Liczymy pasujące modele…
This is a simple hand tool for the proprietary Scubapro low pressure hoses (2nd stage side), and it's a good thing to put in your save-a-dive-kit if you do have those hoses. I recommend printing it with PLA or ABS using 0.2mm layer.…
Just a copy of the Scubapro Tool needed to insert the piston bushing when servicing a Mk20 or Mk25 (EVO) first stage. I got the measurements with calipers from a machined version of this i own. It should do the job just fine, but so far i…
Protective end cap for ScubaPro MK25. Printed in clear TPU with 25% infill.
Adapter that fits onto the dump valve of a 2024 SCUBAPRO Classic BCD. The idea is to attach the adapter to the shoulder dump on the BCD, connect a garden hose, fill the BCD with fresh water, and then remove or open the lower dump valve,…
Werkzeug zum Lösen und Festschrauben von Scubapro Schlauchanschlüssen Das Werkzeug hat zusätzlich zu dem Scubapro-Adapter noch die Möglichkeit einen Bit einzusetzen. Dieser wird mit 2x M3 V4a Schrauben in den Griff eingeklemmt. Tool for…
Just a tool to push out a stuck orifice of a Scubapro G250 regulator. Aka the most overengineered chop stick ever. Might work for a G260 as well, but i currently don't need to open one and thus can't test it. Update 2024-09-05: Added a…
Hand mount platform, to hold the Scubapro nova 200 torch Print instructions Category: Sport & Outdoors Summary Hand mount platform, to hold the Scubapro nova 200 torch Instructions -Print the hand mount platform. Remember to print the…
This replaces the diaphragm spacer ring (11.190.117) on a Scubapro G250 regulator. The little tabs on these rings tend to break after a few decades, who can blame them. The old ones have a thickness of 1.4mm while the new spare parts SP…
This was designed to make the task of putting on the o-ring on the DIN retainer easy when servicing a Scubapro first stage. Simply cap the bullet on the retaining knob and slide the o-ring down into the groove. The tool eliminates the…
kleines Tool um den MD Schlauch zu befestigen. Man braucht noch einen 14mm Maul-Ringschlüssel der Marke Proxxon SlimLine den man passend zusägt. Small tool for attaching the MD hose. You will also need a 14 mm Proxxon SlimLine combination…
Use at own risk. Category: Sport & Outdoors
Just a helpful jig that makes it easier to put on the O-Ring onto the barrel on the threaded side. Simply cap the bullet on the barrel and slide the o-ring down into the groove. The tool eliminates the need to stretch the o-ring over the…
Adapter um weitere Bauteile an die original “Galileo HUD Hands-Free Tauchcomputer Zoom Maske Halterung” anzubauen. Eine Schraube M6x60 V4a, eine selbstsichernde Mutter und der Scubapro Adapter (Artikel # 24.157.200) werden extra benötigt.…
A replacement clip that retains the adjustment assembly on a Scubapro G500 second stage. Category: Sport & Outdoors
Rendering of diaphragm cover, modeled in Freecad. will be attempting to print in TPU, but I have concerns about supports... will update as it progresses. Edit#1 Support worked out surprisingly well. Thickness of outer ring was too much to…
Real life problem. My hobby is scubadiving with dry suit from Scubapro. My inflator button fell off and I did find any replacement parts. Has an enhanced structure, compared to original. For best print quality place vertical, print solid…
Just a simple wrench/key to unscrew the HP seat cover on a Scubapro Mk10 first stage. Print settings don't matter much for this one, i suggest 3+ walls and PETG. Hardware BOM 2x M2 x 20 Countersunk Screws (DIN 965) 2x M2 Hex Nuts (DIN 934)
As named. Use at own risk. No guarantee of proper fitment. Don't fry bacon naked. Category: Sport & Outdoors
Replacement saddle for ScubaPro Mk10 Category: Sport & Outdoors
Replacement for the chrome "S" disc on vintage Scubapro Regs Category: Sport & Outdoors
Replacement faceplate for ScubaPro 108/109 Category: Sport & Outdoors
kleines Tool um den MD Schlauch zu befestigen. Man braucht noch einen 14mm Maul-Ringschlüssel der Marke Proxxon SlimLine den man passend zusägt. Small tool for attaching the MD hose. You will also need a 14 mm Proxxon SlimLine combination…
Protective end cap for ScubaPro MK25. Printed in clear TPU with 25% infill.
