Liczymy pasujące modele…
I've had issues with the original version of this restrictor modifier failing due to layers delaminating. Because of this I have re-modelled the complete restrictor and reduced the gate by 1mm. This makes it perform the same as the…
Edit 3/26/2021 Added a v2 plunger. Made it a little bit taller to it doesn't rattle as much and modified the geometry of the stem. Left both versions so you can print out both and decide for yourself which one fits your needs. If printing…
I find the post actuation throw of Seimitsu LS-56 / LS-56-01 joysticks to be too large. Post actuation throw is the distance that the joystick travels after the microswitch has been triggered and until it hits the restrictor. Once…
Octogonal restrictor for Seimitsu LS32 arcade joystick. It is recommended to print it using 100% infill and a resistant material (i.e. PETG/ABS/ASA). .STEP file is provided for any further modification. UPDATE 21/08/21: .DXF file has been…
Seimitsu nuts for 30mm PS-14-KN Printed in 0.2 layer height 3 perimeters. If it is to tight try the loose version. If it is still to tight, reduce extrusion multiplier to 0.95
Printed in Gold PLA CC3D with 30% infill 3 walls. M6 Thread fits but is tight so at the begining need to use little bit of force to screw it on. V2 have better thread clearance and bigger recess diameter for the lever shaft.
Sanwa JLF-P1 plate with modified mounting holes to fit a Seimitsu LS-56 / LS-56-01 Allows you to use a Seimitsu LS-56 / LS-56-01 in a arcade cabinet panel / fight stick that typically has a mount to fit a Sanwa JLF & JLF-P1 plate. I've…
Buy me a Coffee! 3D printable gates that will fit these Seimitsu joysticks: LS-33 LS-55 LS-56 LS-58 LS-60 LS-62 SEL-70 / SELS-70 Settings: This model was designed with a 0.6mm nozzle and PETG in mind. Should print fine with 0.8 and…
both have the least possible amount of throw
3 Gates for Joystick Seimitsu LS-40 Original Square 18x18mm Disc 18mm diameter Shortest throw octagonal Step file provided for easy modification to try other type of gates ( 2D, no diagonal, etc. )
Printed in PLA, 100% infill. Unscrew the current mounting plate from your joystick and fit the adapter plate using the same screws. The joystick can be then screwed to the Vewlix CP mount using the standard M4 screws. Compatible with the…
Adapter plate to allow a Seimitsu LS-32 or LS-32-01 to be fitted directed to a Taito Vewlix control panel. Once fitted, the CP > underside ball distance is approx 24.5mm. The standard SE or SS mounting plate can be removed and the printed…
Seimitsu Wrench for 30mm PS-14-KN Nuts Print in 0.3mm layer height.
Seimitsu LS-56 restrictor gates, created for my Arcade Bartop because there is no automatic ones on the market for Seimitsu Joysticks, planed to use in various models of Seimitsu as an extention but actualy this design needs to remove…
The Seimitsu LS-56 is one of my favorite joystick levers of all time. Comes standard with a square gate, but depending on your preference you might like an Octo gate more as they allow you to easily identify corners when moving the lever…
This adapter is intended to install american style arcade buttons (Industrias Lorenzo/Happ, which usually need a 28 mm diameter hole) into a hole for japanese style buttons (Sanwa/Seimitsu, with a diameter of 30 mm), allowing the button…
Afin d'adapter mon Joystick Seimitsu LS-62-01-SS a mon panelle de Naomi, j'ai conçus cette plaque de remplacement afin de fixer facilement le stick merci a SmallCab - Arcade et Pincab Shop de m'avoir aidé en me fournissant les plans du…
Standalone 4-way cross, 4-way X, and 2-way bar restrictor gates for the Seimitsu LS-32 lever, based on the shapes of the dark blue secondary gate that the LS-32 is equipped with as standard. Also included is a 4-way restrictor with 8…
Just a Shaft and Dust cover for Seimitsu LS-32 since I know you can buy the SC verison but if you were like me a bought the Seimitsu LS-32-01version then there isn't a after market covers from Seimitsu or other makers. Print works with…
Preint with TPU 0.1 mm layer Use flush nippers no cut typical TPU blobbing
This is a modification of JenniferDigital's fantastic joystick that accommodates a Seimitsu-style joystick.
Print in PLA 30 % infill For smooother top surface can use ironing
Preint with TPU 0.1 mm layer Use flush nippers no cut typical TPU blobbing
Just a Shaft and Dust cover for Seimitsu LS-32 since I know you can buy the SC verison but if you were like me a bought the Seimitsu LS-32-01version then there isn't a after market covers from Seimitsu or other makers. Print works with…
Print in PLA 30 % infill For smooother top surface can use ironing
Just a little tool to open the sometimes stubborn rear nut on your arcade stick buttons. Made specifically for the Seimitsu PS-14KN 33.5mm nut. All you have to do is remove your 2 wires from the button and push this onto the nut on the…
