Liczymy pasujące modele…
Lid raisers for the K1 Max help improve the clearance between the drag chain / filament tube and the glass top as Creality have designed it very very tight. The vents allow you to help prevent the temperature becoming too high inside the…
2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…
This is the newly upgraded version of my NATO strap adapter for the Fitbit Air! I’ve completely redesigned it to be slimmer, less bulky, and even more comfortable on the wrist. The best part? It now prints completely support-free! I…
I really liked the original model, but it looked too bulky to me. So I decided to make a lighter version that does not covers the CR-Touch sensor and minimizes the gaps for the 4010 fan bracket.
I liked the design of Nodashi's battery holder, but wanted it to be just a bit slimmer. No supports needed. Printed upright on a Bambu Labs P1P with SUNLU black PLA at 0.2mm with 2 wall loops, 10% gyroid infill. Edit: Updated to v2 so…
Original model were too fragile for me and had a gap on top of my stepper, so I decided to make a stronger and slimmer version. It's a X axis Stepper motor cover that also doubles as toolhead cable clip. There is two versions: - With…
Minimalist Under-Shelf Kitchen Towel Holder A compact kitchen towel holder designed to mount neatly beneath a cabinet or shelf. The system uses two fixed mounting brackets and two removable press-fit stub axles that support the roll and…
Remix of Giedzinksi's Mechanical Dice Box. I had issues with the rails for the doors getting stuck, so I slimmed down the rails to make it smoother.
The coin compartment is removed and the card compartment is 0.5mm slimmer. This is because in the U.S., or at least in my state, driver's licenses are 0.5 thinner than other cards. This means you can use 2 regular cards plus your license…
I am an avid archer, archery-coach and -trainer. I shot many styles of bows (recreational and competitive) but mainly stick to barebow. Wisdom comes with years, I guess ^^ I recently bought a Fairweather Barebow-tab. These are excellent…
I just took off the extra cable tie dows and slimmed it down a bit. Also made it able to be printed without supports. All credit goes to JoaoMRQ.
Had to shave off a little of the original design to fit on my 1990 Ford Mustang GT Vert as my hood prop retainer mounting location is 7.6mm wide and the print came out at around 7.9. Total print height came out at 12.6mm which is what the…
This is a remix of a remix of an extruder cover. I've made it even slimmer to ensure a more accurate fit, the plastic now sits flush against the metal bracket. Thanks to Denys Shevtsov for the great model:…
The original design was amazing, but I required two v-slots to be empty. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: 3D Printer Parts
A thinner alternative to the TPU flexible case for the Pixel 8. Fits slimmer, obscures the speakers less, and is more intuitive with the volume controls. Thanks to the original creator's design, my phone has never been so protected!
The original did not fit in my cardboard tube, so I decreased the outside dimensions a bit. Internals are identical.
I liked the original, but i thought there is room for improvement (at least for my application of it): This remix features: -slimmed down signs and base to save some material and time (also it looks less bulky on the office door).…
phone holder slimmer and doesnt cover screen
Battery Holder - No 9v slots - Double CR3032 capacity - Groove to easier grab CR3032 - slimmer bottom (4mm vs 5mm)
Hello Printables. I'm proud to present a remix to you. The adjustments are minor but I think the improvements are huge. In the pictures you can see that this deck box is slightly smaller than the commonly available “bowled her” cases that…
Slimmer version of OneWheel GT Stand with slot for Hypercharger is a stand with extra flair, and a window for the charging light indicator. Print on a flat side, 6 walls for strength, 15-25% infill.
A slimmer remix of Kingroon KP3S Y Tensioner with M3 nut sockets so it can be used with Kingroon KP3S Compact Slim and Quiet Power Supply mod. I've printed it placing it on the side with slim tree supports. Use knob and idler holder from…
Remixed this remix by Graloth in Tinkercad.
Made the original model a little thinner. Deleted the side features (stylus and antenna holders).
Same as before, but with slimmer size in depth (52mm instead of 92mm) A Remix of those Models: https://www.printables.com/model/392679-an-even-simpler-simple-spool-holder-for-the-p1p-wi…
a less deep version of the gridfinity tweezer rack base. 1.5 grids deep instead of 2. 1.5 base made with the Gridfinity Extended generator: <https://makerworld.com/en/models/481168#profileId-495677> made using Zach Freedman's gridfinity…
This bucket is slimmer and better to prevent hits with the extruder or the plater
A 3D-printable, two-piece case that snugly holds a full 52-card deck in its original packaging. Now slimmer for reduced bulk and optimized to use less filament, the halves slide together via friction and can be locked using a carabiner…
This is the version that is slightly different.
You will need: 4 of 4mm x 13mm x 5mm bearings 2 of M4 x 20mm bolts 1 of M4 x 30mm bolt 3 of M4 nuts 4 of M3 x 16mm bolts 4 of M3 nuts Cork for the coaster (optional) Files from original model. I only uploaded the ones I modified.
I really liked the Portal Bookend design by LukasQ , but I prefer that the bookend part that slips beneath books is a little lower. This keeps the books looking more aligned. This is a very light remix of the original design that makes…
Because of reasons (see why18650.org ) I use my badge without 18650 cells. Yet I use this case. I found out that it's easily modified to make it smaller and flatter so I decided to do just that and share it. It still fits 10mm pouch…
I printed the original model and noticed a collision with the toolhead. I reduced the thickness of the frame connector towards it by 1.5 mm. Works for me quite nice. From the original design: Because it's printed on the side, you need a…
I decided that increasing the base height to fit 3mm thick magnets was too much so I made this slimmer version that is for 8x1.75 or 8x2mm magnets. Note that the magnets will not fit perfectly and so you need to use a small ball of…
Slimmer, Stronger and locking remix of the Clipper keychain by Marekp. Stood the test of driving over with a car and the locking tab still holds up after a year of fidgeting with it. Printed with PLA at 0.2 layer height and 5 walls.
This bucket is slimmer and better to prevent hits with the extruder or the plater
Original model were too fragile for me and had a gap on top of my stepper, so I decided to make a stronger and slimmer version. It's a X axis Stepper motor cover that also doubles as toolhead cable clip. There is two versions: - With…
Slimmer, Stronger and locking remix of the Clipper keychain by Marekp. Stood the test of driving over with a car and the locking tab still holds up after a year of fidgeting with it. Printed with PLA at 0.2 layer height and 5 walls.
I wanted a slimmer storage solution, less bulky and using less filament than those already available. fitting in an existing box was not a consideration as I have many (too many) catan pieces, and I just needed to keep them organized…
![Ender 3 V3 SE left side extruder cover [Slimmer version]](https://media.printables.com/media/prints/971269/images/7410347_da4ef605-918a-418f-90b9-002e96b7009f_7ae78870-48ce-40c0-8370-cbcb26c9f2f1/pxl_20240811_165309816.jpg)
![Ender 3 V3 SE/KE X Axis Stepper cover with cable clip. [Slimmer and stronger] With optional spine cable chain](https://media.printables.com/media/prints/997542/images/7590934_1fce7923-c1f7-4fa5-bd72-395bbf9c98d6_c07266b5-b580-4bab-a593-653b146c3dd0/pxl_20240905_165430364.jpg)
![Ender 3 V3 SE left side extruder cover [Even Slimmer ]](https://media.printables.com/media/prints/8c523949-dc53-467d-861a-46d472074337/images/10030348_b6182e6b-26a2-441d-baa8-2f253d6b246a_9da58801-9d07-4918-b722-90b758bad61e/kep_2025-06-16_103733957.png)
