Liczymy pasujące modele…
Description The T250 is a next-generation, high-performance 3D printer built from the ground up for speed, reliability, and print quality. With verified real-world acceleration of up to 250,000 mm/s² and sustained print speeds exceeding…
Replacement vent for the Yamaha Enticer 250 snowmobile hood vent. will need some supports. Mine was printed in PETG. You will need 2 small machine screws or bolts with nuts to install
Das ist ein Nachbau vom Hornet250 der von Mimic UG gemacht wurde. Leider gibt es die Hersteller nicht mehr und der Frame wird auch nicht mehr hergestellt, also hab ich einen Nachbau davon angefertigt. Der Frame unterstützt 16x16 bis 32x32…
I initially started designing my own 200x200x370mm version of this but then came across 3DCatts SFF Mini ITX Steam Machine Case v2 Airflow and they had nailed the design and was only a few centimetres bigger than the design I was working…
Wall mount bracket specifically for the Ego HT2500 hedge trimmer. Please mount it to a solid board. Printed in Galaxy Black ABS with 3 walls, 4 top/bottom layers, and 15% infill.
First of all, a big thank you to Matt for the outstanding development work on the world's fastest printer (accelerated by Volgger to WR), the T250. On the T250, the four legs are so high that not everyone can print them. I split the legs,…
Includes: Rear Hatch with a slot for the TBS Unify Pro32 HV and an MMCX 90 degree Antenna, such as the Foxeer Lollipop 20x20 M3 glue- (or velcro-)on stack mount (I use a Matek H743-mini V3) 14mm camera canopy (tested with the Caddx Ant)…
Print settings: Nozzle- 0,4mm Filament- PETG Infill- 99 percent Wall line count- 7 I printed the model with 7 outer walls, and at an angle with supports, to ensure better strength. I modelled it in Inventor Autodesk, the measurements…
The GPS bounced around in my vehicle, so I made this case to fix it on a vehicle wall. The magnetic charger cable can be connected below. Print instructions You might need support for the top opening.
First of all, thank you for clicking on and maybe printing my model :D Case and lid for remington BHT250 Print settings: Speed: depends on printer Infill: 5-100% Number of walls: at least 2 Retraction: depends on printer Have fun printing…
Wanted to create my own design, cause all I found was not stable enough and therefore I don't wanted to cut a hole in my Dart250 cover. My version does not really differ from others, but has a collar at the edge to fit better. This is…
Needed an antenna mount, due to the fact that I was not able to get the long Antenna or an extension. So I designed this little mount. You will need a hole for the Antenna cable and two holes for the guide pins. Glue them to the case,…
Replacement for a missing knob. Print Settings Printer Brand: Anet Printer: A6 Resolution: 0.1 Infill: 100% Filament: various PLA 1st white, 2nd black Category: Music
I modelled this in fusion 360, because it broke on my car print settings Nozzle: 0,4 Filament: PETG Infill: 99 The inside might need som filing or sanding
Mount for the ZOHD Dart250g to carry both an FPV cam and the Insta360 SMO 4K cam on the nose of the aircraft. SMO cam mounts with an M3 bolt and nut. Removable even if camera mount is glued to the aircraft. FPV cam mounts with normal…
Passen bestimmt auch für viele andere Modelle. Ich habe es nur gedruckt, aber mir wurde gesagt es soll prima passen und lässt sich trotzdem gut überschieben. Gedruckt aus schwarzem TPU mit 50% - 100% Infill
Replacement for Yamaha snowmobile kill switch. Must print in TPU so it is flexible enough. I printed at 40% infill.
Replacement threaded clip for the Chevrolet Aveo T250. I've destroyed that clip while removing the side plastic trim to access the C213 connector. I recommend printing in PETG due to high summer temperatures. I printed this using 0.3mm…
plug with wire holder for plotter HP T2500
"Introducing a sleek, minimalist solution to keep your Eufy Homevac S11 battery (model T2501) organized and accessible! This versatile holder is designed to be easily mounted on both pegboards and walls, providing a perfect spot for your…
I designed these after a I bought a server with no drives and there was no way to get empty drive holders.
ORGANIZZATORE GT250 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
It's just a simple strip based on the profile of the LED slots on the T250. 265mm for the sides 225mm for the front I used clear ABS. You might want to play with the thickness depending on your filament, how much you want to diffuse, and…
Just a simple mount for a small USB camera, designed to place the nozzle top-centre and maximise the print view. It screws in place through original holes below the motor tower, you'll need 2 X 20mm SHCS.
Just a taller clamp for the CPAP hose where it meets the toolhead. It has notches for cable ties to secure wires, as well as being taller to prevent droopy CPAP hose syndrome. Uses original screws.
This is a basket holder with a mesh for catching paper from the HP T2500 printer. Printed from Hyper ABS filament.
porte filtre pour moto Yamaha XT250 de 1986 imprimer en Nylon pour resister a l'essence et huile
I made a few small mods that others might also need... LED strip holder - the 10 mm wide LED strip is inserted and not glued, holds securely. Feet without tip and with cutout for 8 mm truck anti-slip rubber. 18 mm spacer for standard…
Wall mount bracket specifically for the Ego HT2500 hedge trimmer. Please mount it to a solid board. Printed in Galaxy Black ABS with 3 walls, 4 top/bottom layers, and 15% infill.
