Liczymy pasujące modele…
Convenient and space-saving holders to support pan lids inside a kitchen cupboard door. Attaches with a screw (or double-sided tape if you don't want to drill holes in your cupboard doors). These have been designed specifically for my Le…
The small one with one pin fits for every shelf, etc. with a diameter of 5 mm. The big one is intended to fit with IKEA PAX. The pin diameter is also 5 mm and the distance between the holes is 32 mm. As two holes are used, it holds really…
If your wife or girlfriend has too many cups, you can use them to expand the cupboard and make room for more cups. Does not require screws. The shelf is inserted directly into the holes in the cupboard wall. But it also works without…
Bookcase and cupboard with interchangeable shelves for tabletop games. For FDM printers: I recommend printing with a brim if you have adhesion issues, as the shelves are very small and might warp and pop off the plate. In this case you…
A small basket for the inside of cupboard doors. I glued the mount to do the door, but you could use some other method of adhesion if desired. I can add screw holes if anyone wants them. Basket itself will print without supports. I…
This is a small modular plate rack I designed to organize the plates in my cupboard. it is designed with a 20mm space between each "spine", with a 10mm width and a 30° angle. Each segment has 4 spaces for plates, and a front and/or back…
This model is based off the LEGO Cupboard 2X3X2 and the LEGO Drawer. Print two of the drawers.
I have a Small Freezer that gets knocked open too easily, Lost a lot of food over the years. This is a re-mastered version that is inline to suit. These are compatible with the original verson to make cupboard door locks. (See Picture)…
This is a simple, easy to apply cupboard hook.
Here is a small cupboard catch I made up to stop my 1 year old from getting into things he shouldn't. It was printed with PLA and a layer height of .2 and an infill of only 10%. I found these to be strong enough for what I needed but can…
This is an elegant Art Deco style handle designed to replace any standard 96mm (3 ¾") handle, although I have included a link to the original file so that the screw spacing parameter can be changed. For information on how to use this…
This template has been published with a standard 96mm (3 ¾") spacing for handle holes, positioned 45mm from top and sides of the cupboard face. It incorporates a notch to indicate centre as a simple check. NOTE - this file is designed for…
You have a small kitchen. There is no more space on the counter or on the walls and these oversized kitchen tools keep jamming your drawers? HANG THEM! On the cupboard door, for example! HOW TO USE: Simply stick to the top edge of your…
Designed a small door / cupboard knob 40mm in height 30mm at the base Takes a M3 brass insert for an M3 bolt Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: o.2 Infill: 10 Filament: eSun PLA+…
This is a remix of the excellent Dishwasher Tablet Dispenser . I wanted a clean way to keep it mounted under my sink without drilling, so I designed a slide-in holder that attaches to the cupboard wall with double-sided tape. Dispenser…
I needed some door handles for my new bathroom that was being installed and figured these could be 3D-printed with no issues. These feature a modern (and thus also simple) design that has some slight chamfers on the inside. They were…
Cupboard door knobs / handles with screw hole. The flat handle is a request from my aunt and uncle, who were having trouble finding an art-deco cupboard handle. Feel free to send in your own pictures, and I'll have a go at creating a 3D…
As mentioned this is a remix of Spyder7022 TipToi Pen holder: https://www.printables.com/de/model/116818-tiptoi-pen-holder-for-ikea-flisat-childrens-booksh I removed the holder specifically needed for the mentioned IKEA bookshelf and…
Meter Cupboard Key Triangle Long Utility Gas/Electric Meter Cupboard using Triangle to open, will fit deeper triangle holes* to open gas meter or eletric meter cabinets with a deeper recessed hole, will work with less deep holes as well.…
Der Schrankkorpus muss mit ABS gedruckt werden. Für die Front wird 3mm dickes Acrylglas benötigt. Jedes Frontelement wird mit 3 verdeckt angebrachten Scharnieren am Korpus befestigt und durch jeweils 2 Magnete verriegelt. Die 3 einzelnen…
Updated compact version from: https://www.printables.com/model/194761-cupboard-door-pan-lid-holder …with a concealing cap (to be super-glued on) to hide the screws.
Story: I always have small things like screws, ball bearings, sensors, … lying around and I wanted to have a neat place to store them. The old wardrobe beside my desk offered a neat space to attach a small cupboard. Therefore I designed…
A quick spice rack that my wife requested that can be fixed to the inside of a cupboard door with VHB tape or 2 screws. Includes a 5 jar and 2 jar variations, they can be fixed with vhb tape or screws or in my case both. I printed with…
Cosmetic tissue box. You can stick the box at wall or under cupboard / table
My daughter asked me to print her a cabinet with drawers for her dollhouse. That is why I designed this cabinet. It is designed from the size for Playmobil and the drawers have a stopper to prevent a pull out.
After seeing an item on kitchen storage organisation my wife asked if I could make something to stack and view tins and jars. This is what I came up with. Due to the limitations of my printer bed it is made in two half's with a centre…
This model is compatible with the lego system.
I had another spice rack that would hold the smaller 46mm spices that was downloaded from this site, but needed something for the rest of the spice jars.
VW T5/T6 California - cupboard hook (single) Inspired by VW California hooks (rail + gap)" by rasniel Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 40% Filament: Multec PLA…
This model is compatible with the lego system.
Just some simple 1*2 TTRPG cupboard Printed in PLA at 0.2mm and 15% infill No support needed Compatible for 1*1 inch grid map
Model comes in two variations: Standard: Which expects the fans to sit partially within the cupboard/wall. For large rectangular cuts. Deep: Which allows the entire depth of the fan to be housed. For flush mounting where you only intend…
A basic square drive key commonly used for accessing utility/meter cupboards. Available in 2 lengths ~50mm and ~20mm. Requires a strong filament, I have been regularly using one printed in PETG for a number of months now and it still…
Imported form My from my thingiverse account. Used the most common magnets i had around. Still testing. (not sure how long the exposed magnet will last) (Used for 3 months now seems to be holding up.) Update2: Clipped thru the bottom of…
Handle/ knob for drawers or cabinet doors
VW T5/T6 California - cupboard hook (dual) Inspired by VW California hooks (rail + gap)" by rasniel --> dual hook (inside & outside) Link to Single hook Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: No Resolution:…
Cabinet Handle for a cupboard, closset or a door. This can be printed without support if you place it upright. Update 05-03-2024: Added a v2 model, with less sharp edges below the holes. I would like to see how other people made and use…
In order to declutter my countertop, i now store my cuttingboards inside the cupboard. Fixed with TESA Powerstrips 2kg
top part and tooth would be 100% infill in all situations, handle I printed in 25%. I recommend to print it from PETG, ABS and etc.
This is a longer version of @Nottingham82's model, with screw mounting holes.
This model is compatible with the lego system.
The spare cupboard latch for Hobby caravans models 2007 - 2008. Hobby p/n 4150040007. My printing setup: Material: Prusament PETG Nozzle diameter: 0.4 mm Layer height: 0.1 mm DETAIL Infill density: 100% Support: YES Filament used: 5g…
The original model was great but I wanted something shorter/smaller, so I went ahead and created this. Body Diameter: 16mm Triangle sides: 10mm Original model by @3DTryOuts
My cupboard door fell off because the screws on the hinge got very loose so I made a brace that sits on top the original hinge to hold in place. Remove original hinge screws before using this brace/ I used 3cm wood screws Print Settings…
I just made this to support tupperware lids and silicone covers in the cupboard.
Printed in PETG, .25mm. 20% infill. Attached using 3M VHB tape. Fusion3D template included. Model can be adjusted by changing “PanWidth” parameter.
Just a storage for 4 rolls of whatever you choose. 1 compartment is bigger for the large Clingfilm device. My wife's idea - she wanted to free up some space inside the cupboard itself.
Kitchen cupboard handle for 4mm wood screws 129mm apart Madlo na kuchyňská dvířka
Easy to print, easy to assemble with two small screws.
Material: PLA works great! There will be a gap between the fridge and the cupboard door, this is to add more strength and can be made smaller is needed.
Printed with transparent PETG This solution can carry a lot. With a wall thickness of 2 mm and a dimension of 17 mm, it fits on standard cabinets, doors and windows. The length of the hook is 62mm and is 50mm at the bottom on the widest…
Print parameters and result will be upload once I print it.
Cupboard handle. 2mm space needed between the doors
Simple fan mount for cupboard to keep your raspberry pi or simple Nas cool.
There are two models, one for double side tape and one with boreholes. Dimensions 160mm wide 40mm tall 80mm with the extension 5mm boreholes Print 50%+ infill PLA+/ABS/ASA No support needed
I hate not being able to charge my stuff in the kitchen. My wife hates it too, but she also desires that 'when the countertop is clean, its CLEAN'. So, this was the idea we came up with to keep the clutter down, and keep the cupboard…
Ok, PHEW. This is a remix of a lot of things. My wife ran across a dragon head version of this (hi! Thank you! Awesome creation!) and we're... we're more Nintendo people, so after searching extensively for a model of Wario with his mouth…
a simple doll house cupboard will need to be re scaled depending on what scale dolls you have
Dimensions Hole spacing: 128 mm Holes: 4 x 18 mm Materials PETG or ABS for durability - PLA+ may also work Post printing You may want to clean up the bottom with sandpaper - it shouldn't be visible anyway Update 2022-12-15: V2.3 - some…
Trashbag holder for cupboard door with 22mm width. I use it to collect my 3d printing leftovers/failures in a trash bag. Print two of the holders and put them onto the cupboard door and hang a trash bag onto it. Using double sided tape to…
I could no longer see my wife throwing everything in the closet in a messy way. That's why I designed this little shelf.
Lock for cupboards that gets unlocked by a magnet. This makes cupboards toddler proof. I use it mainly in the kitchen, where the little dude often made a mess by emptying the bottom cupboards. BOM: 2 Neodymium magnets 10mm * 10mm * 5mm 2…
I needed a simple spice rack for my cupboard door. So just designed this.
These simple spacers make setting up and adjusting cabinet drawers and doors easy - no need to rely on “by eye” simply place them in the gap and adjust until the fit is as you require. There are two sizes - 2.5mm and 2mm - if you require…
This is a cupboard handler with a center distance of 96mm Poignée de placard avec entraxe 96mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 40% Category: Replacement Parts
Problem: The support pins for the shelfs in an Ikea Pax wardrobe broke and the hole got damaged. Solution: To repair this I designed a shelf pin that extends down and fits also in the next 2 holes so that the weight of the shelf is…
simple holder to tidy cupboard, or to keep tins from rolling round in caravan. Small (3mm) holes added for screws, and larger hole on the other side to access screw heads. The overall dimensions allow 3 tins, with some space to add a few…
Dispenser for Nespresso capsules. You take out the bottom ones. Printed upright. No support.
A simple design for my kitchen cupboards
Our kitchen cupboard was a complete mess, so I wanted to add some dividers. After trying several things, I printed some brackets to mount 1/8-inch thick hardboard dividers. With the help of a hardboard template to space them, it turned…
If you're one of those people who like to be able to see all the tins in their cupboards this may be for you, simple 2 step design that allows you to have your tins on different levels. Requires two pieces of wood approximately 95mm x…
I plan to modify design for a thicker base and larger screw holes. I had to drill otu with 1/8" bit to use #6 screws to fasten to cabinet. Under tension I don't feel they will last but as a concept they are a hit with my wife.
My first design :) Under cupboard mount for echo dot. I didn't fancy drilling holes in my wall tiles, so i created this. It's designed to be fitted to the underside of wall units. Print Settings Printer Brand: Creality Printer: Ender 3…
With all the lids flying around in the cupboard I was wondering how to solve this, this is what I created. It is width adaptable. Printed in PLA, infill 15%. Please like, subscribe and return your comments. Feel free to donate, thank you.…
Door Catch / Cupboard Catch extension This is an extension of the Door Catch / Cupboard Catch by Pauley smalls . I made a quick extension of his concept so that the "catch" can be installed in a cupboard where there is some gap between…
Handle for use on cabinets, kitchen cupboard, chests of drawers or much more. The handle is designed for screw mounting. <><><><><><><><><><> Take a look at my other Models: Other Models <><><><><><><><><><> If you like my work, I will be…
Wastepaper basket with holder for cupboard doors
I loved the idea of the spray bottle holder for my plants, but I don't have cabinets to hang them on. So I took off the cabinet door hook and added a screw hole so I can use it in my greenhouse area. It works great for all my spray bottles.
This is a repair of Jans cupboard door handle.
Small cupboard with drawers decorated with tree pattern. 3 x M3x8mm screws are required. Size is 100mm x 100mm x 100mm
I have no expectations that this will be of any use to anyone as it's designed for my specific cupboard door dimensions. However, I had requests to borrow some of the features, so here is everything I have--hack away. This is just a…
HI, a friend needed a replacemant clip for the fixture of a cupboard of a VW T6 T6.1 California Ocean Coast. I to the measurements from an original clip. These original VW clips seem quite fragile. Exactly what I expect from a 70.000€…
Use organic supports (tree supports) to make holes straight away ready to use PLA 0.4mm nozzle
What? Simple bolt like thingie to jam cupboard doors in the kitchen shut for the tiny ones. Customizable regarding hole diameter and spacing, gap width, and material thickness. The default values are what made the one in the picture,…
This is a small doorknob/cabinet handle with a centre screw hole. Note: unlike normal handles, which are screwed in from behind, this one screws in from the front. It conveniently fits the screw of the door of the KidKraft Play Kitchen…
Easy wall cupboard mobile phone holder, to stream during cooking, or for the recipe.
From center to center of the holes space is 64mm. Should be fairly easy to remix / split the model and increase the spacing if you should need to do that. Supports are not needed if you print the screw holes upwards, otherwise supports…
This is a slight remix of an existing model (https://www.printables.com/model/779505-ikea-besta-hanviken-door-child-lock) to remove the edge on the mounting face of the door side of the mechanism. The interior of my Bestå doors did not…
HOW TO USE: Simply stick to the top edge of your door/board with a double sided sticky tape. VERSIONS: CLOSED Hook is more closed to hold objects better OPEN Hook is more open, good if you need to reach high for your object on the upper…
Hooks to hold the scissors and nail clippers from my bathroom cupboard using the adjustable shelf peg system. Likely not directly useful to anyone but me but perhaps the models will give ideas for something custom to your life.
I use it to hold my Scale under the cupboard in my kitchen. I hope you enjoy! For best results you can pre-drill the hole for the screw, a 1mm should be enough.
Having an ELFA storage system in the house is nice, but expensive to get new parts. Thought a simple hook would be good, but paying $1 or whatever seems overkill. Designed this hook to carry my backpack (or whatever) and fitting in the…
Nifty cupboard/ draw handle. Fasten using 2 self-tappers (pilot holes in model). Print settings: Support: optional Apply your normal settings based on material.
Simple to print and install hands free door and cupboard openers. Will upload photos of them in action over the next couple of days! Use 3M or similar double sided mounting tape or screws to attached to your doors or cupboards. RED: A toe…
Designed this shelf support for a large cupboard shelf in the kitchen that takes 2 countersunk wood screws for added strength and to prevent the support from rotating. Printed in 60% infill PLA in order to take some heavy weight without…
160 mm drawer and cupboard handle
J'ai modélisé un rangement pour le placard dans la cuisine à visser dans la porte intérieure du placard sous l'évier par exemple
Tested cupboard child security : flip it to unlock the door, flip it to close the door. Can be used with one hand. I used it under a fake drawer under the sink.
