NEMA 17 Harmonic Drive; Strain Wave Gear; Wellengetriebe; Ratio ~49:1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable harmonic drive
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 261
- Wydruki
- 0
- Wyświetlenia
- 1925
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
The gearbox uses six 7x14x5 ball bearings. Stuff can be mounted to the output gear (transmission) with six M4 bolts, mounted from the inside out. All other components are assembled using M3 bolts and heat-set inserts.
The wavegen currently adopts for a LEGO technic axis, but easily changed for a NEMA 17 shaft. Both have roughly the same diameter.
The entire gearbox is modeled with standard tolerances (~±0.25 mm) and fits perfectly without any scaling adjustments on a Creality Ender 3 V3 SE.
The flexgear is printed in standard TPU, while all remaining parts are printed in PLA+.
Print settings:
Speed: 100 mm/s
Layer height: 0.1 mm
