Liczymy pasujące modele…
Find out everything you need to know about the STC controller on my blog: https://nerd-corner.com/stc-3000-with-user-manual/ https://nerd-corner.com/stc-3008-2-temperature-sensors-in-one-device-full-user-guide/ 3D-Model STC3008 from…
If you bought this cooler before AM4 was invented, these 2 parts are the solution, to be able to mount on an AM4 motherboard. Reuse 4 screws from coolers AMD kit, and add 2 M3x16mm screws and 2 locknuts. Printed in PETG 100% filling, and…
Model and G code for these handy castor cups for the TC100 gaming chair or any other chair with 66mm dia x 55mm wide castors. Great for stopping your gaming chair sliding around on laminate floor. You can also add some non slip mat…
Wall mount for Black&Decker STC1840EPC The wall mount is in 2 parts (one for each handle) and 3 washers. There are 3 conical washers to prevent cracking of PETG when tightening the screw
Be sure to add a few extra perimimeters to ensure it's strong enough. I've used 3 perimiters on a 0.4 nozzle and it held up fine, should probably use 4 just to be safe though. The mount is for horizontal mounting only. If the cooler is…
For those, who wants housing blank (without logo).
I wanted a case for this boost converter: https://a.co/d/hFepbhh Didn't find one, so I made one. Very simple, <30 minute print on Bambu X1C printed in PLA. I used 0.2mm layer height, 10% gyroid infill, 2 walls; but I'm sure any normal…
The most recent (July 2023) iteration of the couplings used on my models. As close to NEM standards as can be achieved.
An addon base to fit a boost converter to power the fans in a BentoBox. Has slots for a power switch and a barrel jack. Supports 4x2mm magnets, like on the original BentoBox. This was made to fit in a Bambu Labs P1S using the inner 5V…
This will allow you to mount the MTC10 on an AMPS mount (screws down from the device side) It also has a hinge to allow for proper tilting. You will also need: 4 pcs M3x12 screws 4 pcs M3 washer 4 pcs M3 spring washer (grover) 1 pcs M4…
Centerlock style hubcap that i designed for my specific rims , That is 15x7jj TC105X ET 35. Not sure if this would fit into any other rims but if your center hole is 61mm , The hub part should fit snugly without any modification /…
DESCRIPTION Remix of : Blank Insert Reinforced Lids by ImprovedByDesign Tool Holder For Multi-function Tester - TC1 Compatibility: Compatible with size 2x3x6+ Double Lip Corrugated Gridfinity Light Bins and the original Corrugated…
This is a box for an STC1000 thermostat ( such as this one ), large enough to accomodate a British/Irish 1-gang BS1363 socket outlet ( like this one ). Additionally, it has 2 holes for M16 cable glands . You will need a few M3x6 threaded…
Created by subtracting the Outline of the TC1 form a standrad GF-block. I also added a pouch for the cable-stuff that came with the tester (although these testing cables are really poor quality)
Want to get a feel for the TC15 before you buy one? Or do you want to design an accessory for it, but don't want to spend hours making a CAD model of it like I did? This is a scale model of the TC15, as accurate as my calipers can measure…
I want to add a power button to the TC1 Component Tester to completely power OFF the device when not in use, as it always goes into sleep mode, so it continues to drain the battery when it is off. These Covers are designed to fulfill my…
The LTC1871 is a simple boost converter ex Ali Express that needs a case. I use mine to power a 19 volt laptop from a 12 volt supply. The case uses 2mm diameter screws to hold the lid on, and cable ties pushed around a "horse shoe shaped…
The wall bracket can be mounted using screws, nails, or double-sided tape. If you have any suggestions or requests for updates, feel free to share them—I’d love to hear your feedback! This bracket is designed specifically for the…
Dial Indicator for a Crouzet Valence TC125 - 3D printable The dial indicator can be used on a Crouzet Valence TC125 lathe. It is used to reengage the thread cut leaver of the saddle to the lead screw when cutting threads. This makes it…
Snap-fit enclosure for LTC1871 power converter with wire guide option
DPC-TC1 is the case for the SmartTabUI pendant , a wired hand-held controller for CNC routers, lasers and plasma tables running dpCREATOR FluidNC. It’s built around familiar, low-cost parts: 2.8″ ESP32 touch display (JC2432W328C): the…
This will allow you to mount the MTC10 on an AMPS mount (screws down from the device side) It also has a hinge to allow for proper tilting. You will also need: 4 pcs M3x12 screws 4 pcs M3 washer 4 pcs M3 spring washer (grover) 1 pcs M4…
Not my design, just a remix. Design is made to Store the TC-1 on the HSW system.
A plate for the topside of the tester to add a small slide switch, this let you completely disconnect the battery when not in use to prevent accidental power on and battery drain when stored. The pins sticking out on the inside are…
TC1 electronics tester holder for Skådis. I used 4 parameters, 25% infill and no supports required. Small box side by side for usb and testcables.
Organize your lab bench with this Skadis Multi-Function Tester TC1 Holder Multi-Function Tester: https://s.click.aliexpress.com/e/_m0qXsrl
Wall mount for the Mellif Charger MTC182 (for Makita style batteries). I decided to split the model into two parts, for easier printing (no supports) and increased strength. I printed mine in PETG with 0,6 nozzle, 2 walls, 15% infill.
Needed a red filter for my TC15. This is thinner at the front than the walls, so more light will be directed forwards. Works as a decent diffuser, but won't have as good a distribution as a conical design.. DO NOT USE TURBO OR HIGH MODE.…
Quick mount for TC100 Camera. Gently remove post and base. Use velcro or double sided sticky tape to affix to window
Just a quickie today, chaps and chapettes. I recently acquired a TC1 component tester. It's a dandy little update of the LCR-T4 thingy. Slightly smaller, and with a colourful OLED screen. But still basically the same thing that's been…
