Liczymy pasujące modele…
Easily printable without support and attaches to a European style tow bar with a ball of 50mm. Color can be printed by manually changing filament while pausing print at specific height or in a Tool Changer, MMU or other multi material…
A carabiner with a spring loaded locking mechanism. My first 2 versions of a locking carabiner was with a screw, but it took too long to open and close. As these plastic carabiners are not ment to handle large loads like of a person, the…
I designed this holder so that my 3/8" Impact gun can stay secured while I travel up and down the roads and move my Pit Kart around the pits. He has a nice snug fit and enough side height to keep it stationary on bumpy roads. Hope it…
I like to think of filament pulling as effortless. But when it is easy, the filament tends to slip off the spool and risks getting stuck on the central axis. That's why I adapted the two-roller system to the Prusa Core One's side…
Designed to prevent the extruder cables from sagging and running into large prints. Printed/installed on an MK3S+ @ 0.2 QUALITY with PETG. I recommend printing it vertically with a brim. Requires (2) M3x8 screws for mounting. (M3x10…
Convert any M3 screw to a thumb screw with this print. A M3 nut is used to secure the screw in place. There is also a slot to screw it with a coin, etc.
Ein Kabel-Clip mit zusätzlicher Sicherung in den mehrere Kabel passen mit der Möglichkeit einer Schraubbefestigung.
Additional parts needed: 1x Prusa-mini-display-box-with-raspberry-pi-zero-2 2x M3x10 hexagon socket head cap screws 2x M3 nuts
I tried a lots of the can holder out there but none could hold a can over any rough terrain or road bump. This design fix this, it is less sleek but hold your can securely while you ride your bike. No need to worry about your can jumping…
Secure charger case for Xiaomi M365, M365Pro, Pro2, Essential, 1S, Scooter, Scooter. Design intended to be suspended on the handlebar (handle, axis or bell). If the charger is to be put in a place of passage, install the charger after…
Optimized wheel bolt cap that fits on budget secure bolt. This one tries to look like the original bolt cap, but keeps as much space for the head as possible.
Remix of Toothbrush Holder for One that secures the top to the base.
Recommend Print Setting: 3 Wall loops 4 Top & Bottom shell layers Object Height (Z) - Minimum 4-5mm Designer DemNuhBad
Easier to assemble sheet with through-slot tab.
Can be easily fitted and secured in a hole through the ikea lack table. Poops goes down under the table desk into the bin. For hole drill, I reccomend to use hole saw 44mm. Reccomended material: PETG Reccomended layer height: 0.16mm…
Short Dart 16mm Barrel Collet Adapter Sealed and secured with o-rings ---> Nerf Rival Pilot O-ring sealed and secured, airtight 16mm aluminium barrel collet adapter ---> short dart mod ---> Nerf Rival Pilot. I wanted to convert my Pilot…
Not having found any good cable guides that were compatible NBRs Modder Board, I decided to take it upon myself to make one that I would personally like to use. I printed mine in PLA with a 0.4mm nozzle, 0.2mm layer height, no supports.…
A simple disc holder that is designed to hold 5 DVDs in a stack. It uses a printed knurled screw that prevents the discs from falling out, even if the organizer is turned upside down! The screw may take extra force on the first use. It'll…
I had trouble with friction fit standing up to enthusiastic fidgeting and repeated reassembly. This leaves the friction fit corners unchanged and puts an M4 hole in the middle. Suitable for an M4x12 machine screw.
A little modification for the great hat from @ TypQxQ Just print like the original parts. No brim or supports needed.
The goal is to hold the mmcx in place to avoid any unplug during crash (and vtx burn)
This part snap-fits onto 1.75" rollbars. It has a thru-hole for ¼"-20 screws (buttonhead) to attach cameras or other accessories. If you need it to be more secure, simply run zip-ties through the internal channels.
Description The Bosch powertube 500Wh on my Moustache Bike has the same length as the 650Wh powertube, but on the 500Wh, we have a handle and some empty spaces… some empty spaces and a 3D printer you said ? I initially wanted a place to…
This was all printed in PLA on the K1 Max at 0.2mm layer height. I used a 15% Gyroid infill, but I'm assuming almost any infill is fine. No supports are need for any piece. For the bolts, I recommend 100% infill and a smaller layer height…
Can be use to revive your child's Lunchbox!
I made the base of the plate holder .5mm thick and the sides a little thicker and added holes to secure it.
This is a wire guide/support that can be zip-tied to whatever a zip-tie can attach to. Prints best on it's side. No supports needed. Size: 12.5mm x 12.5mm x 26.25mm. Hole: 8mm Slots: 6mm x 2mm
This is an enclosure for cheap tracking devices commonly sold as "LocaTag" with a 36 mm circular design. The enclosure mounts to rear lights on bicycle racks that have a 50 mm bolt spacing with 5 mm bolts. The cap is secured with a M3 x…
you need to buy some new dice first before you can make this, as the transparent PETG doesn't let you make it clear enough for the canister itself.
Razor blade disposal box in two sizes—secured with a mechanism to prevent blades from falling out (e.g., by children or during transport). Hinges For the hinges I recommend a 0.2mm nozzle. Disclaimer No AI was used for this model.
I have no door on my printer room as I store my climbing/camping/snow gear in there and its a pain with large items. Anyway, the lights and noise annoy me at night. I got a sound dampening blanket, lined with grommets. Rather than…
Adapter to mount a B+M Ixon Rock front light underneath a Quad Lock Out-Front Mount. Features an adjustable hinge angle and a bottom groove to secure the light with a rubber O-ring or rubber band. Print Settings Material: PETG or ASA (…
I made the base of the plate holder .5mm thick and the sides a little thicker and added holes to secure it.
Secured by Glock. Tagged NSFW. Filament change @ 5mm for lettering.
![Santa Hat for tow bar of car (secured). Hitch cover [thread remix]](https://media.printables.com/media/prints/699190/images/5490513_51ff69b0-4e1b-4b62-bd28-fe0f32647a2a_9b1cb6ad-8dda-4cf1-8e38-cd0891e14783/key-remix.png)
