Liczymy pasujące modele…
This is a two handed sword for Dummy 13 inspired by the Dragon Slayer sword from Berserk. It is about 140x16mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out MattoDesign's…
Berserk: Dragonslayer "That thing was too big to be called a sword. Too big, too thick, too heavy, and too rough, it was more like a large hunk of iron." Inspired by Kentaro Miura's Berserk I created this model in OnShape using the…
A 3D model of the famous Hanafuda earrings wore by Tanjiro in Demon Slayer. I've decided to make my own model since those I found around are difficult to 3D print in multi-color in a single piece (they work flawlessly with the new color…
3D modeled Funko Pop–style figure of Tanjiro Kamado from Demon Slayer, with stylized details and signature outfit.
Hi everybody, This was a character thought of and designed form scratch for the Prusa sla sculpting challenge. I wanted to make my own character for this challenge. The expected time for designing this figure was a little to short. Making…
This is the dragonslayer from the manga berserk for those who don't know. The size of the file is 1/100. There are 3 files one with the blade (to print 2 times), one with the gard and one complete. Print instructions Category: 3D Printing…
Simply use the old pause and swap technique or a MMU. Miss Kanroji - https://www.printables.com/model/802899-demon-slayer-miss-kanroji-keychain
Tengen Uzui Demon Slayer 1st Iteration and 2nd Iterations.
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Optimized for printing in colored 0.2mm layers: Layers 1~3 Grey Layers 4~6 White Layers 7~9 Red Layers 10~12 Black 70mm in length, the most common size from retailer versions. Sized to fit common earring hardware. Keychain versions also…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Nezuko Kamado Demon slayer Funko pop
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint The golden hand of the Kingslayer, Jaime Lannister. Ser Jaime Lannister is the eldest son of…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! Frieren season one last year was a masterpiece, the music, the art, the story, I fell in love with all of it. And with the release…
You can figure it out :) I believe in you!
Armored glove pieces for DOOM Cosplay. It is for glove size 9 (L). All files are for the right hand, so simply flip them for the left hand. Have fun printing :) and big thanks to Brendan Lautissier for publishing this and other parts of…
This was designed to keep it all in one box, without lid lift, and to make setup and tear down faster. If you can print multicolor, I included the .3mf files for the individual player lids, but also have the plain lid. (I used these icons…
Holds Here to slay cards with sleeves & expansions. Extra dice holders. great things to print to store your here to slay expansions, and over all just get more space out of your Box. There has been a request for an updated version and so…
Hello everyone, as many of you out there I'm a Berserk fan and while i was re-reading the manga i just wanted a bookmark that was inspired by the menacing Dragonslayer sword that Guts carries. It's the first time I'm uploading something…
Knight-Slayer from Solo Leveling (Anime) (Sword), modeled by myself (after the reference picture from the Internet). approx. 206mm long (print is 157,76mm x 61,18mm x 5,74mm) prints in 4 pieces, including a connector piece (printed 4…
modeled these up for fun, couldn't fit any rods in it, but if you print them laying down and filament weld them together they should be pretty durable. Split for smaller printers Category: Props
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
This is the last Dragonslayer. He is the only man that dragons are afraid of. It is designed mainly for DLP / SLA printers. The total height is 100mm(gray resin). The size of the skin resin figurine was reduced to 80%. I recommend making…
Update 4: Grouped parts per request, arranged by color, Base and Stand remain single. New articulated figure, this time its Ornstein from Dark Souls! This figure uses the actual game model, downloaded from The Models Resources, most of…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🎉 Hey Adventurer! 🐉⚔🧙 If you love this 3D model – you're just scratching the surface! 🌟 🔥 The full collection from this series (and tons more!) is waiting for you over on my Patreon :…
“ The interior of the cabin is almost entirely bare. The air is stale and musty and the floor and walls are painted in a fine layer of dust. The only furniture of note is a plain wooden table. Perched on that table is a pristine blade.…
A simple remix into a “coin” shape of Ceji3D 's Demon Slayer visualizer model. The model has been scaled up in size from the original, and the text/elements rearranged within so that they stack on top of the "coin" to allow multicolor…
Demon Slayer Hanafuda keychain Print each file separately using the respected color per section. I used superglue to hold the pieces in place, and sanded until flat/smooth. Top ironing, but sanding may be necessary.
My first sword for the LUCKY 13 from soozafon got some download’s and also likes. Thats so awesome and motivates me to design another weapon accessory for it. Here you got a easy print replica of the Dragon Slayer two handed broad sword…
Źródło oznaczyło ten model jako treść 18+.
Remix of Nezuko model with a base on the model to be able to print in two colors
Hey There! Like many others I purchased here to slay and fell in love with it. But also like many others once you buy expansions you quickly realize they no longer fit the original box. What a bummer..... Anyway I decided to take it upon…
Slayer Bust of Doom Dark Ages Video Game to print in one piece. Below are the printing parameters. Thanks for stopping by :) Full Character Link: https://www.printables.com/model/1411392-slayer-of-doom-the-dark-ages-fan-art-print-by-part…
Los archivos son en especial para boquillas 0.2 sin embargo para imprimir con boquilla 0.4 tomar las siguientes indicaciones 2 Perimetro 8% relleno Perimetros 0.33 Perimetros externos 0.33 Relleno solido superior 0.33 Utilizar expansion…
Tengen Uzui Demon Slayer Chop Stick Holder. G-code version includes organic supports. The empty layers warning can be safely ignored it's the tip top of the sword on the last layer. Action Pose can be found here: Tengen Uzui Demon Slayer…
We love Rengoku! 2 versions, with and without eyes and mouth, easy print, nice result!
Based on the guard of Tanjiro's katana from the anime Demon Slayer. Designed to go around a 7-8 mm pencil. Inner diameter is 8 mm. It uses the handle from this design here https://www.thingiverse.com/thing:3639693
I wasn't able to get meeples for Here To Slay, so I modeled my own in fusion after the ones I found online. It includes all meeples, which are base game and the 2 DLC's and the kickstarter dragon exclusive class meeple as well. I scaled…
Nezuko Kamado! Material - PLA.
Simple but very nice print, just print and put Nezuko on the stand
I exported the obj of my character wearing the helmet using the Runelite Model Exporter plugin . After chopping off the rest of my character, I had to make a bunch of edits to the mesh so it could be solid (video games don't require…
This is a digital 3D printable model of Doom Slayer Dark Ages Helmet from DOOM: The Dark Ages . 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) 3MF pre-colored file All cut parts are placed on the…
Inosuke Demon Slayer For all Kimetsu no Yaiba lovers 🐷 How To Print The model is printed with supports and I recommend using support removal tools to make the job easier. Happy Printing And if you want to support me, you can share, like,…
made to be printed on infinante z, will not work on standard machienes, only requires superglue to put together, but alot of it. Print Settings Printer Brand: Creality Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50-100%…
Looking to add some flair to your style with a touch of anime magic? Check out this stunning earring piece inspired by the beloved anime "Demon Slayer" and its protagonist, Tanjiro. Crafted with intricate detail and designed to perfectly…
#December 08, 2021 This is made in the size and dimensions of Guts's sword from the famous manga Berserk. The dimensions are taken from Reddit, source https://i.imgur.com/muzn7bR.jpeg. Reddit post:…
It uses 5 colors so make sure you swap one out during the print if you only have 1 AMS. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSun Black PLA+ Sunlu red PLA+ eSun Yellow PLA+…
Hey all! I've been wanting to print a lifesize wearable Slayer helm from Old School Runescape for some time now but I have only been able to find paid models that I'm not a huge fan of. So I decided to create my own!! This is scaled to my…
3D modeled Funko Pop–style figure of Obanai Iguro from Demon Slayer, with stylized details and signature outfit.
A player board for Slay the Spire board game to help organize your cards, powers and items. This is based on the official mat and some products out there that I didn't think fit what I wanted. Uses…
Just a visualizer from demon slayer. 2 files, stl and 3mf for mmu. With a hole for the magnet.
______________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant…
Just glue the 2 sides together.
WHATS NEEDED: 3x Spools of your choice of filament but i have used ELEGOO White PLA Printing Needs: “Guts_Sword(blade)(8x)” or “Guts_Sword(blade.full)(4x)” "Guts_Sword(hilt.handle)(1x) "Guts_Sword(butt)(1x) "Guts_Sword(tip)(1x) Assembly:…
Combined base for 3 of the Demon Slayer figures from Banpresto Volumes collection. Tried to pose them as close together as possible to create sort of a scene. These are the figures: Inosuke: https://myfigurecollection.net/item/842601…
Goblin Slayer Armor (author Hodgepodge_Foxe)
Inosuke, the masked beast in Demon Slayer welding 2 swords.
katana de tanjiro kamado demon slayer
WOW This is so big… holy sh*t how do you carry that… I wish I had that big… Please show it to me it is so gigantic…. No they arent taking about sword! Or do they? of course they do! they are taking about your gigantic berserk sword…
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
Remember the following text: Inspiration from https://gravcut.com/collections/tout-poduits . I'm not the original creator of this look, but I am the one who converted it to be 3D printed! Enjoy! Category: 2D Art
Tengen Uzui swords for the Dummy 13 Model Scaled to a standard D13 Model (100%). Prints in 2 Parts, no supports required. Glue is optional. All my Dummy 13 BLEACH models can be found here . All my Dummy 13 models can be found here .
Simply use the pause and swap to change filament or use a MMU. Logo, Tanjiro, Nezuko, Zenitsu, Inosuke - https://www.printables.com/model/802274-demon-slayer-keychains
Tanjiro Kamado chibi version, easy print. Check also Nezuko here: https://www.printables.com/model/1249663
A not so little backpack charm I made in art class once. I mean this thing is pretty decently sized, so feel free to size it down if you feel like it. The red parts are quite simply inserted into the design. This includes the model for…
fixed the head from a file that i've found on thingivers
For Slay the Spire: The Board Game. These inserts are for energy tracker, block tracker, and boss health tracker. Aiming for snug fit that will then restrict the movement of the blocks that typically slide freely. Goal is that blocks…
The original box for “Here to Slay” does not fit both expansions. This box fits the game and both expansions fully sleeved. The instructions need to be folded to fit. The lid can be printed with a filament change for the colored text.
Articulated keychain of the dragon slayer sword from Guts (Berserk). Made three verisons, one with a hole to attach to a ring, one with a small ring for keychains and one with a bigger ring to spin it around your finger. Needs small…
Modified logo inside mount to destroy kanji (滅) visible on Demon Slayer's backs
Remix of Nezuko chibi model with a base on the model to be able to print in two colors
13-04-2022 : J'ai ajouté les fichiers avec chaque couleur séparée afin que vous puissiez les imprimer sur une seule imprimante à filament.
The storage in the Slay the Spire Collector's Edition box is pretty solid, but isn't great during actual gameplay. Baggies for saving progress between games isn't very user friendly, the table layout has 10+ stacks of cards at all times…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Tanjiro Kamado magnet. Category: 2D Art
I wanted a little holder for the card rewards so I modeled this. You can grab cards from the top, then put the ones you didn't pick on the bottom easily. I wanna do some for the act cards and the potions/relics as well, but I haven't…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Demon Slayer Hanafuda Cookie Cutter
A small insert for the 2 Dice (Claw dice and normal dice), the Boot and the map tokens (15 normal + 1 flaming elite). It fits under the large health tracker. Printer: Kingroon KP3S Nozzle: 0.4 mm Layerthickness: 0.3 mm
A remix of the Katana Model from @DrunkenGlitch_322183 . It resembles the Swords of the Character Inosuke Hashibira from the popular Manga/Anime Kimetsu No Yaiba / Demon Slayer.
Tanjiro Kamado - Demon Slayer (HueForge) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Dark Gray At layer #17 (1.44mm) swap…
DEMON SLAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Inosuke Hashibira magnet. Category: 2D Art
Been working on this for a while. Split for and ender sized printer. Will take a while to print all parts and as well as a need a substantial amount of filament. Will need 2 .5in by 52 in rods and one 1 .5in by 17in rod. Category: Props
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
The blade has been sliced and has 4mm hole that goes through the blade for reinforcement. Also remove detail from tsuka if you want to wrap it your self Thanks to dylan3dprint for the amazing model Category: Art
Use min 50% infill or light are gonna light through wall I use lights with usb cable for best effect like it's glowing obviously, just round about walls and you are done Maybe you can use lighter and do little burn marks for effect but i…
Created these coasters as a gift for my niece who likes anime. Kimetsu, Tanjiro, Kanao, Zenitsu & Innosuke are included
A slightly modified version of The Last Dragonslayer https://www.printables.com/model/31603-the-last-dragonslayer . There is a different position of the axe and some blood oozing from the arteries of the dragon's head.
Similar model to my card rewards: https://www.printables.com/model/895221-slay-the-spire-the-board-game-card-reward-holder This accommodates sleeved cards.
Inosuke Boar Head Bottle Cap – Demon Slayer Inspired 3D Model This 3D model features the iconic boar head of Inosuke Hashibira from Demon Slayer: Kimetsu no Yaiba , redesigned as a fun and practical bottle stopper ! 🐗 Perfect for fans of…
DEMON SLAYER FANDOM: Add some Demon Slayer flair Category: 2D Art
DEMON LSAYER FANDOM Category: 2D Art
Goblin Slayer breastplate. Includes front back and buckle. Fusion 360 Link (Front): https://a360.co/2Mcl2em Fusion 360 Link (Back): https://a360.co/2JLytR2 Extras Needed: 2 x Parachute Buckle 3/4" Strap Black from Joann Fabrics 8 x ADA…
Character Tanjiro from Demon Slayer welding a sword
This is just a little box for Slay the Spire - The Board Game retail edition if you purchased the metal coins (like me). Let me know if you have any questions or comments. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No…
Make two, glue them together. Different layer heights for color changes.
Insert to fit the base game, plus Warriors & Druids, Berserkers & Necromancers, and the 6-class dice in the drawstring bag.
Modeled this up for fun, all the colors are separated and there is a hole for a 1/2 in rod. Category: Props
