Liczymy pasujące modele…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Also check the model out on MakerWorld for BambuLabs printers print-profiles! Update 6th May 2023: Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…
Wydruk około 2,82 €–3,44 € nettoWstępna wycena jednego wariantu
Complete list of parts and 3d models used to create your own Hydroponic Tower: https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts Today i'm putting together a 3d printed modular hydroponic tower garden. It's an…
Wydruk około 4,87 €–5,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…
Wydruk około 10,35 €–12,65 € nettoWstępna wycena jednego wariantu
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
Wydruk około 12,19 €–14,90 € nettoWstępna wycena jednego wariantu
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
Wydruk około 6,77 €–8,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🇫🇷 Bienvenue à Paris! Welcome to Paris! The Eiffel Tower in Paris has become a timeless symbol of romanticism and " la vie en rose" . It is not only an icon of the city, but of all France and also our representative of Europe in the…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
JERRARI3D.com The Gen2 Parts Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. These parts drawers feature divided…
Wydruk około 8,38 €–10,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The StageTop Dice Tower is a free sample from our crowdfunding campaign for StageTop: The 3D Printed Gaming Table . While made to work with StageTop Gaming Tables, this Dice Tower can also be used by itself and is guaranteed * to improve…
Wydruk około 12,71 €–15,53 € nettoWstępna wycena jednego wariantu
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
This temp tower will start at 230 degrees Celsius and will end at 190 degrees. It's better to print with a higher temperature at beginning and go lower. I added a new file with temperature from 230 to 200 degrees. You can use this file to…
Wydruk około 1,85 €–2,27 € nettoWstępna wycena jednego wariantu
🌹 Rose Flower Decor – A sleek and timeless rose, perfect for romantic interiors, gifts, or seasonal setups. Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – classic & elegant ✅ Part of my ornamental flower…
Wydruk około 2,55 €–3,11 € nettoWstępna wycena jednego wariantu
Please don't forget to like the model if you find it useful. Thanks!
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
On the Original Prusa XL , adjusting the belt to the optimal tension is crucial to achieving good quality on the prints. Here is a detailed guide .
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Advancent error planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
Please take a moment to like this project and download it from Printables - it really helps me out! Thank you Today we’re making some of these awesome customisable desktop neon signs. These ones can be powered by either a USB cable or 4 x…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Strong shower door hook for all your towels and accessories :)
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…
Wydruk około 2,70 €–3,31 € nettoWstępna wycena jednego wariantu
Info I designed this drawer so that it perfectly fits on my Prusa MK3S+. If it doesn't fit on your printer you can just scale it down (or up). It has a smooth sliding rail to give you perfect access to all your stuff currently lying…
Wydruk około 5,57 €–6,80 € nettoWstępna wycena jednego wariantu
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Desiged this tower in freecad after the model of already existing examples
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
A tricky tower with a secret compartment and modular maze. https://youtu.be/VesEei_Eg8Y Printing No supports required Add a brim if curling or bed adhesion is an issue Requires accurate printing within +/- 0.2mm, or sanding may be needed.…
Wydruk około 10,36 €–12,67 € nettoWstępna wycena jednego wariantu
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Included is a ready-made gcode for Ender 3 V2 temp tower for PLA. Bottom layer (below the test tower) is at 205 to ensure adhesion as print starts. E-Steps are set for my extruder, change line 21 in G-Code to your extruder's E-Steps.…
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
Can be printed as is, without supports The design itself is based on the model by Juliuis3E8 on thingiverse. Main difference is that my design is a single piece print and I added some minor tweaks (like the windows) and an extension of…
Wydruk około 14,19 €–17,35 € nettoWstępna wycena jednego wariantu
Bowser Spikey Shell. Updated: 1/1/2024: Also removed piggy bank version. May or may not put up a new piggy bank version.
Wydruk około 9,29 €–11,35 € nettoWstępna wycena jednego wariantu
A three piece sunflower cookie cutter. The three piece design allows you to achieve the desired impression depth in the middle part regardless of the thickness of the dough. Or you can cut out the center part completely and swap it…
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
"Building a tower is an art. Building the tallest tower is a masterpiece! Take it from a wisard." - Saruman the White - Here's a remix of the fabulous "Dice Tower Castle Stairs" by Squinn , for players who want to touch the sky (or for…
Wydruk około 8,95 €–10,94 € nettoWstępna wycena jednego wariantu
A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…
Wydruk około 0,81 €–1,00 € nettoWstępna wycena jednego wariantu
Flower Crown. Enlarge or shrink as Needed. Made it thick enough to shrink a bit. (flowercrown5 and 6) Still not thick enough Tested with organic supports. Worked well. Added Flowercrown.obj/.3mf and new gcode for a thicker version.…
Wydruk około 18,18 €–22,21 € nettoWstępna wycena jednego wariantu
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
A very nice and modern indoor or outdoor flower/plant pot - easy to print in 2 or 3 layer vase mode. Your plants will love it! Happy printing! :)
Wydruk około 8,84 €–10,81 € nettoWstępna wycena jednego wariantu
Dragon Dice Tower. New Version is Up. (11/12/2024) 2:13 PM (CMT) fixed bottom, enlarged exit door, and added dice ramp.
Wydruk około 11,16 €–13,64 € nettoWstępna wycena jednego wariantu
Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Print with z=0.3 PLA or PETG Put in flowers, pencils, sweets or…., love. W
Wydruk około 10,88 €–13,30 € nettoWstępna wycena jednego wariantu
JERRARI3D.com The GEN2 Open Bin Lack Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. Where the GEN2 Open Bins…
Wydruk około 5,72 €–6,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Wydruk około 13,60 €–16,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…
Wydruk około 23,64 €–28,90 € nettoWstępna wycena jednego wariantu
I needed simple hook for towels and other shower accessories. You can change the height of glass in attached .f3d file.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.
Wydruk około 12,78 €–15,62 € nettoWstępna wycena jednego wariantu
Butterfly with flower design Suitable as home decoration, wall art or coaster under your cup Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height…
Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu
Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…
Wydruk około 12,31 €–15,05 € nettoWstępna wycena jednego wariantu
Building on the awesome job of @Tronic with the Temp Tower, I have remixed one suitable for the Prusa XL. The supplied G-Codes are sliced using PrusaSlicer 2.6 Release Candidate 1 at 0.15 layer height using all stock Prusa Profiles for…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Wall art vase with flowers
Wydruk około 7,05 €–8,61 € nettoWstępna wycena jednego wariantu
Imprints clay with a beautiful abstract flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Details: Available for glass panes with the thickness of 6mm, 8mm, 10mm, 1/4", 3/8" and 1/2". All models available as STL and STEP file. All models have a 0.1mm extra tolerance in the thickness. Print flat for maximum strength. No…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
🛠 Universal Add-On Drawer for Desks or Shelves – Multiple Variants Expand your storage space with style and practicality! This 3D-printable drawer is designed to mount under a desk or shelf, making it a perfect addition to offices,…
Wydruk około 2,30 €–2,82 € nettoWstępna wycena jednego wariantu
Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…
Wydruk około 9,67 €–11,81 € nettoWstępna wycena jednego wariantu
I created this modular drawer organizer to maximize space in my drawer as compared to a store bought one. The total length was too long for my ender 3 print bed so each tray is split in half and joined together using a piece of 1.75mm…
Wydruk około 7,76 €–9,48 € nettoWstępna wycena jednego wariantu
Don't you just hate it when you keep accidentally switching off your light pad? Fear no more, this power button cover will spare your frustrations! This can be printed in place, face down on the bed. Recommended layer height 0.2mm. Pro…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These nozzles feature the usual ½ inch (ISO228) thread that fits on most shower hoses. They create a very pointed and strong water jet that lets you power-wash the outlet of your shower or bath tube. The credit for the idea to print this…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
Wydruk około 3,31 €–4,04 € nettoWstępna wycena jednego wariantu
Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! My first PETG prints in 100 and 100.5% scaling were unfortunately not a success. They were too tight and did not fit. Update 04/23/23: Then I scaled…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Within this box fits a Shelly Plus (1, 1PM, 2PM) and two WAGO 221 connection clamps for easy cable connection. Cables are secured by two printed cable clamps. I used threaded inserts from ruthex in size M3 for the screws. (For Shelly Plus…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Size: 100mm
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Original model was designed by chendragon2099. Body is prepared for MMU2S. Filament 1: Body; Prusament PLA Galaxy Black Filament 2: Face + Tail + Belly; Prusament PLA Vanilla White Filament 3: Beak ; Prusament PLA Lipstick Red The drawer…
Wydruk około 8,54 €–10,44 € nettoWstępna wycena jednego wariantu
Adjust temperature settings for enhanced print quality and stability. Temperature Optimization: fine-tune the temperature settings to ensure optimal adhesion and layer bonding throughout the print. Expanded Temperature Range: Explore…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
ein Moosstab der wie ein Mittelalter Turm aussieht
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A very nice and traficional pot or planter for your plants. Easy to print in 2 or 3 layered vase mode settings. Prefered print material - PLA Happy printing!
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Advancent steam core planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Added base, connected gate, cutted few floors. v2.0 - Bigger exit gate so it will not block more dices. Smaller gate for better view for dices.
Wydruk około 15,80 €–19,31 € nettoWstępna wycena jednego wariantu
Can be printed with vase mode. I recomend use some coating when you print it with vase mode. (for example hair spray) PETG or PLA nozzle 0.4mm extrusion widht 0.8 or waterproof pot in vase mode
Wydruk około 4,91 €–6,00 € nettoWstępna wycena jednego wariantu
The Ultimate Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a version with…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Test your filaments to find the best printing temperature. 3mf files for any other printer, just import as project, slice and you should be ready to go!!^^ Ready-to-print G-CODE for Creality CR-10 Smart Pro printers included. Remixed from…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Meet the Articulated Planter Buddy, the most charming addition to your plant family! With its moveable legs, loving heart-eyed smile, and cheerful personality, this planter is perfect for adding a playful touch to any space. Available in…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
My kids love LEGO bricks. Lately, they've become obsessed with flowers. The problem started when the number of flowers kept growing. So, I created a vase that can hold quite a few of them. If you like, you can fill it with sand or pebbles…
Wydruk około 2,38 €–2,90 € nettoWstępna wycena jednego wariantu
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Phone mount for the Concept2 Model-D Rowing Machine. I was not happy with how the other mounts I found placed the devices above the rower display. Felt too high and unnatural to use during a work out. I created this one to mount just…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Electrical Grid Series - Power Station Power is no small commodity in the war for freedom across the bloody wastelands of the home worlds. This is the Electrical Power Station. Guaranteed to generate all of the electrical power your…
Wydruk około 17,55 €–21,45 € nettoWstępna wycena jednego wariantu
This was supposed to be the original model, and the barrel from the previous model was supposed to be alone, but my father placed the barrel on the chassis, so we liked that a separate model was created. The chassis and wheels are…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Here it finally is, the third version of the PRUSAMENT sorting tower. And this time it requires even less filament and have more features! Printing If you just wan to get started printing, just take the G-Codes or the .3mf slicer files…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Store 2 to 10 Nintendo games in a stack, so you can read the labels easily. I designed this in order to be able to print it on a small bed surface like the Prusa Mini: this is why you must print it upside down and not on its back.…
Wydruk około 10,29 €–12,58 € nettoWstępna wycena jednego wariantu
🌷 Tulip Decor – A sleek and elegant 3D printed tulip sculpture, perfect for stylish interiors or seasonal decorations! Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – slim & graceful silhouette ✅ Designed…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stargate Dice Tower! Please leave comments and any recommendations. The base pieces and stargate pieces will need to be glued together. The Stargate should rest on top of the base, and it will sort of lock in place. The Stargate and Base…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
This is another drawer organiser. It is simple and flexible The features are: Customizability. Create your own sized boxes to fit your drawer. The inside edges are rounded for easy cleaning and easy taking out small objects. The outside…
Wydruk około 15,65 €–19,13 € nettoWstępna wycena jednego wariantu
