P
Printablestimf
IKEA Vattenkar Gridfinity grid
Gridfinity baseplate for the double layered desk organizer. Split the model to fit your build plate. For my Mini I had to split it into three parts.
- Pobrania
- 212
- Polubienia
- 33
- Ocena
- 5
Wyniki wyszukiwania: vattenkar
37 modeli
P
PrintablesChris (Aero)Engineering Design
IKEA Skadis/Vattenkar - Template & Printable version
3D Model of the iconic IKEA Vattenkar board to be used for modelling or just to measure distances, etc. I also included a version of printable parts that I used to print my own Vattenkar, because I like it way better in Gentleman's Gray…
- Pobrania
- 78
- Polubienia
- 23
- Ocena
- 0
P
PrintablesBM Paridae
IKEA Vattenkar leg
These legs replace the original clamping stands of the IKEA Vattenkar shelves with normal legs. Enables use cases where clamping isn't possible, like a spice rack. Assembly: Use the screws of the original stand, so no extra hardware is…
- Pobrania
- 70
- Polubienia
- 24
- Ocena
- 0
P
PrintablesUpside3048
Headset holder for Vattenkar desktop shelf
Supports are required below the wings of the holder. Update 22.06.2023: More stable version for heavier headsets (v3) uploaded
- Pobrania
- 69
- Polubienia
- 8
- Ocena
- 0
P
Printablesnetaes
Containers for the VATTENKAR Ikea shelves
After creating the Roll Holder Adapter for VATTENKAR Ikea Table Shelves , I developed topless containers to enhance storage solutions aesthetically. I introduced two sizes: 14X14X12 cm and 20X14X12 cm, each with two options - one with a…
- Pobrania
- 60
- Polubienia
- 10
- Ocena
- 0
P
Printablesba_kami
Phone holder for Ikea Vattenkar monitor stand (updated)
Simple phone holder with mounts prepared for attachment to Ikea's Vattenkar monitor stand. The bottom part (the feet) includes a space to allow for wired charging. The stand can hold a phone up to 11 mm thick. Included in this printable…
- Pobrania
- 50
- Polubienia
- 5
- Ocena
- 5
P
Printablesctheroux
Ikea Vattenkar Cable Holder
This is a cable holder for the Ikea Vattenkar organizer. A M3 x 6 mm nut and bolt or equivalent are required for assembly. Support material is not required. An infill of 30% is recommended. This object main web page is:…
- Pobrania
- 48
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKolumbb
SD card holder vattenkar IKEA
SD card holder vattenkar v2 No supports needed but brim is necessary Made of PLA (spectrum)
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTamas Debreczeni
Ikea Vattenkar headphone hanger
headphone hanger on the "corner" of the Vattenkar, requires a M3 screw
- Pobrania
- 37
- Polubienia
- 4
- Ocena
- 0
P
Printablesbiglesp
Multimeter Holder For IKEA VATTENKAR
I designed this holder to keep my Aneng AN8008 multimeter handy, but not cluttering my desk. The holder is large enough to hold a “full size” multimeter, I tested it with a UNI-T UT58C and it fit perfectly, and there was still space for…
- Pobrania
- 36
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKolumbb
Headphones holder Vattenkar IKEA
Vattenkar headphones holder - ver.2 I used profile with large radii. The headphones touch on surface not on holder edges. Made of PLA (spectrum)
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 5
P
Printablesdisc0p
Gridfinity Vattenkar Base Split in Half
You can either print two if it fits in your bed, or if you have non-gridfinity things you can just have half up there.
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
Printablessegrwolf
Headphone holder for 25mm square pipe, IKEA VATTENKAR
print without supports
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 5
P
Printablesb
Divider for IKEA Vattenkar shelf
Shelf divider for IKEA Vattenkar desktop shelf . Uses 3x 6mmx3mm circular neodymium magnets to stay securely in place while still allowing you to slide it around when necessary. Print with zero top and bottom layers, increase infill…
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 5
P
PrintablesDalawa
Hard Drive Storage for IKEA Vattenkar Laptop/Monitor Stand
I made this to fit two hard drives into my IKEA Vattenkar Laptop Stand. The clips at the bottom attach to the back of the stand and slides through. I also added thumb holes to easily take out the hard drives. Printed in PLA with 15%…
- Pobrania
- 19
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRatlet
Skadis / Vattenkar Embroidery Thread Holder
Spool holders for Brothread Embroidery Thread Spools. There is a 4 and 3 spoke version so that you can maximise with number of spools you can fit in a Vattenkar pegboard caddy. The spool holders have a small nub on the back which helps to…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesUpside3048
Hue dimming switch bracket for Vattenkar desktop shelf
The magnets on the hue dimming switch are not very strong. The hue dimming switch may fall off during use when you stick it on a Vattenkar shelf. This bracket holds the dimming switch in place. It should be printed with supports and in…
- Pobrania
- 17
- Polubienia
- 5
- Ocena
- 0
P
Printablesnetaes
Roll Holder Adapter for VATTENKAR Ikea Table Shelves
I created an adapter for Ikea's “VATTENKAR” table shelves, allowing me to attach a pole for the “MALA” paper roll. The holes have a diameter of 2.45 cm, and I've uploaded a parametric Fusion360 file that can be edited to fit your specific…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
Printablesctheroux
DIY Clock Case Vattenkar Holder
This is a holder for the DIY Clocks model YSZ-4 and ZM-804 Case for Ikea's Vattenkar Desk Shelves. Support material is not required. An infill of 20% is recommended. This object's main web page is:…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablesmarleysan
Ikea VATTENKAR - phone stand/support/holder
phone holder designed to work on this specific ikea desk organizer
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLabel2
universal microphone holder for ikea vattenkar monitor shelf
a universal microphone holder designed, to function with thevattenkar monitor shelf from ikea
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAlpenmeister
Swedish furniture leverless fightstick (The Sven - Ikea Vattenkar)
Parts needed: Ikea Vattenkar monitor stand arcade buttons of your choice a controller board like a gp2040-ce breakout board or a brook fighting board wiring forstner drill for the holes and a few screws to mount the side panels glow in…
- Pobrania
- 11
- Polubienia
- 4
- Ocena
- 0
P
Printablesalex.so.3
IKEA VATTENKAR Hantek 6022BE mount
Hantek 6022BE Oscilloscope mount for IKEA VATTENKAR. Surprisingly very stable, needs only two M3 screws for mounting.
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
Printablesn8many
Vattenkar Panel Palette Mod
I've been wanting to create a portable paint rack that would allow me to take my mini painting out of my workshop and to whatever other table I felt like painting at. My original plan was to take a 14"x22" SKADIS and put legs and a handle…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
Printablesctheroux
Ikea Vattenkar To-do List Holder
This to-do list holder is designed to be installed on a Vattenkar desk organizer from Ikea. It uses 3 x 5 inches index card. A template is provided to draw bullet point items on the index cards. The holder shall be printed upright with…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesctheroux
Ikea Vattenkar Zip Tie Hooks
These are 2 sizes of zip tie hooks to hang an object under the shelves of an Ikea Vattenkar. You need to print a pair of hooks. You hang them on each opposite sides of a shelf and pass a zip tie in the lower holes. Support material is not…
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTimberWolf
Vattenkar stacker
A print that enables you to stack two Ikea Vattenkar shelves (for space saving). Or the Vattenkar plant-nursery in this case... The prints are made to be sturdy, but I would limit it to 1 stack high like in the pictures. Please don't…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDimon
IKEA VATTENKAR shelf expantion
To assemble - glue support to the shelves and attach to the VATTENKAR by inserting and twisting the hooks. Use the cutout version for the bottom shelf.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printableseliasv
Spacer for Ikea Vattenkar
Spacer for Ikea Vattenkar, best to be printed with TPU and at least 15% infill and three outer layers.
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGnome1158
IKEA Vattenkar Desk Drawers Gridfinity
Version 2 of my IKEA VATTENKAR desk drawers (v1: Printables · MakerWorld ), rebuilt from scratch around Gridfinity. My stands carry two stacked monitors, so the plywood sags in the middle. This set fixes the sag and gives every drawer an…
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
Printables
Ikea VATTENKAR - phone stand/support/holder
phone holder designed to work on this specific ikea desk organizer
P
Printables
Skadis / Vattenkar Embroidery Thread Holder
Spool holders for Brothread Embroidery Thread Spools. There is a 4 and 3 spoke version so that you can maximise with number of spools you can fit in a Vattenkar pegboard caddy. The spool holders have a small nub on the back which helps to…
P
Printables
Roll Holder Adapter for VATTENKAR Ikea Table Shelves
I created an adapter for Ikea's “VATTENKAR” table shelves, allowing me to attach a pole for the “MALA” paper roll. The holes have a diameter of 2.45 cm, and I've uploaded a parametric Fusion360 file that can be edited to fit your specific…
P
Printables
Headphones holder Vattenkar IKEA
Vattenkar headphones holder - ver.2 I used profile with large radii. The headphones touch on surface not on holder edges. Made of PLA (spectrum)
P
Printables
Pen holder for IKEA VATTENKAR Desktop Shelf
Happy 3D Printing! I made simple pen / pencil holders that fits neatly with the IKEA VATTENKAR Desktop Shelf product. I created three variations depending on where the rounded corners are placed, do download the one that best suits your…
P
Printables
Bookends for IKEA VATTENKAR Desktop Shelf
Happy 3D Printing! I created a simple bookends that perfectly fits with the IKEA VATTENKAR Desktop Shelf. Its square design allows it to be placed horizontally or vertically, depending on your book size. You can download its FreeCAD file…
P
Printables
IKEA VATTENKAR shelf expantion
To assemble - glue support to the shelves and attach to the VATTENKAR by inserting and twisting the hooks. Use the cutout version for the bottom shelf.