The…
Wydruk około 22,76 €–27,81 € nettoWstępna wycena jednego wariantu
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
So that the fun of the game continues even outside the bathtub, I provide two trucks to transport the containers. So let's get to the fun of the game.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Off-Road Semi Truck Based on Fiat 65PC truck (1975) The truck has functional suspension and a proper wheels for overcoming obstacles. Every part has been adjusted for smooth supportless printing. Keep the orientation of the parts as shown…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
I made it larger and opened up the inside of the cab to add a steering wheel and seat. Print instructions Christmas tree truck-ornament remix now a table top model I made it larger and opened up the inside of the cab to add a steering…
Wydruk około 12,82 €–15,67 € nettoWstępna wycena jednego wariantu
Hyper-K Micro Machine The Kei Drift Truck. Inspired by Japanese Kei cars. This is my own desing created from scratch. This model has steering wheels for drift action. Consists of 20 parts , Designed for easy printing without supports. I…
Wydruk około 1,40 €–1,72 € nettoWstępna wycena jednego wariantu
[ENG] Miniature truck with tanker trailer and spare wheels printed in one piece without supports. The model can be printed either as a whole - tractor with semi-trailer connected (it is possible to disconnect it after printing), or the…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
Small truck - container[ENG] A simple model of a tractor-trailer fitted with a container. The model is available in two variants according to printing (in whole and with trailer and in individual parts), and in several modifications. The…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
[ENG] RM-70 Vampire 4D is the third modernization of the rocket launcher vz. 70 (or BM-21 Grad) realized by EXCALIBUR ARMY (previous are RM-70M1 and RM-70 Vampir). The rocket launcher with semi-automatic loading device is based on Tatra…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Introducing the FDM (Fixum Dude Motors) print in place package delivery truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all…
Wydruk około 3,27 €–4,00 € nettoWstępna wycena jednego wariantu
[ENG] Tatra 813 is a Czechoslovak special heavy off-road truck, produced between 1967 and 1982. The basic representative of this type series was primarily the military version 8×8 KOLOS, which was capable of pulling trailers up to a total…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
I designed this miniature crane truck in Fusion 360. It complements the miniature vehicles by agepbiz , Bryan and James Wood , all of which I also printed, but my nephew was missing a crane truck :-) WARNING: CHOKING HAZARD - Small parts.…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
This design is a CRAWLER Gearbox that can replace the stock 2 speed automatic GBX in my UNIMOG RC Chassis (model U5023) . It is smaller and looks more like a gearbox ! The idea is to make the truck more of a crawler type with a lot of…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Sie können es mit PETG oder PLA drucken.
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like the truck by Printed Bits , but the empty engine compartment gave it a little incomplete feeling. So i searched some familiar sites for a suitable engine to bash into it and found this one on thingiverse - it's even actually a…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Grumman LLV (long life vehicle) I've finally figured out how to model the interior so it doesn't need supports. I plan to revise my other previous models to make them easier to print. This print doesn't take too long or use too much…
Wydruk około 12,69 €–15,51 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[EN] Sometimes it happens that a visitor comes with children who are bored and need some entertainment. In this case, simple and easy to print toys come in handy, where the child will have fun both watching them print and playing…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
I wanted to make a more detailed version of my Monster Truck , here it is. I re-designed the body to fit some details (windows, engine sticking out of the hood, and headlights). I re-designed the wheels: axles now fit into the rims, and…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Klíčenka MAN Truck
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ramps fit really good without removing the platform gate and are proven working by my 4year old nephew :-) print twice (mirror one to get both, left and right ramp) originally designed in Catia V5. Unfortunately CATPart files are not…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
I wanted to model a somewhat cartoonish version of a concrete/cement mixing truck. They're my favorite kind of trucks. FEATURES: Fully printed bearing wheels (they are very loose but they roll and spin!) Handle for spinning the barrel…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed on both my MK4 nozzle 0.4 (with latest firmware and PS software) and my MK3S+ with 0.6 nozzle. Print the Chassis first. Put supports under the ends for the wheels. The holes for the axles have been enlarged to allow for a 5 mm…
Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu
Show you love for Chevy Truck with this Button
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1)Läßt sich bei der DM am realistischen mit Shining Silver Filiament drucken. 2) Als Hälften mit der geprägten Seite jeweils zum Drucktisch! 4)Optimale Startschichthoehe 0,28mm bei MK8 Hotend. Läßt sich erstaunlich gut auf…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Tauchen Sie ein in die faszinierende Welt der modernen Ästhetik mit unserer 3D-gedruckten grauen Vase. Diese einzigartige Kombination aus innovativer Technologie und zeitloser Eleganz verleiht Ihrem Wohnraum einen Hauch von Raffinesse und…
Wydruk około 16,98 €–20,75 € nettoWstępna wycena jednego wariantu
Two versions for cement mixers
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
The mechanical emergency door release on the cybertruck is hidden under a rubber insert in the door pocket. This makes it very unlikely to be found should an accident render the electronics unresponsive which could be deadly. This model…
Wydruk około 7,93 €–9,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…
Wydruk około 4,49 €–5,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nice use of space in the door. Both the bin and the lid require supports. I highly recommend using PLA for the support and PETG (or ASA) for the body since this leaves a nice finish without any need for sanding or other post-processing.…
Wydruk około 5,18 €–6,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I Remixed my Remix: https://www.printables.com/de/model/298498-german-garbage-truck-mullauto Now the Garbage truck has a Lid, but i only works good now for the bigger Duplo Trucks, as it has become heavier on the back. But if you only…
Wydruk około 17,22 €–21,04 € nettoWstępna wycena jednego wariantu
Easy to make a cute Firetruck keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Truck Model scale 1:100 with no wheel print with Prusa Mini
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Schublade
Wydruk około 7,64 €–9,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print upside-right so any droop from the bridge is hidden. Recommended settings: Material: ASA or PETG Layer Height: 0.2mm Top Fill Pattern: Hilbert Curve It is snug and hard to rotate once pressed in place so make sure you line it up…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.paypal.com/donate/?business=C8C56MQUF7KQ4&no_recurring=0&item_name=Thank+you+for+donating%21+It+helps+me+create+new+projects+and+get+supplies+%26+upgrades.%0A¤cy_code=USD This is an adapter I created for Peterbilt 520 style…
Wydruk około 5,54 €–6,77 € nettoWstępna wycena jednego wariantu
This is a model car of the Tesla Cybertruck designed for 3d printing and use as USB-stick. If you just want to print it as a shelf model or toy car, just ignore the usb stick part. Features: ✓ Working suspension ✓ Optional working…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wrexham AFC logo zum farbig drucken vorbereitet
Wydruk około 5,44 €–6,65 € nettoWstępna wycena jednego wariantu
Druckbett Schaber Anycubic Für die Fans des Anycubic habe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper Anycubic I designed a Scharber print bed for Anycubic fans. Have fun with it
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
For English see below. Diese Halterung für die Filamentspulen wird auf den Rahmen des MK-Druckers montiert, so dass die Spule in der Querrichtung des Druckers liegt. Bei meinem Drucker hat die obere Strebe die Maße 40,4mm x 6,2mm. Die…
Wydruk około 3,32 €–4,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tiny Boxy Truck Model I Made Check out my game: https://jemcraftstudios.itch.io/the-wind-turbine
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Working with the bed divider: Remove the 5/16 nut on each end and slide out the clamp feet. Be careful - there is a cylinder and spring inside that can drop out. Remove the two side plastic guides and replace with these prints.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pylon/ Leitkegel der für den Dreifarbdruck modifiziert wurde
Wydruk około 7,28 €–8,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
F-150 Pickup truck.
Wydruk około 0,63 €–0,78 € nettoWstępna wycena jednego wariantu
In Kombination mit einem Karabiner eine Halterung für den Hochdruckschlauch des Finimeters bei der Tauchausrüstung.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One of the biggest pains when using RC cars/trucks is when they flip over and you're not very close to your vehicle. This can be when bashing out with your buddies or when at your local track up on the driver's stand. With short course…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Druckbett Schaber Elegoo Für die Fans des Elegoohabe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper Elegoo I designed a Scharber print bed for artillery fans. Have fun with it
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Druckbett Schaber Prusa Für die Fans des Prusa habe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper Prusa I designed a Scharber print bed for Prusa fans. Have fun with it
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Hier findet ihr einen Lustigen Anhänger für euren Rucksack, Er kann an ein Gurtband oder ans Molle System befestigt werden. Es sind STL in deutsch, englisch oder auch ohne Beschriftung vorhanden.
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
See the picture with the distance of the screw holes, my be you don't have to drill. Print the model twice, no support. Drucken Sie das Modell zweimal aus, für oben und unten. Sie benötigen vier Spax Schrauben. Sehen Sie sich das Bild mit…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
The truck bed and hinge of a toy dump truck broke. I created a model that would fit on my Prusa MINI print bed. The truck bed and hinge can be connected with M4 screws or smaller, as long as the head is wide enough to cover the slots. The…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zum befestigen von Stromkabeln. In unterschiedlichen Breiten
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Druckbett Schaber Creality Für die Fans des Creality habe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper artillery I designed a Scharber print bed for Creality fans. Have fun with it
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Bij de kinderen zag ik deze vrachtauto liggen en dacht…..3D printer. Alle onderdelen worden apart afgedrukt. Ik ga ze lijmen, maar er zijn in de boven en onderplaat ook verstevigingen aan gebracht om er kleine vijsjes in te draaien. Ook…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Druckbett Schaber Bambu Für die Fans des Bambuhabe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper artillery I designed a Scharber print bed for Bambufans. Have fun with it
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Druckbett Schaber Artillery Für die Fans des Artillery habe ich einen Druckbett Scharber entworfen. Viel Spass damit. Print bed scraper artillery I designed a Scharber print bed for artillery fans. Have fun with it
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
A universal mount (wall thickness for boards up to max. 25mm) to fix dowel rods with a thickness of max. 30mm over two boards. Even the screws are printable. Therefore the dowel rod can be fixed within the mount and is secured against…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Druckbettschaber zum download.
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a garbage bin which can be placed in the front of the printer in the Original Prusa Enclosure. I designed it to use the free space in front of my printer within my Original Prusa Enclosure. Notes: I printed the objects with 0,2mm…
Wydruk około 7,83 €–9,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My First Creation using a 3d modeler. (I believe this model will print all in one color.)
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Nichts ist ägerlicher, wenn man nicht rechtzeitig bemerkt, das ein Fehler im Filament nicht den Extruder passiert! Die Z-Achse läuft weiter. Erst dann merkt man, dass die Düse in der Luft hängt. Die Folge: Das Filament hat sich abgekühlt…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Join the Patreon or Printables club! Or checkout my paid models ! The truck has a working lever for picking up the trash can and dumping its contents, a working back door, and rolling wheels for added functionality. The trash can also…
This is a fully functional 3D Printed RC Semitruck model. The main attraction includes an automatic hitching system plus power & command delivery to the trailer. Future trailers such as side dumps, lowboys, belly dumps and cargo trailers…
1:64 print-in-place kit card. Assembly required Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version *edit 03.20.25…
UPDATE: I have uploaded a Version 2 that should address every issue in the feedback I've received. I have made the wheels/axles much stronger as well as made a beefier hinge for the bucket. This design prints with NO support material and…
Print-in-place and Articulated Surprise Egg #1 - Tiny Haul Truck 'Making of' video: *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue) Stresstest your 3D Printer by printing this tiny…
Print-in-place and Articulated Surprise Egg #5 - Tiny Fire Truck 'Making of' video: https://youtu.be/LYwZcH8kKiw Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. Both the fire truck and the egg was each…
Transformable Truck Robot. Ptint in place. Based on a Transformable movie character. Printed on PLA, .2mm layer height, .4 mm nozzle, 10% rectilinear infill, 4 top and 3 bottom layers. Use a brim if you have layer adhesion issues. No…
https://youtube.com/shorts/Ss0iSEgnsyo Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the dump truck and the egg was each designed to be print-in-place without any need for…
Zusammen mit dem Designer @MeisterEdel habe ich dieses Testmodel mit meinem Logo entwickelt. Es testet euren 3D Drucker in Bezug auf Toleranz (inkl. Gewinde), Bridging, Maßhaltigkeit, Wandqualität und Oberflächenqualität. Es gibt zwei…
This is a fully functional RC DumpTruck that plays a crucial role in transporting materials like 3D printed scraps, jenga blocks, or debris within RC construction sites. Meant to be used alongside the DIY RC Excavator and DIY RC…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This truck has wheels that turn and suspension that prints together with the chassi also the bonnet and tailgate have a hinge that works To build this model you will need: -glue -3mm metal rod 2x pieces 64mm long for the axels 1x piece…
New! Version 2 is up, with a more robust ladder kickstand :) As seen on HotMakes episode 148, it's a little firetruck with a hinged ladder and chunky wheels! Video link: https://www.youtube.com/live/jzZMH5YQIHc?feature=share Gratuitous…
This Peterbilt 359-inspired truck is made in such a way that allows it to be printed all in one piece. Once it's done, you can pop it off your buildplate and play with it. The wheels spin, the hood opens and the sleeper cab door on one…
This model is one of many Print-in-Place add-ons for my Modular Truck project. Print-in-Place means that all parts are printed in one go with no assembly required. All add-ons can be connected to the truck seen in the pictures. If you…
A tiny haul truck commonly used in open pit mining. Movable wheels and bed, designed to be printed all together. UPDATE: I would suggest printing this model at 2x scale. The fine details print much better and so far my son hasn't broken…
My son has an overwhelming number of 1:64 HotWheels monster trucks. However, I am always unimpressed with the HotWheels branded tracks/accessories that we've bought. So I figured I'd have a go at making my own accessories and what not for…
English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…
I've added a “New Angle” file for people having issues with the overhang in the underside of the bed on the top. Introducing the FDM (Fixum Dude Motors) print in place dump truck. The wheels rotate right off the build plate. There is a…
Silver is 100% scale. Black one is 200% scaled up size. You can print it 100%, 150% 200% or more. Print instructions No supports required. It prints easily on Prusa MK3 with default settings. Wheels should rotate easily right after…
3D print your favourite electric truck for less then your pre-payment of the real thing you will have to wait for quite some time. All parts are printed without support. Wheels are spinning if you use the right parts, which are listed…
Introducing the FDM (Fixum Dude Motors) print in place garbage truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
This is an almost entirely 3D-printed RC version of the CyberTruck. Once built, it has four-wheel drive and four-wheel steering which makes it extremely capable both on and off road. A video documenting and showing the car can be found…
Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate. V2 has newer stronger axles. Find the entire FDM Vehicle Collection here:…
ruck · container minimal screw-lid container, designed for function and form dimensions in mm: container ~ x: 85 · y: 85 · z: 105 lid ~ x: 85 · y: 85 · z: 13 important · make sure that: your filament is dry and calibrated so that it deals…
Introducing the FDM (Fixum Dude Motors) print in place pickup truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
4 way jump for hotwheels or monster jam monster trucks. I have added the .stl and fusion360 file of ramp with out the crushed cars.
This is a fully functional self loading RC LogTruck that other than the electronics and hardware is made completely out of 3D printed parts. The truck uses an esp32 microcontroller as the brain which can then be paired to most game…
This is a modification of my original Print-in-Place Modular truck with just one rear axle. Modules for transporting lower weight cargo (e.g. freight box, car transporting platform etc.) fit this the best. Wheels spin, engine compartment…
This is V2.0 of the MiniDump project, this version has the addition of headlights and a trailer hitching system. It also features revisions on pretty much every part making for easier assembly and better performance. If you'd like to…
My PrintInPlace Peterbilt 359 is not suitable for the tight streets of Europe, so here is its short and agile European counterpart! The wheels spin and the engine compartment opens. This model prints all in one go and requires zero…
Ramps for Hot wheels cars and monster trucks Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 12 Notes: Need supports for the connector area. The rest of the ramp is self supported. Category: Playsets
300% sized tow truck inspired by Lego technic set 9390, all parts were 3d modeled from scratch to be as optimized for 3d printing as possible, minimal support should be required. check the read me for more details!
Scale to prefered size
Original Model (this kit card uses the small version) This model was just for fun, however, it does provide better bed adhesion for those that had issues printing the original model. There is no support or assembly required. If you would…
