48 modeli
The model uses a 8x3mm Magnet for the mic mount, 10mm m3 screw, m3 hex nut and a 2.5 to 3.5mm jack. Jack - https://www.aliexpress.com/item/1005006194351413.html?spm=a2g0o.order_list.order_list_main.12.7bb91802MsqEWi
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The on/off switch on the Bose QuietComfort 35 has been known to break after a bit of use. I've had my headphones for 4 years, and previously was able to superglue the broke switch back together the 1st time it broke, but this time I had…
A humorous alien figurine inspired by the iconic alien character from the classic 1980s TV sitcom ALF.
This is a printable model of a FMC [ en / de ] for Boing 737NG. Original size of 225x150. The display is a 5.0" TFT panel. Ideal for a home cockpit and flight simulator or as a control panel. Buttons: Taster9308 [ PDF ] Display: 5.0"…
Uses this connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
My quick-and-dirty modification of Big Clive's customizable battery trays - holds 16 AA and 15 AAA batteries OR 20 AA and 18 AAA batteries. Watch his video here, original OpenSCAD code is in the description:…
An overengineered holder for screwdriver bits.
1:200 Airbus A320 Family Satcom Some model airplanes don't have a satcom antenna while real airplanes have one. This satcom is not 100% accurate to the real one.
Uses this 90 degree connector: https://www.amazon.com/gp/product/B078M793HW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
these are some of the first models I've ever made. there are stl and 3mf files I got survivor icon and there last life and dead icon, there is also the killers icon. I'm hoping I set them up right.
Printer - Bambulab P1P Material - recomended PETG Support - yes Infil - 20%
I made 2 version of intercom handle In the future I plan to add also version with clips (it was included with genuine intercom). You can print it with use of pet-g to make it more flexible or even tpu. Supports are needed //edit there are…
I don't like things in my pockets, exspecially large earphone pases. The case has holes built into it for the USB Ccharging port and the reset button. Use double sided tape on the front and back of the case to hold it inside the holder.
The cushions on the Bose QuietComfort headphones weren't thick enough to prevent my ears from pushing up against the internals, leading to pain after a few hours of wear. These extensions provide a little more room to prevent that…
This is a stand for the Bose QuietComfort 35 headphones. It is composed of three pieces that are kept together by gravity and friction. If your printer is not well calibrated and the pieces are too loose, just add a drop of glue. No…
2x2 - Gridfinity - Bose Quietcomfort 2 Holder. Includes a little finger notch to pull it out easier. Category: Other
A cable management for Bose QuietComfort 20 for easy carry everyday. Print instructions Category: Audio Print Settings Rafts: Doesn't Matter Supports: No Infill: 50%
Bonjour, Suite à la casse de la petite pince permettant de fixer mon intercom moto sur mon casque, j'ai modélisé cette dernière pour la remplacer. L'intercom est le TCOM-SC de chez Aliexpress (très bon intercom pas cher et que j'utilise…
This model was specifically sized for a Vention 3.5 to 2.5 female to male jack adapter [1]. The BoomPro and the jack adapter slides into the printed part and they lock securely on their own. The whole assembly then can be easily plugged…
Für den beleibten Zyklon habe ich einen Aufsteckadapter entwickelt welche ein Unterdruck Ventile von Dusk Comander hat.
Details for manufacturing a satellite reception antenna. Use a 16mm ruler as a vibrator. The antenna does not involve transmission, you take all the risks on yourself.
An enclosure to house ESP3266, MOSFET Power Switch Module and USB Socket. Power is remotely controlled via WiFi using the Blynk IOT platform. Super-computer: https://www.bigclive.com/freebies.htm A4Gallium.zip MOSFET Power Switch module:…
This is a model optimized for 3D printing, 245 and 205 mm sawblade compartments, the depth has been increased by 5 mm to store tall sawblades For greater durability of the hinges and latch attachment in the slicer, you can add modifiers…
My research focuses on the innovative technique of mixing filaments to create composite materials for 3D printing. This method allows for the customization of filaments not only in color but also in electromagnetic properties. Key…
Boom mic adapter for Bose QC45. Can be printed without supports. I used PLA with a 0.12mm layer height. This is a remix model of dr_traktor's Bose QuietComfort 35 adapter for V-MODA BoomPro Microphone . The adapter was shortened to fit a…
No supports required. Print right side up. 2mm hole for fuel.
This is a simple stand for the Bose QuietComfort Ultra earbuds. It features a channel at the bottom, that allows the case to be charged. For that you need a angled USB cable, i am using a magnetic one with a hinge (…
Voltcom replica from Voltron from available photos. I didn't know how to make the bottom of the object, so maybe you can handle it yourself.
Customized version of http://www.thingiverse.com/thing:1571860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1571860 Instructions Using the following options: Nozzle_Length = 60 Base_Diameter = 34.6…
Description This retaining ring allows Bose's replacement ear cushions for the QC15 model to be used with the original Bose QuietComfort model QC-1 noise cancelling headphones. The ear cushions are, of course, a wear item and on a headset…
Bose QuietComfort 35 custom ear cups. Since the old covers were quite worn out and I simply didn't like the gray anymore, I'm glad to be able to print my own now. They should also fit the version II . Please give me a message to confirm.…
I designed this in TinkerCad using the drawing "Voltcoms as Bracelets" from a Voltron TV show frame. See: https://voltron.fandom.com/wiki/Voltcom This model was originally requested by another Printable user:…
These are parts to support the LCD and button board of an UTComp Pro 3.2" LCD and button board, inside the official available case. There's nothing that supports the LCD or button board in place, so these pieces are designed to hold those…
I was repairing my headphones and lost the switch. Could not be bothered searching for it, Im sure the original will pop up. STL is not perfect but it works. I did file the top surface for smooth operation, I did shave off some of the…
I designed this to diffuse some clear colour changing LEDs I used in one of Big Clive's “Gallium” 6x4" super computer boards (available to download at https://bigclive.com/freebies.htm - circuit board manufactured by who you choose) The…
Wall mount for Bose Quietcomfort Volume controls. Use mounting tape or command strips to mount it :)
A wall mount for a wall mount for a Netcomm Wifi 6 CloudMesh Gateway , a standard router provided by several ISP. Hole Spacing for the screws / Nails in the wall is 123mm ( Same spacing as a TPlink Archer 1200 my last router)
IBC Insert for Reduction to Plastic Tube This IBC insert adapter enables a secure and efficient transition from an Intermediate Bulk Container (IBC) outlet to a plastic tubing system. Designed for leak-proof fluid transfer , it reduces…
I often use the party plugs from Alpine as hearing protection for nearly every loud event / action. With these i got one pair of these plugs always on baord with my bose :)! Protect your hearing ability =)!
After printing the original extension, I found the fit to be too loose. It could be snapped in, but would rattle around and did not provide an effective audio seal. This gasket must be printed in TPU or some other flexible material. I…
my ears are big (i guess?} and the bose ear pads are tiny, this adapter lets you use DT770 (and probably many more) ear pads on your bose QC 45, probably fits other QuietComfort head phones as well! i bought these ear pads:…
Boom mic adapter for Bose QC45. Can be printed without supports. I used PLA with a 0.12mm layer height. This is a remix model of dr_traktor's Bose QuietComfort 35 adapter for V-MODA BoomPro Microphone . The adapter was shortened to fit a…
A humorous alien figurine inspired by the iconic alien character from the classic 1980s TV sitcom ALF.
This is a model optimized for 3D printing, 245 and 205 mm sawblade compartments, the depth has been increased by 5 mm to store tall sawblades For greater durability of the hinges and latch attachment in the slicer, you can add modifiers…
This is a simple stand for the Bose QuietComfort Ultra earbuds. It features a channel at the bottom, that allows the case to be charged. For that you need a angled USB cable, i am using a magnetic one with a hinge (…
![[TPU] Gasket for Earcup Extension on Bose QuietComfort](https://media.printables.com/media/prints/97f392cb-de77-4f09-a0bb-f69d2761da7b/images/13845428_cf9b9826-fd69-49fc-8594-e5d5c303685e_167b139b-377e-4518-8da1-ee9ca03d3ffc/img_3775.jpeg)
