Liczymy pasujące modele…
Color airplane kit. folding is very simple. enjoy printing and share photos of your prints! The Waco YKS-6 aircraft was one of the iconic airplanes of the golden age of aviation in the 1930s. This biplane was known for its robustness and…
This lean, mean, ball-peen is ready for your general clobbering needs! And while it won't drive a galvanized nail into a pressure-treated fence-post, it will dutifully bludgeon interior nails, bang tight-fitting objects together, annoy…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! E3 Awacs This is another plane for your collection : the E3 Awacs, which is a detection…
Print your very own Wacky Track fidget. The pictured chain has 24 links (12 in each color) Download the 3mf profile to print 16 links with support. Print two copies, in two colors. Once supports are removed, simply click the links…
This tablet stand was designed to improve the ergonomics of the Wacom One. (for me it works) Has a place to put the stylus. 3mf file included. Only things different than stock .3mm profile is 1 less top layer and 10% infill with a three…
Spartan Guard – Detailreiche 3D-Skulptur Diese beeindruckende Miniatur eines spartanischen Wächters wurde mit PETG auf einem FDM-Drucker im kleinen Maßstab gedruckt. Trotz der geringen Größe kommen die charakteristischen Merkmale – wie…
Hier ein Led Teelichthalter der ausschaut wie eine geschmolzene Kerze. Es können aufgrund der niedrigen Seitenwände auch echte Teelichter verwendet werden ohne Probleme.
You might wanna scale the size in the slicer a bit. For me 103-104% scale worked fine. 0.2mm quality layer height 20% infill Grid support on bed Brim
I designed this replica of the famous Wacken skull years ago. Since Wacken is again just around the corner, I'm uploading it here now. The size is designed for a 22 x 22 cm print plate (model needs to be rotated a bit), but can of course…
I built this model to use Parkside battery with a Kärcher string trimmer (weedwacker). It slides into the Kärcher tool, then the Parkside battery slides into it. The battery contacts are made from Faston terminals: 2x Faston tab for the…
Stand designed for the pen that came with the Wacom Intuos CTL490 graphics tablet.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
"Ich hätte gern ein Stück Fleisch , .............. aber ohne Fleisch ! " Hmmm....... vielleicht eins vom Baum? Oder vom Feld? Nein ich weis,…..hier eins aus dem 3D Drucker, garantiert ohne Fleisch! Ich fühle mich verar....t wenn ich z.B.…
Das 3D-Modell stellt ein Videoüberwachungsschild dar. Das Schild ist in einer rechteckigen Form gestaltet und besteht aus robustem PLA. Auf der Vorderseite des Schildes befindet sich das Symbol für Videoüberwachung. Darunter ist ein…
I combined two models of a pen holder and David's head scan and then sculpted the details. Note that the model should not exceed 135 mm height (Z axis) or the pen doesn't fit. I used supports for my own print. I used 0.1 layer height with…
Update 02/07/2025 New remix avaiable: Stand for tablet and pencil Update 19/11/2024 Step file has been added. Feel free to make your remix. Uptaded 17/07/2024 Notes: The print time has been significantly improved. Now you only need one…
Check out the updated redesigned version here: Printed on Creality K1 in 15 minutes with Eryone matte black PLA. Walls are 1.5mm thick so it is quite light, I recommend adding something heavy on the inside and then glueing something like…
-Material: ~ 30 gm -Printing time: ~ 5 hrs -Recommended quality: 0.2 mm -Dimensions: 156 x 62 x 13 mm If you like my work, don't forget to buy me a coffee ☕ You can also follow me on my social networks: Linktree: https://linktr.ee/Alitaria
This is a simple to print, yet good looking stand for the pan that comes with the Wacom Intuos M drawing tablet. Depending on the dimensional accuracy of your printer, it might be necessary to scale the print up a bit. Support If you'd…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The E-3 Sentry was developed from Boeing's 707. It is outfitted with communication, avionics, and its notable rotodome. The Sentry is tasked with command and control of the airspace it is monitoring. It sees all and serves as the datalink…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A simple wall mount for a Wacom Intuos 7.9" x 6.3" (or other similarly sized) drawing tablet. Can be used for wired or wireless versions. Prints easily without supports. Post-Printing Glue the two pieces together as shown, with the tab on…
Junction box for Foam Insulation | Puszka elewacyjna regulowana | 145mm - 180mm. I suggest using PETG
Ein stapelbarer Wachteleihalter (12St.). Schnelle Druckzeit, keine Stützen und nur wenig Material nötig. A stackable quail egg holder (12). Fast print time, no supports and only little material needed. Verbesserungsvorschläge sind…
This is my remix of my remix of my remix of the E-3 Sentry AWACS aircraft. I tried to make the details better by scaling to 150% and making the Rotodome easier to assemble, if you're printing the 3 piece option. This is public release…
Untertischhalterung passend für ein Wacom Intuos Medium Grafiktablett. Keine Stützstruktur notwendig. Verkürzte Druckzeit. Underdesk mount suitable for a Wacom Intuos Medium graphics tablet. No supports needed. Shorter printtime.
This is version 3 of the AWACS, a plane I've come to love. Now it has a better Rotodome file such that you can print in different colors and then assemble! It's more lifelike! I printed with “organic” supports, which seems to better…
Hier gibt es eine ausführliche Beschreibung: https://druckwasdaszeughaelt.de/star-wars-battlefront-ii/#trooper_wache https://ko-fi.com/dwdzhde Ein Sturmtruppler des Imperiums in Haltung aus dem Spiel Star Wars: Battlefront 2. Skaliert auf…
An absolutely massive grip replacement for wacom grip or pro pens (mine is years old so I'm not sure how much they've changed) Just disassemble the grip of your stylus and slide this piece over and put everything back on. If it sticks I…
Schild das Einbrecher abhält. F3d Datei ist mit von der Partie um einfach sachen zu ändern.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Created a holder that slots into the side (left or right) of the Wacom Cintiq 16 for use with the Wacom remote. Lower cut-out to access the power on button, the remote fits securely within the holder to prevent moving around during use.…
Wacom One PenTablet as Display The Wacom One is a Pentablet / drawing tablet which supports of a 13.3 inch fullhd display, similar to the professional Wacom Cintiq tablets. The connection of Tablet is HDMI in and USB (for Power and…
Slightly larger funnel and tamp. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: AnyCubic PLA Category: Kitchen & Dining
Use your leftover Filament for a replacement for the Wacom Tablet (Wacom One CTL-672) Pen nibs. To be clear... YOU DON'T NEED A 3D PRINTER (I just attached a sliced gcode and a STL because it's needed for the "last meter contest") You…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print with supports. Infill 20% Printed on Creality CR-6 SE without problems. This is a remix, that fits my needs for an easy-to-print and play, thing. AWACS is an aeroplane with radar attached to the top of it. An airborne early warning…
This is a sign to tell unwanted visitors of your property, that you have active CCTV cameras running. The sign is in German telling “property video monitored”. This model is optimized for a 0.3mm layer height. This keeps your print time…
This is an alternative model of engine cylinder for an RC airplane WACO YMF – 5. The original model was created by 3Dlabprint and is available on their website https://3dlabprint.com/shop/wacoymf5/. This model doesn't have as much…
Remixing Alex Berkowitz's wonderful Wacom Drawing Tablet Wall Mount with Skadis hooks instead of holes for adhesives.
A Pen holder for the Wacom One pen (For the Wacom CTL-672-N / CTL-672-S). It could also work for other pens, but not checked myself. See https://www.thingiverse.com/thing:4262541 for the FreeCad project file. Print instructions…
I needed a holder for my tablet when I'm not using it, so here it is. This is basically my first model in fusion so it's pretty simplistic. The .3 inch models are for a Wacom CTL-472. The pen holder version obviously holds a 472 pen but I…
Comfort grip for a Wacom Intuos Pen and Touch stylus (model LP190K), lightly inspired by the shape of the Wacom Airbrush Pen. The STL includes a separate part to use as a modifier for the fuzzy skin portion of the grip. Best printed…
Made this stand to hold my medium Intuos Pro. They changed the size of the pen holder, so I made this to accommodate the larger one. I also made a version that let me wrap up the cable and fit it into the back slot. Print Settings Printer…
Soporte para smartwacht Coros Pace 3 , en los archivos encontrarás el soporte por si llevas puesto en la mano derecha (dret) o en la mano izquierda (esquerra). De estos hay dos modelos uno para facilitar la extracción, ya que el mio queda…
Knurled grip for the Wacom CTL-471 pen.
1:1 perfect replacement threaded pen cap and side switch for WACOM Intuos 4 & 5 series digital pens.
Made a stand for my old Wacom Intuos digitizer tablet. Included a slot behind the tablet to more securely store the pen while in stored, or to hold it when using the tablet. Also has a little slot in the middle that I use to store the…
Stands your tablet and pen vertically while taking minimal desk space. I don't know if different versions are different sizes, the small wired version is the one I designed it for: https://www.amazon.com/gp/product/B079HL9YSF/ Opening is…
Hallo zusammen, ich habe diese Schild entworfen, um auf die Videoüberwachung hinzuweisen. Die Farben können angepasst werden. Auch die Größe kann geändert werden. Wer keine Schraubenlöcher möchte, kann diese problemlos entfernen, oder…
Print Settings Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 20% Filament brand: Smartfil Filament color: green Filament material: PLA
“Cockmill” or “windmill”, standing on a pole to show wind direction & speed. Inspired from wako biplane for a nice rendering. Large model, 640 x 640 mm. Not suitable for small printer, needs a large 350x350mm board for the wings. Some…
Soft Grip for Apple Pencil – Improved Drawing Comfort This soft grip is designed to enhance the drawing feel of the Apple Pencil. It was created at the request of an illustrator who has worked on a famous Japanese robot anime. The grip…
yet another Wacom One (ctl-471) stand Category: Accessories
Origin: This model came to be from a very specific demand: My girlfriend has an iPad with a wireless keyboard that attaches via magnets to the cover. When she used the cover as a stand (behind the iPad), the keyboard would slide when…
This is a model of a sitting cat. This is a typical Rosina Wachtmeister style cat. The model looks best when paited. preferably in bright colors. Printed with ender 3 V2, 10% infill. Can use some support around the head.
Printing plastic replacement parts is the what makes 3D printers really useful. Even though these nibs for the graphic tablet pens are probably not easy to print due to their small size I wanted to try it. So I measured the diameter of an…
This is the E-3 Sentry AWACS. I loved this model made by imataquito on Thingiverse, but I found that when printed, it was a bit asymmetrical. I waited for some time before concluding that imataquito probably isn't going to improve it. I…
Holder for Graphic Pen (Huion, Wacom, …) Hey maker! 👋 A handy little helper for your graphics tablet. Features: Holds your 3D pen or stylus neatly. Stick it to the side of your tablet with double-sided tape. Keeps your workspace organized…
I tweaked the design to work better for me when printing with PETG. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Filament: Prusa PETG Category: Kitchen & Dining
Summary Title: Wacom Pen Holder - No Supports Needed (Designed with Grasshopper for Rhino 3D) Description: Elevate your workspace with this sleek and functional Wacom Pen Holder, meticulously crafted using Grasshopper for Rhino 3D.…
a holder for the wiwacam mw5 camera.
A holder for the Wacom Bamboo Ink 2nd gen stylus, designed to fit into your USB Port. The holder provides a small gap for the buttons to slide through. The holder is designed for the Wacom Bamboo Ink 2nd gen stylus but other pens with the…
Untertischhalterung passend für ein Wacom Intuos Medium Grafiktablett. Mit Supports drucken. Underdesk mount suitable for a Wacom Intuos Medium graphics tablet. Print with supports.
Lost the button from my Wacom Intuos 3 stylus, so I designed and printed a new one! Works perfectly. Instructions I had good success printing at a layer thickness of 0.15 mm, extrusion width of 0.35 mm. (.35mm hotend). and 3 loops around…
The case should hold on the scale because of the friction of the silicone cover. There is a hole at the bottom and cutouts at the top to help you push&pull the scale out. I tried the model in both PLA and ABS on my scale, but no 2 devices…
Print your own TPU crossover rings for wacky-rigging soft-plastic worms. A standard O-ring helps keep the hook from tearing through the worm, but it usually leaves the hook running parallel to the bait. This crossover design adds a…
The brewing stand simplifies the brewing process – no need to hold the coffee maker while brewing; simply place it in the stand and go about your business. The brewing stand is a universal size – it accommodates a scale and a 300ml+ cup.…
Adapted flatsixguy's K400 holder into a top-mount bracket for the 22'' Wacom Cintiq (2019 version - model DTK2260K0A). Sits on top of the tablet - works best with the tablet tilted. With the tablet vertical (90 degrees upright/flat), the…
A small simple stand I did for storing my Wacom Intuos vertically to save space. Feel free to remix, change, whatever and share... .step file and .f3d file included.
Just a small rock shaped pen holder for my Wacom Intuos One Drawing Tablet. My goal was to make it as small as possible, but it should be rock-stable, that the pen doesn't tip over. So I tried designing a rock shape with a fitting cavity…
This is a simple tilt base/holder for a Wacom Intous Pro M graphic tablet with a penholder and spare tips. I printed it with PETG (PLA is also fine) and added some rubber to the top and bottom to prevent moving. The parts are glued…
Wachtel-Eierbecher V2 ACHTUNG für normale Hühnereier zu klein. Kochzeit ist natürlich deutlich kürzer als beim Hünerei ca. 3-3,5 Min. Als Löffel eignet sich ein kleiner Espresso-Löffel.…
Ständer für Wacom One Tablet. Der Schlitz ist breit genug um mit Velour beklebt zu werden, damit das Tablett nicht zerkratzt wird. ……… Stand for Wacom One tablet. The slot is wide enough to cover with velour to prevent the tablet from…
A Wacom pen holder featuring a nibs storage compartment, taking inspiration from similar commercial designs. Can be printed without supports. The Top part should be printed upside down (threads up). Please note that for the threads to…
Yellow Biplane Over the Mountains Category: Vehicles
Holder for Wacom Intous pen (11,4mm diameter)
Interesting that all my searches for this tool came up empty, though I would imagine that this winding crank is an easily misplaced tool. Maybe it was just the way I searched, maybe it's not really required as you can hand-crank the spool…
I printed it on Anycubic Photon mono X 6k. Supports should be used on bottom side.
This is the public Version 2 of the model that I've been working on; really, it's Version 3 (hence the file name) as my actual Version 2 could not print, so I decided to go back to basics. I wanted to make more noticeable edits on the…
The creation consists of 2 parts: the FreeCAD-file contains the basic geometry whereas the emf-File contains most of the writing. Designed for and with the bambulab-studio.
Model łącznika do wężyków od spryskiwaczy - banalna rzecz która gdzieś w sklepie kosztuje grosze - ale zanim się pojedzie do sklepu lub zamówi przez Internet można taki łącznik sobie wydrukować 11 minut.
This is a direct replica of the VESA mount included with the official Cintiq 16 Adjustable stand. This is required to mount the Cintiq 16 to a adjustable arm or other type of mount. Let's be honest, this piece should be included with the…
Futterbehälter für Wachteln. Zum anhängen oder hinstellen. Grosses Volumen. Die hälften lassen sich ohne supports drucken und einfach zusammenstecken bis sie einrasten Update! Neue Version hat keine offene Front sondern Löchern durch die…
The dosing funnel simplifies the puck prep process. It allows for convenient dosing of ground coffee into the Pixapresso basket. It also allows for the coffee tamper to be inserted evenly into the basket without tilting. When tamping the…
Introducing a stand designed for the Intuos Tablet and pen. The pen stand features a Bonsai-inspired design. This stand is available with or without a pocket, allowing you to add weights for enhanced stability. I use lead tape from this…
Update 9 4/6 22: I added a nose cone for those who would like to print one instead of using an extruded one. The extruded ones are cheap and light. The printed one is heavier but still works although it makes the rocket a bit overstable.…
A simple coffee tamper for the Wacaco Pixapresso basket. Replaces the included spoon. The base diameter is 44.4 cm, which is the perfect size for my Pixapresso basket. Print settings The print settings are the same as your printer's…
I use this awesome device to make coffee nearly every day. When disassembled the parts took too much space so I measured them up and made the drying station, which holds them neatly in a compact manner. I've provided five STL files, see…
My dog chewed my Wacom Intuos pen, so i made a replacement grip, and button, the button is madewithtinkercad https://www.thingiverse.com/thing:1249458 and the grip is printed in flexible filament (filaflex) Print Settings Printer Brand:…
We had a few Wacom Cintiq Pro 24 tablet displays at an office I used to work at, and over the years accessories tend to go missing. One of the displays no longer had the stylus clip that came with it, so I borrowed another display's clip…
A simple yet effective holder for your Thwack Hammer. Comes in screw on and Honeycomb Wall patterns. Skadis wall to be added later. This robust and tighter fitting design means your hammer wont fall off the wall (unlike other patterns on…
Simple stand for Wacaco Pixapresso. --------------------------------------------------- Jednoduchý stojánek pro Wacaco Pixapresso.
