233 modeli
Toy Heart Waffle Iron – Fun for Little Kitchen Chefs! Bring real kitchen vibes into the playroom – no electricity needed, just lots of imagination! This lovingly designed 3D-printed toy waffle iron comes with matching heart-shaped waffles…
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
Make sure you have a clean build plate before printing. 0.2mm layer 2 walls 15% infill You can always try other things if its not working
This tool integrates the tensioner, allowing one to open low security locks without needing a separate tensioning tool. 1mm or 1.4mm thickness Print with 6 walls (part should be solid, 100% infill) Use IRONING feature in slicer to smooth…
The bottom in the original pot can be a little flimsy, being only 1mm thick. It gets even thinner when you scale the model down, so in this version I made it roughly two times thicker. Otherwise it is identical to the original.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Original Design by Erlbeck https://www.printables.com/social/273939-erlbeck/about Decided to print with a .8 nozzle at .6 layer height in PETG. Looks alright to me.
An assemble-after-print model of the Morf Worm: https://wonderworkstoys.com/products/morf-worm The model is assembled as follows: 4, 6, 7, 8 (U), 8 (Box), 9, and back 9-1, both top to bottom and right to left, to make a crisscross shape…
In celebration of ZombieHedgehog's birthday, I designed this waffle. He at waffles on stream to celebrate and I only thought it fitting to design something to go along with the theme! This floppy design is a little different from my other…
This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
On our search for the legendary but elusive Perfect Belgian Waffle, this coaster was created! Designed using Autodesk Fusion 360. Print with wood or beige-coloured PLA filament for extra realism. Enjoy, but don't crack your teeth!
Description: The SC 50 was a small, general-purpose bomb used by the Luftwaffe in World War II. The bombs were carried by fighter-bombers and bombers, and came in several variants that weighed between 48–55 kg. They could be equipped with…
Geometric Vase designed to print in vasemode not watertight Dimensions 150mm x 70mm
This cutting plate is based on similar waffle cutting boards on the market. You will be limited based on the size you are able to print due to your printer. The squares likely are not conforming to the add-on gadgets that other plates may…
🍦 Ice Cream Wafer Fairy House – Sweeten Your Miniature World! 🍦 Step into a whimsical world where fairies dwell beneath swirls of soft-serve and crunchy wafers! This Ice Cream Wafer Fairy House is a delightfully model featuring a cozy…
This is a magnetic Mickey Waffle Ear, that is meant to be interchangeable with others in the series. Settings that I printed at: Prusa MK4 0.15 SPEED 15% Infill I used Overture Silk Copper PLA for this, which looks great; however, I would…
3 types of waffles, All you need is magnet of this size: 5x2mm and a bit of superglue. I used Prusa Printer i3MK3S, 0.20mm quality, 5%, PLA
This model is in 15x15 mm scale, made for dollhouses. Includes 2 files for top and bottom parts.
This is two turtlebot3 (Burger and Waffle) waffle plates able to be printed together. The 3mf file is included because it can be difficult to print well. Support enforcers are used. Printed in PLA .3mm layers.
Dies ist ein Waffen Ständer für mein Airsoft Pistole. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Ich habe es mit einer Tokyo Marui Hi-Capa getestet. Es scheint, dass es auch mit anderen Hi-Capa oder 1911 Modellen…
Waffle pattern handle secured with M4 screw and nut. Print Settings: Material: PLA, PETG Nozzle: 0.4mm Layer height: 0.30mm Supports: no Perimeters: 2 Infill: 10% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222
The V2 ( German : Vergeltungswaffe 2 , lit. 'Retaliation Weapon 2'), with the technical name Aggregat 4 ( A4 ), was the world's first long-range [4] guided ballistic missile . The missile, powered by a liquid-propellant rocket engine, was…
I found De3DPrintman's Stroopwafel design and created a coaster design out of it. I removed the slight overhangs, centered the pattern and scaled the coaster to a 100 mm diameter. Depending on the filament it looks quite realistic from…
A 1:64 scale model of a Waffle House inspired building. Best for playing with hotwheels toy and other 64 scale model toy cars. All stl components are separated by color. Glue is recommended with assembly.
Print in a matte yellow-brown for realism or in your favorite color. Green waffles anyone?
Jigs for helping solder stained glass pieces at specific angles. Print two of each angle, then you lay your glass in them and solder! These are made specifically to be used with the waffle grid mat systems, they have little pegs on the…
A model of RhB Waffentrager Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: Doesn't Matter Infill: 20% Category: Vehicles
This design allows you to hold an A1 Lidar from RPLidar to the Turtlebot3 waffle plate. The waffle plate is a module robot base platform used in the open source Turtlebot3. The attached 3mf file includes my selection of variable layer…
Simple waffle cone ice cream Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .1 Infill: 20% Filament: Creality PLA White Category: Food & Drink
My boys love waffles and recently got a pretend toaster for their kitchen play area but didn't have any waffles that would fit Feel free to remix https://a360.co/2PkVJ9s Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
Everyone loves waffles! Print Settings Printer: Prusa Mini Supports: No Category: Jewelry
My 8in wafer seems plenty stable, if you're displaying a larger wafer you may want to weight the stand to keep it from tipping.
This 120x120mm Waffle fidget toy is foldable, floppy, and full of fun! Enjoy!
Easy to print, no supports, any material are fine. Suitable for succulents, orchids and all other plants. Optional drain holes Optional Saucer Optional inner wall - make a planter for orchids or where the plants come out the sides. This…
Original Waffle pattern pot with increased facets count to avoid artifact on base. My goal was to these artifacts on original model. After : All credits go to the original author, specially for sharing scad file.
Fun waffle pendant design for making your own jewelry! Quick and easy to print.
CZ 515 22LR - 15 round magazine - Waffle Mag! Fully DIY 15 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus…
My wife needs some Waffle Cones for her Instagram, so I modeled this in Fusion 360 using Coils. The Angle of the Coils is 15° and the original size of the cone is 50mm x 150mm. She needs them to be shorter, which is why I'm including a…
Our friends from the 3D Printing community from all over the world seem to like our famous Dutch Stroopwafels so much I had to create one for them. Now you can have a Stroopwafel when and wherever you like. ;-) You can also use it as a…
Inspired by the delicous stroopwafels from the netherlands I had to make a one euro sized version that can be used as a shopping cart token. Happy printing and enjoy.
Made for Saitek PRO rudder pedals. The standard pedals are to small and the angle dont fit a real simmers gamesetup. V1: For those who fly from an officechair, i pedals which just bolt on to the Saitek PRO, to get the bigger pedals and…
Bring a little 80s nostalgia to your drinks with this Eggo waffle-inspired coaster featuring classic “Stranger Things” lettering! This coaster is designed with a waffle grid texture and a bold logo-style text detail that makes it perfect…
Just added a drain hole for water
A 50 gram 10x10x1.5 cm waffle with 36 holes. Takes 3 hours to print on ender 3. Print settings no supports
Holds an 8" silicon wafer for display
I wanted to make my own threads in tinkercad and they worked pretty good. A friend gave me the idea for a waffle container, so I found a waffle and made it into a container(jar?).
Made for Saitek PRO rudder pedals. The standard pedals are to small and the angle dont fit a real simmers gamesetup. Angle is raised 15 degrees, but im about to increase that to 20. For those who fly from an officechair, there will be…
Morph Waffle Fidget (Small!)
When my kids were younger they loved to play with Waffle Blocks, usually taking up much of the living room. I recreated the experience in miniature as a desk or coffee table size toy. I recommend the "Tiny Surprise Egg" models printed at…
A coaster that look like a waffle. It fits with my last model from Plant Pot contest. Enjoy.
Adjust the printing size for glasses. Its a bit small.
An extended height version of a waffle plant pot. It looks like it could have been an apple plant pot and looks very nice on your desk. Category: 3D Printing
I just combined the two waffle halves for quicker and easier printing and to save the gluing step. Works great. And thanks to Da_Rius for such an amazing model.
/!\“This model contains a historical Wehrmacht symbol.”
This is a Display Stand for a 12 Inch (30 cm) Silicon Wafer On my 30x30cm Printing bed i could print in one piece For smaller printers i did make a 2 piece version that needs to be glued together For printing orientation you just need to…
I always had trouble putting everything away after making an ice cream cone while holding the cone, so I designed my own holder that is printed in vase mode.
I printed it without support (ribs are not visible) ;-) Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
Celebrate love and breakfast with this adorable heart-shaped waffle keychain. My wife loves waffles, and I love her… need I say more? The perfect gift for foodies, waffle enthusiasts, or anyone who wants a sweet touch for their keys. This…
Waffle Stamp/Embosser for baking
A Waffle Iron and waffle for a pretend play kitchen- the waffle is included in the 3MF file. You will need to use a segment of 1.75mm filament to act as a pin in the irons hinge. I added a touch of glue to the openings of the pin hole in…
Mini WAFLE building blocks encourages smart and creative play for kids. Blocks are “puzzles” which can be united together. You can create 2D, 3D models. All is on your imagination. I've created whole model by myself inspired by original…
a waffle dart tip compatible with nerf darts, would recommend to print in TPU
I spent a few hours modeling these because I thought it would be pretty funny. They actually work pretty well though. There are two sizes. one is square and larger to fit square bars of soap similar to Dr. Squatch, and one is smaller and…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Wafflestackarack, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
A hexagon styled wonder wafer holder. Put some double stick tape on the back and place it your heard desires. Wonder Wafers can be found on amazon. Printed on BambuLabs X1 Carbon with no supports with Polymaker Caribbean sea silk Blue…
I call it the waffle adapter. I recommend ABS or ASA to print it from. It's still a work in progress but installed on my CR10V3 and running well now. Requires: 6 brass Heatset Inserts (as used on Voron builds); m3 x 5mm OD x 4mm length. 4…
It's a floppy stroopwafel!! Print it and play with it, but do not eat! Printing Instructions: Layer height: 0.16mm Wall loops: 3 Thank you for your time and consideration on this matter. For those who have joined my club at the “Obsessor”…
Clicky waffle remixed from Super Clicky Oreo Spinner and a design by another creator
Unlock the mysteries of lock mechanisms and enhance your understanding of security with my 3D printable cutaway wafer lock model. Whether you're a lock enthusiast, an educator, or simply intrigued by the world of locks, this model offers…
The hinge pegs eventually broke on my WMB500 BLACK+DECKER Belgian Waffle Maker so I designed new ones in Fusion 360. I've tried other 3D models of hinge pegs but they weren't sized correctly and broke on installation. These snap in and…
A model of a typical dutch waffle filled with a sweet caramel filling, The ‘’Stroopwafel''. For more of the ~Welcome to Holland series be sure to check out the collection: https://www.printables.com/@THop3D/collections/777187 If anyone…
85mm across. Please print on it's face with no supports. I have already oriented it this way.
This is a cover/lid for a Ninja Belgian Waffle Maker Pro . I got one of these as a gift. The vertical design makes it very easy to make waffles, but since I store mine out on the counter, it also means things can fall into the waffle…
Waffle cone themed soda can sleeve (koozie). Includes 2 versions; Flat ice cream drips and sculpted drips. .3mf files of assembled parts, ready to paint .stl files of individual parts. Note: The sculpted drips do not have a flat surface…
Anyone else frustrated by the complexity of the Turtlebot waffle plates? I was, and wasn't able to find any alternative, so here's mine. I made a couple of variations, including a couple of doubled-up variants. Note the original model had…
A mostly perfect copy of the original cleaning and lubricant accessories for Swiss Military Riffle.
Keep your Necco wafers safe from rain and impacts in this handy travel tube. Also suitable for other candies. See it in action:
Waffel Verkaufs Anhänger Bausatz in 1:43
Used for calibrating/viewing bed level in a quick print. Used for my ender to check level of a particular point in the bed via a quick (~20 minute) print.
This frame that I designed is used to mount and display a 12" silicon wafer. I should be noted that the slides were laser cut and that it is still possible to use this design without the front slide. Print Settings Printer Brand: Prusa…
This is a layout of a basic tool used to process silicon wafers into computer chips or other devices. A tool such as this would perform a single step in a recipe consisting of potentially thousands of steps to fully process a batch of…
Contest Entry for MasterLiquid ATMOS Customization. Features a Waffle Maker. This design can be printed all at once (with minimal supports), and features a working hinge. After all these years, you can finally make waffles from the heat…
Print 2 perimeters, 0.2mm layer height, 6 top & bottom layers. Infill 10% or none (check preview.
A life-size, realistic waffle iron – designed just like the real thing! This 3D model was carefully created based on classic 5-heart waffle irons, including all key details. The proportions match real appliances – only this one is…
It can store up to 6 pair of panels. Project link: https://cad.onshape.com/documents/3342b2b3d1ff93c6037e06d9/w/df8e8222e45ecb02c2ed9714/e/d4c59eeb4e44bbda694f6631 printed with no supports with PETG Category: Kitchen & Dining
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height, 15% infill, and supports enabled everywhere. V2 has a rim around the underside so it won't slide off the mug if you move it around.
This is a simple design for wall mounting a 200mm silicon wafer. Q: What is a silicon wafer anyway…??? They are used to create integrated circuits, but some are defective or not used and sold via surplus outlets. Q: Why would someone want…
This is a Sign, printed by manual color exchange (Prusa Slicer). Three Colors: White, Black, Red. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm (or your choice) Infill: 25% (or your choice)…
Bring your favorite designs to life with this high-quality 3D printable LED Light Box STL from GIVEMHEVN . This layered light box is designed to create a clean, professional display when illuminated using an LED light source. The…
After printing, it is worth sanding the blocks
After printing the Luftwaffe style pedals from Svejseko https://www.thingiverse.com/thing:2739648 i felt that the hole at top end bothered me so i made a little addon to fix it. Print two of each part and glue the barrel to the plate with…
After I printed the Pepper Grinder Funnel, I couldn't wait to add additional parts. This PePPeR WaFFle tray provides a clean resting place and place-holder for your beloved, large and messy Pepper Mill. A must have for those of us who…
![Silicon Wafer Frame [12"]](https://media.printables.com/media/prints/176713/images/1657605_7ab2ba3e-41d6-4517-8a6b-db883b903a17/large_display_finished-wafer_176713.jpg)
