59 modeli
Hey! This is a replacement cap for the standard Kuru Toga mechanical pencil. I lost mine shortly after buying the pen, so I had to print one in order to protect the eraser in the back end. The cap was designed in OpenSCAD. Use the caps to…
This 3D model represents Julius Caesar depicted as a classical Roman bust , wearing a traditional toga . It’s designed as a decorative and educational model , ideal for display, study, or historical projects . The bust focuses on…
I printed this at .05 layer height and 100% infill with “Detect thin walls” enabled and seams aligned. Still needed a bit of sanding to get the perfect fit.
himiko toga my hero academia - wall art
This is a remix based on: https://www.thingiverse.com/thing:3827782 The new mounts are completely designed by myself to be compatible with the original release which looks to have been abandoned by the designer. (No replies to comments…
This is the back cap (goes over the eraser) for the uni KURU TOGA ELITE mechanical pencil.
Needs some post print tinkering, file the back of the part to fit the clip, as I am not sure how to model it :P Quick sketch I made as the shell on mine broke, open to any feedback, good or bad. 0.15-0.2 should be a good layer height.…
Everything you need for good design is a pencil and a piece of paper. So whenever I have an idea I do a lot of sketching. For this I love my Kuru Toga pencil and I keep it right next to my sketchbook, wherever I go. But it's tip is very…
Shine on your next toga party with this unique accessory pin! Not only it looks great, it works great as well: Securely hold both ends of a standard bed sheet! No security pins required! Adjust the length of your toga on the fly! Shine…
A simple cap (Tomasetto Dish, M10 screw) for those people that have lost their original ones, in two versions, with or without letters. Please print using a material resistant to high temperatures such as ABS or ASA. Suggested leayer…
statue of an alien in a toga and Greek style
This is a replacement cap for the Uni Kuru Toga eraser, in case someone misplaced it. The fit is quite precise, you will most likely need to tweak a few things, mostly X-Y Hole compensation. There are 3 variations : One with looser…
The Model is 180.08x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA eSun…
Dust Cap Fuel Cover Lid for autogas - GPL - LPG Filling Point. Use the spring from old cover and place that in this one after print! I made this one because the standard one fitting is sometimes too tight. print without support.
This cap will work with all Uni-ball Kurutoga () mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the…
print vertically, add brim if adhesion is not good and add fuzzy skin for grip https://cad.onshape.com/documents/d13e39564e0e5b00e78305cb/w/f8b8dd963e65954e513ddbf3/e/a93d04841e1c90d440275294?renderMode=0&uiState=6931d79bbd5a372fec2da91d
Replacement cap for Kuru Toga mechanical pencil.
I needed a lid for my pencil and maybe someone finds a use to it, too! I held the design minimal, only used chamfer like the pencil itself. I've uploaded two versions, an easy fit which has a higher tolerance and a snuck fit version wich…
This part is supposed to be put between the bar ends and the handguards so you can mount bar end mirrors to the bike
A friction fit cap for a Kuru Toga Metal
The piano mini game in FF7 Rebirth has hurt me enough so I have to create this gate to make accurate analog stick inputs. This is a quick hack rather than a permanent solution. Simple print. Figure out your own way to make the rings go…
This is a box for the Uni Kuru Toga Standard (model M5-450T) , with space for one or three additional Uni graphite refill packages. The refills I used are from Uni, model number UL-1405, size 67x13,5x6,8mm The base has a place for…
Himiko was a fair-skinned girl who was prone to blushing and was frequently described as having a pretty face. She had inward-tilting yellow eyes with thin slit-like irises, somewhat resembling those of a cat, and her wide mouth was also…
Flip the model upside down and insert
replacement eraser cap I made for the Uniball Kuru Toga Elite mechanical pencil because I lost the original one
statue of an alien in a toga and Greek style
DIY photogate for physics teaching. Important Specifications: The screw fitting is designed for standard ¼' nuts. The sensor fittings are designed for 5mm encapsulations. Future Adjustments: ESP32 as a WebServer, eliminating the need for…
Remix of K73TXT's cap. I love the pencil but the tiny eraser always had me reaching for other writing utensils. With this adapter, you can use the erasers with cheap BIC-type pencils to expand your eraser capacity. The original eraser can…
This is a print-in-place design for the Kuru Toga pencil. I loved the pencil, but the stock eraser sucked. This is a drop-in replacement that is compatible with the Papermate jumbo eraser or a standard pencil eraser and has a similar…
Our new product is an adaptation for GoPro boxes, specially designed for LPG adapters. To ensure that the print bed pattern is visible on the top, the part was printed in two parts and then connected using a connector. Alternatively, the…
Detailed 3D printable Chibi Toga Himiko From My Hero Academia With Knife And Syringe figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
modified file adding rectangular slot for a toga.
I made this model because i used up the eraser and wanted something to cover up the hole with. I needed something so the graphite rods don't slide in and out of the holder.
A clamp to hold the photogate on the older PASCO air tracks. (Black plastic end caps) Students would bump into the photogates on the stands and have to reset the positions. The clamp secures the photogate to the air track. I used nylon…
A finely detailed bust sculpture depicting a young man in classical Roman style, wearing a draped toga and featuring tightly curled hair in the tradition of ancient Greco-Roman portraiture. The piece is finished in a soft, marble-like…
This is a photogate mounting bracket that aligns the photogate IR detectors with the center of launch for the PASCO mini launcher. ¼" holes and registration nubs are designed to hold the plate in place and secure using a square nut inside…
This is a model of the Saratoga Springs Temple that has been hollowed and has space for a small battery powered tea light inside. I cut holes through the model where the windows go so light can escape it more freely. This model will need…
The Seimitsu LS-56 is one of my favorite joystick levers of all time. Comes standard with a square gate, but depending on your preference you might like an Octo gate more as they allow you to easily identify corners when moving the lever…
An organizer I made to hold my 2 uniball™ Kuru Toga mechanical pencils with spots for both sizes of lead holders and the erasers.
A stand designed to hold the uniball Kuru Toga Pencil with a Pentel Eraser
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains an optogate . These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the hinges use M3x25 mm…
custom made a fxr sideplate panel that uses brass heat inserts with provisions for moto gadget
While it is great to have photogates mounted above the track, it has disadvantages too. I designed these horizontal mounts to go with the Vernier tracks, but they will probably work with PASCO tracks too. To go with the photogate adapter,…
Kuru toga standard cap. Designed to protect the mechanical pencil tip during carry. My standard kuru toga 0,5 grip is wrapped with electrical tape for better grip. Printed with PLA at 0,20mm layers, 5% infill, USE SKIRT/COLLAR print…
I didn't like the stock grip that comes on the Kuru Toga Advance Upgrade, so I designed this replacement.
Krabička pro mikrotužku Uni Kuru Toga s prostorem na náhradní tuhy. Krabička je inspirovaná modelem https://www.printables.com/model/975575-uni-kuru-toga-standard-box. Můj model má mnohem příjemnější úchop při vyndavání tužky tvarování…
Print in Place Box intended for Kuru Toga Mechanical Pencils. Includes an Organizer liner and a tube eraser holder and cap. Box is based on a Freecad file I downloaded from lukkot@lukkot_4640513
Do you have Thruxton or other bonneville and you want heated grips, motogadget indicators AND the motogadget mirrors? I did, so i designed this mount in fusion to replace their original one that kept pinching my wires to death and had it…
Modeled in FreeCad 1.1.3 Lost mine some time ago so I modeled one really quickly. Make sure your printer has 0.2mm tolerance. Printed at 0.2mm layer height with arachne wall generation using aligned seam. Printed in PLA.
This is a cap/ lid for the popular and well loved Uni Kuru Toga mechanical pencil. This pencil does not come with a cap when you purchase one. I am constantly on the move and had the read that breaking the lead tube at the writing end of…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains an optogate . These boxes fit the inlay of my Peli 1560 that I will share in the next days. For the hinges use M3x25 mm…
custom made a fxr sideplate panel that uses brass heat inserts with provisions for moto gadget
A test run model created from a figurine through photogammetry
