31 modeli
The Falcon2 Pro laser cutter & engraver is a great machine. But they really botched the bed of the machine – the slats are a horrible, wobbly mess! So any engraving with fast Y-movement will jiggle the workpiece. Especially bad if the…
This works with the official Anti-Vibration Feet to help stabilize the printer. I found with just the official feet the printer was really wobbly. Sometimes the feet would fold over. I printed my set with tpu with 1 layer outside and 10%…
Loved the original frame braces but wanted to keep the two magnets for the door. I also rounded some of the pointy bits to make it easier to print
Spacers that drop in or glue in to the top of the drawer system to prevent other Tough System pieces on top from rocking back and forth. Recommend at least 3 walls, 3 or more top & bottom layers and at least a 50% infill. Wouldn't hurt to…
As I am switching to sidemount diving (from twin backmounted doubles), I now have the old problem of cylinders sliding around in the trunk of the car. I want to protect the cylinders, and my car, and I wanted something that would…
- ugly remix of the corner mounted stabilizers to be compatible with inward facing enclosures - remix of the X rail idler stabilizers to give the belts even more room and be better compatible with F695 bearings (now actually) First…
Update 2022-06-23: V-Core 3.1 Support New rear Stabilizer added to accommodate recent V-Core 3.1 re-design. Left and right could be reused between 3 and 3.1 - just swap them L→R and R→L (3.1 moves linear rails to the back of the front…
I really liked three-spot 's original model - it housed both straight and curved-tip tweezers in a safe way and was pleasant to the eye. Unfortunately, when the tweezers were inserted in a hurry, the holder often toppled. To quickly fix…
I like the metal shelves that come with wall control kits like this one , because they hold a lot more weight than you'd normally get with other options. However, these shelving units have an annoying design flaw: Unlike most wall control…
I mounted a monitor into my Playseat Trophy using a monitor arm ( Reddit post ). It worked quite well but the monitor would wobble significantly when turning the wheel suddenly. I designed these stabilizers so the monitor can rest on top…
This is a surfboard that rides the wind. You attach a fishing line or thin string to the ring and the surfboard then put the ring on your pinky and surf outside the car window. The Rings are Ring-Large 15mm pinky diameter and Ring-Small…
Flute stabilizers for common flute pad sizes. they can help create a flat surface for padding on a flute. They make the process easier and more consistent. I recommend petg for fdm printing or sla printing for better dimensional accuracy.…
Remix of the Sick68 keyboard case by FedorSosnin on thingiverse. Cherry style stabilizer mount remix by spv_one on thingiverse. I've changed the lower left part of the case so there's more room to fit a teensy inside, as my test prints…
remixed scuba tank wedges with open honeycomb holes
I modeled these stabilizers for my Chiron printer. The files are 3 and must be mirrored to have the complete set. You lose a bit in print volume height but it's something like 5-6cm. Two iron or better steel pipes of at least 65cm with a…
Adapter for small stabilizers s376/s400/s399 of sabfoil
Remix of FLSUN QQ-S - Rod Stabilizers Added a slot for the timing belts so I wouldn't need to take the entire thing apart again... Print Settings Printer: FLSUN QQ-S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.16 Infill:…
Ritewing Mini Drak Vertical Vertical Stabilizers Skids Designed to fit Ritewing Mini Drak. Provides protection and increased skidding performance.... Recommended print materials: PLA+. PETG. ABS. Print orientation File is oriented…
I picked up a 2.5kg filament spool, which arrived with a 100mm-wide spool. My original TUSH++ stabilizers didn't have the width to accommodate this size, so I needed to print longer stabilizers to fit the wider spool. Rather than just…
Print in TPU, I recommend at least 4 walls and 4/5 top/bottom layers depending on your layer height. These are printed at 60% grid infill and have been holding up for almost 3 years now
Update 2022-05-04: Since, the old version was bit flimsy I made a thicker version. So far, they perform much better than the older version. See the download are for the newer versions (labeled as “thicc ed.”)…
Christmas Tree Stand Stabilizers by RebelTaz Every year when we go to our local tree farm, invariably the tree that we choose to cut down will always be too small in diameter to fit safely in our tree stand. Last year, I told my…
Kinda specific model for people who printed one of the 2040 prusa frames. Stabilizes the 2040 extrusions from twisting and bowing. Also has super basic feet to rise the printer.
This is a set of stabilizers for the Geeetech A20M for use during/after conversion to KevinAKASam's Belted Z mod. It is intended that for one of the stabilizers you use the 355MM leadscrew as part of the stabilizer, while the other…
When the baby gets bigger and starts to pull itself up on the LEKA it is prone to tilt. Less so with those. Push onto the wooden foot. Secure by inserting the “riegel" (pin). For the opposite side just mirror in the slicer.
Z bar stabilizers for Printrbot LC v1 Category: 3D Printer Parts
these are stabilizers for a brio train track lift that i designed, they are smaller than the original ones, so they only work with the train track lifts i designed.
After using my other cigarette case designs for awhile, I decided to remake them with a different closure. Made to hold 18 king sized cigarettes for ryo enthusiasts. Flip top lid that is attached with a 55mm length of filament so no…
This is a set of stabilizers for the Geeetech A20M for use during/after conversion to KevinAKASam's Belted Z mod. It is intended that for one of the stabilizers you use the 355MM leadscrew as part of the stabilizer, while the other…
remixed scuba tank wedges with open honeycomb holes
This may be a very niche print but I put the effort into making it so I'm sharing the design. I have a bunch of Knape & Vogt shelving in my office and the pine shelves float on the shelf brackets. I wanted a way to stabilize the shelves…
![Idler stabilizers for TwoTrees Sapphire Plus SP-5 [REMIX]](https://media.printables.com/media/prints/533794/images/4307696_505d4727-863b-4afe-957e-dd1acbb8e110/screenshot-2023-07-23-090432.png)
