P
PrintablesCNC Kitchen
Case for CNC Kitchen Threaded Inserts Soldering Tips (Weller)
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (Weller Style)! CNCKitchen.STORE…
- Pobrania
- 1018
- Polubienia
- 240
- Ocena
- 4,97
Wyniki wyszukiwania: welle
Liczymy pasujące modele…
P
PrintablesClive Harris
Jewellery Tree
Jewellery Tree ,Hang jewellery from branches ,branches have holes for ear rings etc .Tray for smaller bits .Tree and cat glued to tray.Tray has recesses underneath to add weight ,stops unit falling over.I glued steel into recesses 55mm x…
- Pobrania
- 979
- Polubienia
- 265
- Ocena
- 4,93
P
PrintablesJaded Dragon
Crescent Moon Earring/Jewellery Stand by jessjolliffe, remixed for 4 racks
remixed https://www.thingiverse.com/thing:4905821 to have 4 racks and removable base for flat printing. Have not tried to print, hope it works. Holds 40 pairs of earrings or 80 individual earrings.
- Pobrania
- 695
- Polubienia
- 201
- Ocena
- 4,71
P
Printablesso_much_mirrors
Jewellery hanger
I needed something simple so my wife can put her jewellery in one spot, away from cats' paws. Print instructions Print with no supports, any material will do. Prints fit tightly into one another, no need for glue.
- Pobrania
- 605
- Polubienia
- 200
- Ocena
- 5
P
PrintablesHarms3D
Jewellery deer
Modell by TVVGGE from Thingiverse. Just wanted to share here too. Printed the one on the cover in 0.1mm in PETG Prusament Signal White without supports. If I were to print it again, however, I would use PLA instead of PETG.
- Pobrania
- 563
- Polubienia
- 125
- Ocena
- 5
P
PrintablesLink
Breath of the Wild Tears of the Kingdom The Legend Of Zelda BOTW TOTK Forest Dweller’s Sword Full Size (ZELDA ZELDA TOTK TOTK BOTW BOTW ZELDA ZELDA ZELDA ZELDA TOTK)
The forest dweller‘s sword! Some parts need supports and some do not, use your sense. I haven’t printed this yet, if you have any issues PLEASE tell me and I will help you. However, I can’t fix everything so please make sure you will be…
- Pobrania
- 484
- Polubienia
- 180
- Ocena
- 0
P
Printablesmuddymaker
Jewellery Chest
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker I designed a pirates treasure chest for the boys and the…
- Pobrania
- 480
- Polubienia
- 108
- Ocena
- 4
P
Printablesschluppy
Wigo Welle Haken
Die Haken klinken sich auf der Innenseite der Welle ein. Man kann sie auch nutzen, wenn die Fronten drin sind. Gedruckt habe ich sie mit 12 Wänden und aus PETG. Wenn es noch Ideen gibt, was man für Haken und Ösen an den Haken machen kann,…
- Pobrania
- 474
- Polubienia
- 23
- Ocena
- 4,67
P
PrintablesMike2121
Deer Jewellery Box
We saw https://www.thingiverse.com/thing:3375898 and thought this looked beautiful, so we printed it, then my sons girlfriend wanted to turn it into a jewellery box, so I imported it into Tinkercad, cut TVVGGE's base extended it and…
- Pobrania
- 450
- Polubienia
- 90
- Ocena
- 5
P
PrintablesMK_Design
Wellenbahn for a marble run
My childrend wished a track like a wave. Here you can find how it works. https://www.dailymotion.com/video/x79s5pp Update 07.06.19: Second Wave with length 3, and here a video. https://www.dailymotion.com/video/x7ahxk0 Print Settings…
- Pobrania
- 436
- Polubienia
- 85
- Ocena
- 5
P
Printablesdavemoneysign
Dremel To Weller Heat Set Insert Press Adapter
The Dremel 220-01 Mini Portable Drill Press is a fantastic foundation for a heat set insert press, as several other users have already made adapters for them: https://www.printables.com/model/13137-heat-set-insert-press-dremel-adapter…
- Pobrania
- 427
- Polubienia
- 99
- Ocena
- 4,86
P
Printablesbruchsturm
Jewellery Tree with hidden box IKEA Skadis Mount
Found this jewellery tree on Thingiverse and wanted to design a mount for my Skadis pegboard. It uses the Skadis T-Clip System by Will and has 2-3 mounting points, depending on the version. The original was quite small, so I scaled it to…
- Pobrania
- 426
- Polubienia
- 87
- Ocena
- 5
P
PrintablesRoland Deschain
Gridfinity Weller Solder Tip Storage
Get your Prusameters… Post your Makes! If you like this project, please don't forget to ❤ Like and ★ Rate!
- Pobrania
- 421
- Polubienia
- 52
- Ocena
- 4,83
P
PrintablesMLS
Zipper Slider Replacement for Wellensteyn and other #8 two-way-Zippers - Reißverschluss Ersatzschieber für Wellensteyn und andere 2-Wege Reißverschlüsse 8mm
Die Original Slider des Reißverschlusses meiner Wellensteyn-Weste sind gebrochen; somit konstruierte ich in FreeCad neue Slider. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten…
- Pobrania
- 391
- Polubienia
- 39
- Ocena
- 4,67
P
PrintablesEndersen
Carrera Hybrid Bodenwelle
CH_Bodenwelle_x2 2x Drucken Die Strebe wird nicht unbedingt benötigt.
- Pobrania
- 362
- Polubienia
- 21
- Ocena
- 0
P
PrintablesPrint2touch
Wellen-Vase – Sauberes Wellen-Design
Wave Vase – Clean Wave Design Diese elegante Vase wurde im geschwungenen Clean Wave Design entworfen – perfekt für Trockenblumenarrangements oder einfach als moderne Deko für Wohnräume. Die organisch verlaufende Linienstruktur verleiht…
- Pobrania
- 354
- Polubienia
- 100
- Ocena
- 5
P
PrintablesTommy Westside
Weller Soldering Iron Holder for Honeycomb Wall
A simple holder for the Weller Soldering Iron for the Honeycomb wall. No supports needed, prints with minimum infill.
- Pobrania
- 354
- Polubienia
- 49
- Ocena
- 5
P
PrintablesGH2022
Heart Shaped Jewellery Box
A heart shaped jewellery box with a rose on the top. Print Settings Rafts: No Supports: Yes Notes: You will need supports for the lid. Do a filament change to green then again to red Post-Printing May need a bit heat If the lid is tight…
- Pobrania
- 312
- Polubienia
- 46
- Ocena
- 0
P
Printablesfotomas
Weller WE1010 Stand
Put your soldering iron stand on top of the Weller WE1010 main unit to save some desk space. Hooks under the edge above the display, to maintain balance. Mounted using the rubber feet through the printed part into the soldering iron…
- Pobrania
- 285
- Polubienia
- 52
- Ocena
- 4,94
P
PrintablesMax Im
Velux Rolladen 230v Jarolift Wellenantrieb / Adapter
Mit diesen Adapter Teilen und dem Jarolift 230v Motor kann mann jeden Velux Rollladen umbauen. Umgebaut habe ich bei mir das Velux SK06 und FK06, diese betreibe ich nun mit einem herkömmlichen Rolladenschalter und mit einem Shelly 2.5…
- Pobrania
- 281
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJivinace
Double Jewellery Hands (Remix)
A remix of @dgo42_867207 's “Jewelry Hand” model (which itself is a remix of imaterialise 's “Jewelry Hand” model). A two hand jewellery stand with each hand slightly slanted outwards so they are suitable for easy hanging of rings,…
- Pobrania
- 275
- Polubienia
- 28
- Ocena
- 5
P
PrintablesLeonard
Jewellers Vice / Model Making Vice
Jewellers / Model Makers Vice You can rotate the workpiece 360 degrees and tilt over to 40 degrees. The top ring of the base is designed to provide resistance on the ball with out it being fully locked. There is a locking screw on the…
- Pobrania
- 274
- Polubienia
- 137
- Ocena
- 0
P
PrintablesCaro122
Jewellery stand
this is an easy to print low poly jewellery holder for all sorts of jewellery needs
- Pobrania
- 273
- Polubienia
- 56
- Ocena
- 0
P
PrintablesTJ78
Jewellery Stand with Hand and Box, Schmuckständer mit Hand und Ablagefach
Hier ein Schmuckständer für Ketten Ringe und sonstiges Kleinzeug und könnt es skalieren wie Ihr es braucht. Ihr benötigt nach dem drucken noch Kleber. Viel Spaß Ergänzung der 3 Teile als einzelne Objekte Update vom 05.07.2023: Print in…
- Pobrania
- 254
- Polubienia
- 34
- Ocena
- 5
P
PrintablesRoland Daum
NEMA 17 Harmonic Drive; Strain Wave Gear; Wellengetriebe; Ratio ~49:1
The gearbox uses six 7x14x5 ball bearings. Stuff can be mounted to the output gear (transmission) with six M4 bolts, mounted from the inside out. All other components are assembled using M3 bolts and heat-set inserts. The wavegen…
- Pobrania
- 250
- Polubienia
- 25
- Ocena
- 0
P
PrintablesKevFPV
Einbauwerkzeug Wellendichtring
Mit diesem Tool Sitzt der Wellendichtring an richtiger Ort und Stelle und wird nicht zu tief oder zu wenig eingeschlagen ! Tool ist kompatibel mit Verschiedenen Hersteller bzw. Verschiedene Modelle der Hersteller -Piaggio -Aprilia -Gilera…
- Pobrania
- 220
- Polubienia
- 15
- Ocena
- 0
P
PrintablesYumanBeing
Tool Logos #8 (Kobalt, Kreg, Fisch, Weller)
Logos for Kreg, Kobalt, Fisch and Weller If you're looking for a particular logo, let me know and I'll try and get it for you.
- Pobrania
- 220
- Polubienia
- 44
- Ocena
- 5
P
PrintablesPeter Jordan
Weller LR20
Handle replacement. The M6 thread for the cables has to be cut by hand. For the 3 front screws, I heated the heads of the original self-tapping screws and turned them in to "melt" a proper thread form. So the holes are a bit closer, 2mm.…
- Pobrania
- 199
- Polubienia
- 10
- Ocena
- 0
P
PrintablesKamil Rajtar
Jewellery Stand - Earrings wall and box
Combo box for earrings and rest of jewallery addons. Earrings wall as separate part for printing in horizontal orientation and passible to usable individually.
- Pobrania
- 194
- Polubienia
- 48
- Ocena
- 0
P
PrintablesMrObvious
Trinket/Jewellery Drawers
Chest of drawers for storing trinkets or jewellery. Can be printed at a range of layer heights, images shown are printed with the body at 0.3 µm and drawers, feet and handles at 0.2 µm. Print body and all 4 drawers, then print 4x drawer…
- Pobrania
- 190
- Polubienia
- 101
- Ocena
- 0
P
Printablescbo
Holder for jewellery (earrings, chains, rings)
Holder for some earrings. Holders on the back can be used for 5 chains or rings.
- Pobrania
- 187
- Polubienia
- 25
- Ocena
- 0
P
PrintablesNiklavs
Jewellery storage
I added the cutouts in the frame to save on time and material but this will still be quite a long and heavy print. ~9h for the frame ~2h for large drawers (x2) ~1.5h for small drawers (8x). ~0.5h for the hooks. So around 25h of print time…
- Pobrania
- 179
- Polubienia
- 99
- Ocena
- 0
P
PrintablesPapaBravo
Tray Array for Jewellery or other small items
The other half never puts her jewellery away and prefers to sling it all in a small bowl at the end of the day. She then has to fish out the items she needs the next morning. So, I made her this organiser tray array that consists of 17…
- Pobrania
- 176
- Polubienia
- 37
- Ocena
- 0
P
PrintablesDr. Wombatson
Jewellery Gift Box for Valentines Day
Happy Valentines Day! If you need to send flower ,jewellery and little surprise to your girl friend or wife, just make this model and fufill all these things.
- Pobrania
- 176
- Polubienia
- 66
- Ocena
- 5
P
PrintablesDan
CNC kitchen heat insert tool weller gridfinity
Some designs for the CNC kitchen heat insert tool sets are available But I own a weller soldering iron, so I have to use the not so common set. That‘s the reason I designed this box. below the base piece there is a cavity which allows for…
- Pobrania
- 173
- Polubienia
- 36
- Ocena
- 5
P
PrintablesBenBreaksThings
Gridfinity Weller Silicone Soldering Tip Cleaner Holder
Bought the Weller tip cleaner, didn't want to remove it from the fancy silicone, so into the Gridfinity it goes! Includes the raised inset on the bottom of the container to help keep it in place.
- Pobrania
- 171
- Polubienia
- 23
- Ocena
- 5
P
PrintablesDust
Jewellery box insert or tray
Designed as a simple jewellery box insert or tray. To replace the one that was stolen by thieves! :( openscad source is included in case someone wants it as a base for something else.
- Pobrania
- 165
- Polubienia
- 18
- Ocena
- 4
P
Printablesspezialuniversal
Wellensittich, Hexa Sculpture
Wellensittich, Hexa Sculpture
- Pobrania
- 165
- Polubienia
- 24
- Ocena
- 5
P
PrintablesFranks3y
Squiggle Jewellery / Jewelry dish
A fun pie dish shaped jewellery dish. Printing and Assembly The dish shown in photos was printed at 0.2mm layer heights using a 0.4mm Nozzle. It should print well with larger nozzles, although the crisp edges may become more rounded.…
- Pobrania
- 163
- Polubienia
- 31
- Ocena
- 5
P
PrintablesLibor Škaroupka
Jewellery Tree Stand
This Jewellery Tree Stand consists of 3 parts. NO SUPPORTS OR GLUE NEEDED!!!
- Pobrania
- 162
- Polubienia
- 32
- Ocena
- 3,75
P
PrintablesMartijn Janssen
Weller WE1010 soldering station holder
I was looking for a way to move/store my Weller WE1010 soldering station, without moving the 2 parts individually. So I created this simple solution. Print with 4 walls and 42% infill minimally, as the left part is quite heavy.
- Pobrania
- 159
- Polubienia
- 27
- Ocena
- 5
P
PrintablesArtim
Jewellery hanger/stand (earring)
Printed in 0.2mm White Nebula PLA No supports needed Printed on Elegoo Neptune 3 Pro
- Pobrania
- 159
- Polubienia
- 36
- Ocena
- 5
P
PrintablesMunky666
Endeavor - Deep Sea | Die Tiefsee | 1st Player Token | Startspieler | Welle | Wave
Replacement for Endeavour Deep Sea Cardboard 1st Player Token Print with support for Wave Inlay on print plate side Inlays may fit without glue.
- Pobrania
- 158
- Polubienia
- 12
- Ocena
- 0
P
PrintablesLayers Studio
Simple Jewellery Tree Hanger
This modern, simple jewellery tree hanger is the perfect storage solution for necklaces. It is 3D printed and made of wood, giving it a stylish and sleek look. It is designed to keep necklaces secure and organized, perfect for any bedroom…
- Pobrania
- 156
- Polubienia
- 40
- Ocena
- 0
P
PrintablesCNC Kitchen
Case for Weller ET Heat-Set Inserts Soldering Iron Tips
3D Printable case for the CNC Kitchen Weller ET Heat Set Insert Soldering Iron Tips. (GLOBAL - shipped from Germany)…
- Pobrania
- 152
- Polubienia
- 39
- Ocena
- 4,33
P
Printablesmuddymaker
Coffin Jewellery Box
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Coffin Jewellery Box. You'll need 4 8x3mm neodymium magnets.…
- Pobrania
- 152
- Polubienia
- 54
- Ocena
- 0
P
PrintablesTomtom5893
Mechanical Jewellery Box
I designed this jewellery box to resemble a carousel. When you turn the little ball on the top of the “tent”, the four drawers will slide out from the sides. Ideal for storing a few small items like rings and small neclaces. Here's a tip:…
- Pobrania
- 148
- Polubienia
- 63
- Ocena
- 0
P
PrintablesMax Mühlstädt
Stopfen Abtriebswelle Simson
Stopfen für die Abtriebswelle der Simson Motoren. Gedruckt wurde dieser Stopfen aus TPU um eine gute Abdichtung zu erhalten. Wenn euch das Modell gefällt, dann liked es gerne oder speichert es euch in euren Kollektionen. Über einen…
- Pobrania
- 147
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDecal Delight By Mia
Keyring/Jewellery Display Stand
I designed this when I was struggling to find a way to display handmade keyrings at craft shows. But could be used for hanging necklaces or bracelets as well. The top piece has a slit in it to be able to place a sign on top to display…
- Pobrania
- 139
- Polubienia
- 21
- Ocena
- 0
P
Printablesfalcon14141
Stealthpress for Weller WXP80 with a lot of other mods
My own take on Stealthpress mods
- Pobrania
- 137
- Polubienia
- 32
- Ocena
- 5
P
Printablesryanba
Copenhagen Round Tower - Jewellery Box
A jewellery box / small container made to look like the Round Tower in Copenhagen, complete with its internal spiral slope. To print: For all 4 parts (RoundTowerBody, RoundTowerObservatory, RoundTowerRoof, RoundTowerPin): 20% infill 0.4mm…
- Pobrania
- 136
- Polubienia
- 21
- Ocena
- 0
P
Printablesmuddymaker
Crystal Jewellery Stand
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Crystal Jewellery Stand. Step file included for those that…
- Pobrania
- 132
- Polubienia
- 51
- Ocena
- 0
P
Printablessouthbaygsr
Jewellery Box Divider and Tray for Ear Rings
The divider can sit in the bottom of the drawer and the trays can stack on top. The dimensions are 211mm x 100mm x 11mm tall. 0.3mm, PLA, Sovol SV01
- Pobrania
- 131
- Polubienia
- 20
- Ocena
- 0
P
PrintablesDr-Mtn
Betonschwellen / Concrete tie - H0
Betonschwellen / concrete tie (Scale H0) Similar to B70, but with a different size scaling. (The sleeper is thicker, due to better visibility.) Printable with a 0.4 nozzle and filament setting "optimal". For high details (sink holes) a…
- Pobrania
- 131
- Polubienia
- 6
- Ocena
- 0
P
Printablesrav
Jewelry Jewellery stand display shelf
Print 1x base and 3x peg - depending on your printer pegs may need a drop of super glue... or not :)
- Pobrania
- 130
- Polubienia
- 49
- Ocena
- 0
P
PrintablesMathis
Jewellery (Schmuck)
Box für Uhren, kette, Ringe und schmuck. Kann aber auch für andere nützliche Dinge als verstauraum genutzt werden.
- Pobrania
- 114
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTurgon
Jewellery Stand / Necklace holder
No supports or glue are needed. Jewelry stand designed to hold long necklaces. It is 25 cm tall in total, with a 20 cm base and a 15 cm top section. It is designed to hold 18 hooks, allowing for 18 necklaces.
- Pobrania
- 111
- Polubienia
- 16
- Ocena
- 0
P
Printablesolivvybee
Stud Earring Insert for Stackers Jewellery Box Classic Trinket Layer
This is a small tray insert for the Stackers jewellery box Classic Trinket layer, for holding stud earrings. Each tray fits exactly into one of the compartments and can hold 4 large pairs of stud earrings or more if the earrings are…
- Pobrania
- 111
- Polubienia
- 32
- Ocena
- 5
P
PrintablesEivind Husby
Weller WE1010 Multiboard Shelf
I'm trying to clear as much desk space as possible, so I made this shelf to get my Weller WE1010 out of the way, but still being close enough to use it without moving it. It uses the Multiboard 6x6 Push-Fit Bracket upside down, with small…
- Pobrania
- 111
- Polubienia
- 28
- Ocena
- 5
P
PrintablesClearMindCasting
ClearMindCasting Jewellery Resin Calibration Object
Yet another resin calibration object, hopefully we don't need these some day. -Designed specifically for jewellers to slot stones of 6mm, 5mm, 4mm, 3mm, 2mm, 1.5mm, and 1mm and test exactly how accurate a resin print will be in reality.…
- Pobrania
- 110
- Polubienia
- 6
- Ocena
- 0
P
Printablesjh247247
Gridfinity stackable weller solder spool holder
I got annoyed at all the spool holders not being stackable so I made my own. This is a 2x2 unit gridfinity bin 10 units high. For compatibility check that your spool has these dimensions: 65-66mm outer diameter (mine is 65.75mm) 20-21mm…
- Pobrania
- 110
- Polubienia
- 20
- Ocena
- 5
P
PrintablesTanja Smirnov
Modern Planter Plant pot bowl Pflanzentopf rund Eckig wellen
Easy to Print, standart settings made with PLA Bamboo beige
- Pobrania
- 107
- Polubienia
- 27
- Ocena
- 0
P
PrintablesBoda
Weller TCP hack
Weller TCP Hack Replacing the faulty magnetic switch in a Weller TCP is a costly affair, this project is a workaround for just that. The upgraded soldering iron has a thermocouple sensor and triac heater control. Optionally, the…
- Pobrania
- 106
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWidsa
Gayer-Anderson Cat Egg cup/ Jewellery holder
Reworked the 3d model from Scan the wrold: https://www.myminifactory.com/object/3d-print-gayer-anderson-cat-at-the-british-museum-london-4010 Added cup to be used as an egg cup or Jewellery holder. Please note for egg cup you will need to…
- Pobrania
- 105
- Polubienia
- 18
- Ocena
- 0
P
PrintablesTheRealTurtler
Mikrowellenregler / microwave control knob
This control knob was designed as a replacement for my mother's microwave. The original had a spring steel ring at the end, which i wanted to reuse to add some stability and strength, that's why the middle cylinder is narrower at the top.…
- Pobrania
- 105
- Polubienia
- 3
- Ocena
- 5
P
PrintablesDustinTRC
Antriebswellen verbesserung für Axial SCX 10 III / drive shaft improvement for Axial SCX 10 III
DE Beschreibung: Passend für das Axial SCX 10 III Chassis. Eine verbesserung für die AXI232017 Wild Boar Antriebswellen. Das Mittelstück wurde so lang wie möglich gemacht um die Kraftübertragung zu verbessern. Die Antriebswellen sind im…
- Pobrania
- 103
- Polubienia
- 12
- Ocena
- 5
P
PrintablesPatrick
Weller WMRP Soldering iron stand
cover for the Weller WMRP Soldering iron stand
- Pobrania
- 102
- Polubienia
- 11
- Ocena
- 0
P
PrintablesAlessandro
Gridfinity Weller soldering sponge 2x2 bin
Gridfinity bin for the Weller soldering sponge
- Pobrania
- 102
- Polubienia
- 19
- Ocena
- 5
P
PrintablesAndrew Keyser
Brass Sponge Holder for Weller PH 70 Safety Rest (WE1010NA & others)
This is an insert for the Weller PH 70 Safety Rest that holds a Weller Soldering Brass Sponge cleaning pad. Easily transform your Wet Sponge-style cleaning pad into a Brass Sponge-style cleaning pad. Model is available in two versions:…
- Pobrania
- 100
- Polubienia
- 20
- Ocena
- 5
P
PrintablesD33DOz
Trinket Tray | Jewellery holder - Heart
This is a design for a Trinket Tray. Re-size as necessary. 3 Models attached. You can customise these by selecting "Add part" on your slicer and adding Text and centring it. See pictures for example. For private use only. For donations or…
- Pobrania
- 98
- Polubienia
- 10
- Ocena
- 0
P
PrintablesNacimota
Tip Holder for Weller ET Series
This is a little holder/organizer I made for my soldering iron tips. It's designed to fit up to 8 Weller ET series tips. It's possible that other tips will fit as well, but I have not tested them. It goes without saying that if you (for…
- Pobrania
- 98
- Polubienia
- 8
- Ocena
- 5
P
Printablesvisualglitch
28mm vault dweller for tabletop
28mm vault dweller for tabletop
- Pobrania
- 98
- Polubienia
- 3
- Ocena
- 0
P
Printablesklingele28
Gravitrax Doppelwelle Schiene
Verbindungsschiene für Gravitrax Bahn mit welligem Verlauf. Überbrückt eine Länge von 235mm und bietet die Möglichkeit Schienen auf gleicher Ebene zu kreuzen. Gedruckt in PLA. minimale Stützstruktur erforderlich im Bereich der Haltenasen.…
- Pobrania
- 92
- Polubienia
- 11
- Ocena
- 1
P
PrintablesHaggiwatt
- Pobrania
- 91
- Polubienia
- 9
- Ocena
- 0
P
PrintablesSpitblood08
Weller Bourbon Coaster
.3mf is included with it precolored, but its easy enough to just paint by height and do a color change once you get to the lettering. colors i used were SUNLU Matte PLA Olive Green and Esun Silk PLA Copper
- Pobrania
- 90
- Polubienia
- 9
- Ocena
- 5
P
Printablesm3_manti-maker-man
Lötspitzenreiniger / Tip cleaner für/for Weller
Ich habe den Lötspitzenreiniger von topenjoin so angepasst, dass er perfekt in die Schwammablage meiner Weller WE1010 Lötstation passt. So kann ich bei Bedarf zwischen Schwamm und Metallgewebe wechseln und der Halter rutscht nicht auf dem…
- Pobrania
- 90
- Polubienia
- 10
- Ocena
- 4,5
P
Printables3D Print Fun
Keyring or Jewellery Stand with hidden magnets
I needed a holder/stand for my keyrings, so I came up with this idea and made it with hidden magnets so that it could be put together with little effort. No clue is needed. Only some support for the "arms". I have printed it in PETG for…
- Pobrania
- 87
- Polubienia
- 8
- Ocena
- 5
P
PrintablesLuis Manuel Ramirez
Dremel Station Soldering Iron Adapter for Weller WLIR3012A
Weller WLIR3012A adapter. It works with the original bolts.
- Pobrania
- 86
- Polubienia
- 25
- Ocena
- 4,67
P
PrintablesPotato Stardust
Weller WES51 under desk mount
A simple bracket to mount my soldering iron under my desk. *** Added STL file
- Pobrania
- 83
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRixxn
George Russell F1 Pose Jewellery Hanger
This jewellery hanger showcases George Russell in one of his well-known celebratory or race-ready poses, transformed into a sleek, minimalist accessory stand. The design incorporates hooks and slots strategically placed along the…
- Pobrania
- 82
- Polubienia
- 2
- Ocena
- 0
P
PrintablesThael
Sphericon - mathart sculpture or jewellery (pendant, bracelet)
Print Settings: Layer: height:0,2 perimeters: 3 solid layers: top4 bottom4 Infill: 10% Support:none Advanced: extrusion width: default: 0,45 first layer: 0,45 perimeter: 0,45 external perimeter: 0,45 infill: 0,4 solid infill: 0,7 top…
- Pobrania
- 81
- Polubienia
- 17
- Ocena
- 0
P
PrintablesSDio
Crystal Ore - Jewellery Ring Holder
A basic jewellery & ring holder with crystal ore design
- Pobrania
- 79
- Polubienia
- 23
- Ocena
- 0
P
PrintablesPasi
Weller PU81 Stand
In order to better utilize space in the workshop, I have created a storage surface for the Weller soldering station. I printed my model in TPU to eliminate any rattling, but any other material should work just as well.
- Pobrania
- 79
- Polubienia
- 14
- Ocena
- 5
P
PrintablesLayersLab
Foldable Jewellery Organiser
Foldable Jewellery Organiser Jewellery organisers come in two versions. Each design is stored in its own folder and the main difference lies in the first box containing a jewellery-holding panel while the other has space for a mirror…
- Pobrania
- 77
- Polubienia
- 72
- Ocena
- 4
P
PrintablesSauraj Rathod
Jewelled Hair Pin
This is a circular Hairpin with a jewel like shape on the end.
- Pobrania
- 77
- Polubienia
- 28
- Ocena
- 0
P
Printablesdeuteranomalous1
Gridfinity Weller Solder Tip Holder 4x4
Needed a solution to store my spare tips in my new Gridfinity organized soldering stuff drawer. Worked out really well so figure I should share it.
- Pobrania
- 76
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHaschee
Seitenschweller, Mammotion Luba Mini
Um das ständige Einfädeln an Sträuchern und Büschen zu verhindern, wurden diese Seitenteile geplant, welche an der Stoßstange montiert werden. Um einen besseren und sicheren Halt zu gewärleisten, werden noch Schmelzhülsen und Schrauben…
- Pobrania
- 75
- Polubienia
- 7
- Ocena
- 5
P
Printablesray of sunshine
Weller WE1010 Soldering Iron Tip Caddy Backpack for Base. Holds 9!
Built to match the form factor of the soldering iron holding base for a complete look. Material, fill percent, and layer height are flexible. The copy shown was printed in PETG with 0.35-mm layer height and 50% fill. The holes as printed…
- Pobrania
- 74
- Polubienia
- 15
- Ocena
- 4,8
P
Printables3D-Print Brehm
PRUSAMENT Refill Einschraubwelle mit 35 mm Loch für PRUSA Rollenhalter
wie ich in den Bewertungen von PRUSAMENT Refill gelesen habe, kann die Filamentrolle auseinander gehen, wenn die Spannung durch das Aufwickeln zu gross sind. Aus einem früheren Projekt bei mir habe ich diese Welle konzipiert, für die ich…
- Pobrania
- 73
- Polubienia
- 20
- Ocena
- 5
P
PrintablesNeil Ramsay
Jewellery / Jewelry 2.35mm rotary bit holder
A holder for up to 60 2.35mm rotary bits. Space beneath each for a 12mm high label (standard Ptape) for organisation. Comes in two versions: the basic bit holder the bit holder with a lip and a lid.
- Pobrania
- 72
- Polubienia
- 17
- Ocena
- 0
P
PrintablesDerek Stice
Carriage for Fully 3D Printed Heatset Press for Weller WLC100 Iron
I merged the carriage from both these designs to create a carriage that would support a WLC100 and work on the fully 3D printed press.
- Pobrania
- 69
- Polubienia
- 25
- Ocena
- 0
P
PrintablesNeil Ramsay
Paintbrush, Pencil, or Jewellery files holder with rotating base addon
This is a 9-sided tool holder (why 9? Why not!) that I designed specifically for separating out my jewellery files into identical cuts, but it could be used with anything, really. Pencils, wood files, paintbrushes… anything that would fit…
- Pobrania
- 68
- Polubienia
- 4
- Ocena
- 0
P
Printablesgrosi
Simple Jewellery Stand
I designed this jewellery stand for my wife. It is possible to use some cork or similar to improve the look and feel. Print settings 0.4 nozzle 0.2 layer height 4 wall loops only little support for the joint (see screenshot) tested with…
- Pobrania
- 67
- Polubienia
- 13
- Ocena
- 4
P
Printables3D-Print Brehm
PRUSAMENT Refill Einschraubwelle mit M12 Loch
wie ich in den Bewertungen von PRUSAMENT Refill gelesen habe, kann die Filamentrolle auseinander gehen, wenn die Spannung durch das Aufwickeln zu gross sind. Aus einem früheren Projekt bei mir habe ich diese Welle konzipiert, für die ich…
- Pobrania
- 67
- Polubienia
- 18
- Ocena
- 5
P
Printablesnfroehberg
Adapter for Silicone Brass Sponge Holder for Weller PH 70 Safety Rest (WE1010NA & others)
Adapter to integrate Weller silicone holder for brass sponge into PH 70 safety rest for soldering iron.
- Pobrania
- 67
- Polubienia
- 7
- Ocena
- 5
P
PrintablesPakoke
Tree jewellery hanger
Jewellery tree like hanger, printable without supports, easy to assemble,
- Pobrania
- 65
- Polubienia
- 12
- Ocena
- 0
P
PrintablesTirthak
Jewellery Organiser
Can display 15-16 Pairs or earrings and 18 necklaces, remaining things can be divided in the compartments below
- Pobrania
- 64
- Polubienia
- 24
- Ocena
- 5
P
PrintablesChris Huab
Removable Spool and Tip Caddy for Weller WLC100
Spool and Tip caddy for the Weller WLC100 soldering station. Can serve as a standalone spool holder when you're soldering, then seats nicely back on the station when you're not! 3 Versions available: Normal (Solder Tips Only) .58 in…
- Pobrania
- 63
- Polubienia
- 16
- Ocena
- 5
P
PrintablesFDMBRO
WELLER SOLDER TIP HOLDER (RTU, RTP, RTM)
Just a simple and extended Weller Solder Tip Holder for all "RT" Solder Tips. Like RTU, RTP and RTM. The original Part Number is T0053450299. I printed in PETG. So you can Print the Material you want. 15% Infill 3 Walls, 3 Top and 3…
- Pobrania
- 63
- Polubienia
- 8
- Ocena
- 0