Liczymy pasujące modele…
Simple holder for the camera TrueLife NannyCam H32. Base and holder are separately and ready to create your own holder. Both parts are conneced togetther with two M3x12 screws and two M3 nuts. Supports are required for a base only. Screw…
Truelife NannyCam V24 Mount Easy way to mount the cam to anything smaller than 25mm. Suggest 0.1 layer height for thread precision *update 13/01/21 - added a deeper bore version (original is 7mm, long version is 14mm deep) as per…
Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…
After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…
Šroub musí být zmenšen v celkovém měřítku na 99% kvuli vůli závitu.
Simple stand for TrueLife SonicBrush Compact Duo and several spare heads. I made it because these toothbrushes have a slightly different dimension than the others and my wife and I wanted something that would match the other accessories…
New better version V2 here - TrueLife NannyCam camera holder - Version v2 od autora anthan.cz | Stáhněte si zdarma STL model | Printables.com Holder for TrueLife NannyCam H32 babyphone fits to edge of bed suitable for width 20-28mm only…
Standard print on PLA, holder glued to the wall.
Update 6th May 2026: Thanks to mara5740_276777 I realized one file was missing. Just now added as "molette M6-Body" easy to print holder to fix the truelife nannycam R6 camera. PLA, layer 0.2 mm. Update: a second version for the base of…
Can be easily mounted on various surfaces using a double sided heavy duty adhesive tape. Be sure to clean any dirt and oil from surface before applying the tape. Print from PLA.
Zjistil jsem, že kartáčky Clean30 od TrueLife nejsou úplně kulaté, tak jsem vytvořil tento jednoduchý model Duo, bez zbytečných otvorů pro náhradní hlavice, na které se stejně jen práší.
Today I finally had time to finish the toothbrush holder project. In the original model, I counted on the inserts to hold the replacement heads firmly in place. So they don't wobble and fall off. Here they are.
Easy print holder for camera TrueLife NannyCam H32. I recommend split the screw to two halfs for easier print and then connect with glue.
Stand for TrueLife NannyCam R3
I needed a holder for babysitting camera. Mount to bedframe profile 22,5 x 52 mm. For other mounting dimensions, part 3 and 4 need to be redesigned (if interested, you can PM me). For complete installation, you need: original mount…
Truelife Toothbrush Holder for 2, glue to wall (VHB tape or other) Printed in 2 colors for nice accent. Use PETG or ASA/ABS (as it is in contact with water/moisture)
Simple holder for TrueLife NannyTone VM3. You can fasten it to your crib or bed using printed bolt. All you need to do is to insert two M3 nuts into sockets at bottom of holder and attach bottom part using two M3x10 screws .
Toothbrush stand Truelife junior
Fits most cots. Alternatively, just adjust the width of the holder. It is only necessary to maintain the size and offset
Safe holder based on screwing mechanism. Designed for 5 x 2 magnets. PETG with 0.2mm used
Download and print .3mf/.gcode file with recommended supports and settings (with stop for inserting the nuts). Or Use holder body from original model (https://www.printables.com/model/549840-truelife-nannycam-h32-holder), and print .stl…
Standard print on PLA, holder glued to the wall.
Holder for your toothbrush.
it was annoying to always have to charge it without a stand so i just made a stand with a hole for a charger
Wall-mounted TrueLife SonicBrush Compact holder.
TrueLife NannyCam holder designed for in‑car use. When the baby is sleeping in the car in the driveway, it’s useful to monitor them with a camera. I power the camera using a 10 000 mAh powerbank. The holder snaps onto the headrest rod. I…
Designed for TrueLife Clean70 toothbrush but probably fits others as well. Print with tree supports.
Stojánek na kartáček TrueLife SonicBrush Clean70 UV - Tak aby tam šla vložit nabíječka Toothbrush stand TrueLife SonicBrush Clean70 UV - So that the charger can be inserted there
Holder for smart camera TrueLife R3 smart, part 2 universal, part 1 must be adjusted according to the mounting method
Toothbrush stand – two versions (Tank / Toothpaste) A practical and compact toothbrush stand for the bathroom. It solves two common problems at once: dripping water from a wet toothbrush and storing toothpaste when the toothbrush is not…
After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…
Easy print holder for camera TrueLife NannyCam H32. I recommend split the screw to two halfs for easier print and then connect with glue.
TrueLife NannyCam holder designed for in‑car use. When the baby is sleeping in the car in the driveway, it’s useful to monitor them with a camera. I power the camera using a 10 000 mAh powerbank. The holder snaps onto the headrest rod. I…
