Liczymy pasujące modele…
Mythosaur Skull from Star Wars, Printed On Bambu lab X1C. Scaled to fit 256x256mm build plate Used .08 Layer height no supports needed. If using .2 layer height supports recommended. . . This is the way
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Depending on the resolution you print you may need some supports. I printed it with a 0.4mm nozzle and 0.125mm layer height and didn't need any supports
This is a digital 3D printable model of Bo-Katan's Mythosaur Sigil Emblem from the Mandalorian series. In season 3, Bo-Katan receives a new shoulder armor with the Mythosaur head sigil. The new shoulder armor STL is a part of the "armor"…
Ofcourse being a big star wars fan. the Mandalorain is going to be right up there. I always wanted to do a really cool Mythosaur, but my skulpting skills are still very limited. I found this amazing model done by KirkieballCanada and was…
Thanks @CalebTimoteo for the cool idea! Print settings: PETG, PLA Nozzle 0,4-0,8mm Layer 0,2mm for best details! Supports needed.
Mandalorian Mythosaur Stencil for spraypainting or airbrushing. If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
A Mythosaur skull necklace from The Mandalorian
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 45° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Super sized version of the Mandalorian Mythosaur. In Honor of The Mandalorian season finale... Here is a supersized Mandalorian Mythosaur for ender 5 [550mm] and ender 3 [~400mm]... Lays flat and perfect for hanging on a door or walls.…
Mandalorian inspired screw lid pencil case with Mythosaur Skull art. Check out my other models here 👀 See my other Mando models here 👀 Hope you enjoy and happy gardening😎
Update 230728 - Had to beef up the connection between the receiver and the head, I again had it break from the car-wash. I may just have to start removing it before going through the wash. Remixed a Mandalorian Mythosaur model found on…
Mythosaur Skull Magnet for your fridge, door, fridge door, cubicle cabinet, or other magnetic metals. Printed at 0.05 ULTRADETAIL. Paused at 3.15 mm (layer 60) to add the magnet. Link to magnets used for this model:…
"We must walk the way together" - The Armorer Happy May the Fourth! This keychain print was a part of my metalized filament testing. I printed all of these keychains with Protopasta's metal-filled filament. I followed the tutorial on…
This fan-made coin token features the iconic Mythosaur skull - symbol of Star Wars Mandalorian heritage. Use it as an in-game token, gift, cosplay accessory, or collectible. Whether you're settling debts in a tabletop RPG or paying…
A fun little container, tip jar or other fun for your star wars collection. I use mine to store jumper wires but you can use it for anything! Scale in the slicer for whatever size you want! I originally built this to hold some jumper…
Mandalorian Mythosaur Skull bookmark
Scientifically accurate model of an arocanthosaurus. The model features detailed scale/skin texturing along the model. I created two variants of the model, standing and walking. I recommend printing it at a finer layer height or with a…
I designed this in Fusion 360 and used the Bambu Slicer to paint it. I printed it on the Bambu Lab X1C with a 0.2mm nozzle at 0.10mm Layer Height, Bambu Textured PEI Plate, and Bambu White PLA and Bambu Black PLA Matte. I haven't tested…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
1:15 Scale model of a nothosaurus. The model features detailed scale and skin texturing along the model. I created two variants of the model: idle, and swimming. I recommend printing it at a finer layer height or with a resin printer. The…
Printed .20 layer height no supports. Printed with 40% in fill to make it more durable.
Hello everyone, This is my design for a Corythosaurus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
Basically a Mythosaur keychain. Feel free to post a make if you printed it :)
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Awesome Mythosaur Koozie I found on Thingiverse. Turtleoxide did a great job! Reuploading here so it's available to people. I take no credit for anything to do with this model. Just adding here.
FOR 3D PRINTING ONLY Scientifically accurate Corythosaurus casuarias figurine, sculpted in NoMad Sculpt, touched up and rigged in Blender. This figurine has a lot of polygons and details so I really recommend using Resin Printer when 3D…
i liked the newer design, so i made this stl and kind of a bracelet, i dont know what to call it, so sorry for poor english Category: Props
Mythosaur keychain :D Category: 3D Printing
Mythosaur Magnet. Modeled for 6x2mm magnets. 3MF File is set up for Bambu Lab P1P/P1S with AMS I have included the .step file if you would like to change the magnet size and scale it up or down.
- Fan Art - Stencil of the Mandalorian Crest from Star Wars to decorate your wall. Just hang it on a nail. Print & Scaling Tips: Optimized height: 1.4 mm (7 layers at 0.2 mm layer height). Scaling: You can scale the stencil as needed, but…
Mandalorian Mythosaur Hitch Cover for 2" Receiver. Designed to fit 2" receivers. Was specifically tested and fits perfectly inside the hitch on my Super Duty that has a 2.5" to 2" adapter it. Printed in PETG use Bambu X1C with AMS…
Halloween Mando pumpkin tealight candle with Mythosaur skull art on the opposite side and a light diffuser. Looks good with or without an electric tealight candle. Use the optional (recommended) light diffuser if you want to create…
North American Hadrosaurid with ontogeny described in the same paper as Gryposaurus in 2023.
Printed with .32 Layer Height with filament change at layer 30
Llavero y collar del Mythosaurio de la serie the mandalorian de la franquicia Star Wars
basic knife with a mythosaur twist great for your custom mando must print twice and glue the halves together to make a complete knife also suggest printing with gyroid and at 20% infill for strength modified to be more symmetrical for a…
Mandalorian Mythosaur skull as a 60mm bag tag that can be printed in different color heights. Could be scaled if needed along both the X & Y axis while keeping the Z axis as the original height. Check out my other models here 👀 See my…
this is a remix of an existing mythosaur model from a different website. i modified it using blender. i made it so that a dark saber can be inserted from the top. this is a wall hanging mount specifically for a dark saber. the larger…
This is a spinning keychain of the popular symbol from the Starwars universe, the Mythosaur skull A great way to show your allegiance to the Mandalorians
This keychain features the legendary Mythosaur skull symbol, a sacred emblem of Mandalorian culture and strength. Designed with a built-in loop for keyring or cosplay use. A perfect accessory for Mandalorian fans and those who walk the Way.
This is an insert of the Mandalorian Mythosaur you can use with the Reflection Stand System Core or any of its components. If you would like to request an insert design, leg design, etc. you can do that through my community discord…
This bookmark features the legendary Mythosaur skull — a symbol of Mandalorian strength and tradition. Printed in a layered, two-color design, it adds bold galactic flair to any book, journal, or lore-filled datapad. Built tough for true…
Decoration for top v-slot on ender 3. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Filament: polymaker polyterra PLA Notes: -I did a fillament change at layer 29 to hide the part that…
key chain easy print for Mando fans
Záložka do knihy s motivem Mythosaur.
Corsair AIO Capswap with Mythosaur logo If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing… [Description may include Reflinks]
Mythosaurus Mandalorian Mando Magnet 2x - 8x2 magnet
Revision of my Corythosaurus model.
Haplocanthosaurus is a 3d printable model of a real prehistoric dinosaur for display, education, and collecting. This stl is great for dinosaur lovers, classroom learning, tabletop dioramas, and paleo art projects where you want an…
Hello everyone, This is my design for a Corythosaurus statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!
Printed with .32 Layer Height with filament change at layer 30
The files include: - Assembled Skull Version - 4 Skull Base Alternates: Solid, Hollow, Wall Mount Solid, and Wall Mount Hollow - Bambu Studio Project files for Wall Mount and Regular versions - Pre-separated into 10 keyed parts for easy…
the metriacanthosaurus is the dinosaur with yellow stripes and comes from the game called jurassic world evolution
