P
Printablesradekrac
Baby Groot Flowerpot
Layer 0.30 mm, filling 25%, brown PLA painted with acrylic markers, supports on the printing pad
- Pobrania
- 10 117
- Polubienia
- 1654
- Ocena
- 4,94
Wyniki wyszukiwania: werp
Liczymy pasujące modele…
P
PrintablesArtmonso
Indoor FlowerPot
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor. Just glue the head with the body and enjoy it!
- Pobrania
- 2179
- Polubienia
- 586
- Ocena
- 4,85
P
PrintablesExtrutim
Big Flowerpot With Saucer | Planter | Flower Pot | Plantpot With Trivet
This is a large flower pot with drainage holes and a saucer. There is also a coaster on which the pot is elevated so that more water can drain from the pot to prevent root rot. The plates are equipped with a catch so that the pot is…
- Pobrania
- 1620
- Polubienia
- 327
- Ocena
- 4,71
P
PrintablesAndreas G
Collection of Flowerpots/Inner Plant Pots in various dimensions
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
- Pobrania
- 1480
- Polubienia
- 317
- Ocena
- 5
P
Printableselumspe
Yaesu FT-891 Powerpole Conversion
>> This mod may void the warranty! << >> Modify the radio at your own RISK! << Order a kit: Purchase a kit here: https://forms.gle/EGKaYYa485J8wiMW9 Go here for details: https://github.com/N0BOY/FT891_powerpole Enjoy it! - Jason Wang,…
- Pobrania
- 1400
- Polubienia
- 102
- Ocena
- 5
P
PrintablesArgiCZ
Easter Bunny flowerpot decoration
simple easter decoration
- Pobrania
- 1308
- Polubienia
- 193
- Ocena
- 5
P
PrintablesArtmonso
Indoor FlowerPot
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.
- Pobrania
- 1140
- Polubienia
- 242
- Ocena
- 4,67
P
PrintablesOpl
self watering flowerpot
Can be printed with vase mode. I recomend use some coating when you print it with vase mode. (for example hair spray) PETG or PLA nozzle 0.4mm extrusion widht 0.8 or waterproof pot in vase mode
- Pobrania
- 1133
- Polubienia
- 214
- Ocena
- 4,94
P
Printablesvelix
WAVY flowerpot
Hi, A part of my wavy collection, this plant pot is a clean and minimalist way to present your succulents and small plants. Best printed out of petg or other watertight material. This is an outer pot without drainage holes, meant to be…
- Pobrania
- 1007
- Polubienia
- 103
- Ocena
- 5
P
PrintablesPetr Vacek
Design Flowerpot Cover with Voronoi Pattern
Shiny, reflective or translucent materials enhance the look significatnly. Although my prints are water tight, I don't recommend using without inner flowerpot. Print in “vase mode” with 0.8 mm nozzle, 0.3 mm layer height, PETG. Scale to…
- Pobrania
- 886
- Polubienia
- 399
- Ocena
- 5
P
PrintablesLA J
Flowerpot bust ancient greek/roman
3D-Scan of a beautiful flowerpot bust with an ancient greek/roman motive. Best prints with tree support.
- Pobrania
- 692
- Polubienia
- 98
- Ocena
- 5
P
PrintablesEMPChaosFTC5828
Cone element for Powerplay FTC
For people waiting for their elements, here is the STL for the cone in First Tech Challenge's Powerplay. Good luck!
- Pobrania
- 651
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDaniel
E-bike Bosch Powerpack 500 wall mount
The FreeCAD model is available in case you need to change the diameter of the screw holes (M1.4 6mm countersink). The charging cable can be removed without unscrewing the battery holder (which proved to be useful when you need to leave in…
- Pobrania
- 647
- Polubienia
- 56
- Ocena
- 5
P
PrintablesAbolfazl Hosseinpoor
Hands of Harmony Flowerpot
“Experience the beauty of nature held gently in the embrace of art. This unique flowerpot, designed with two sculpted hands, symbolizes care, harmony, and a deep connection to the natural world. Let your favorite plants thrive in this…
- Pobrania
- 617
- Polubienia
- 120
- Ocena
- 4
P
PrintablesBass.Boi
Heavy Duty Pan&Tilt FPV for TowerPro MG90S 180deg metal servo
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
- Pobrania
- 604
- Polubienia
- 47
- Ocena
- 5
P
PrintablesJonathan Perkins
PowerPole connector cable strain relief
Anderson PoperPole connectors are popularly used for Amateur Radio equipment, but for small low power gear the power cables are often small diameter and need some strain relief when soldered to a PowerPole connector. This clip supports a…
- Pobrania
- 590
- Polubienia
- 86
- Ocena
- 4,86
P
PrintablesArtmonso
Indoor FlowerPot
Small flowerpot for cactus commonly found (similar pieces) on Amazon, now you can print them! I recommend to print with 150% of scale factor.
- Pobrania
- 581
- Polubienia
- 125
- Ocena
- 5
P
PrintablesPhil6681
Flowerpot Blumentopf
Just a late night project that I did to get a little better in onshape. The version that I printed was at 60% size, which is why some details don't really show. Hope it gives your flowers the additional touch, they might have needed…
- Pobrania
- 540
- Polubienia
- 37
- Ocena
- 5
P
PrintablesJasonCharlton
Anderson Powerpole Panel Mounts
These printable brackets allow you to panel mount Anderson Powerpole connectors in various configurations - from a simple 2x1 configuration (red/black power), to an 8x2 block (for what purpose, I have no idea, but if you need it, here it…
- Pobrania
- 527
- Polubienia
- 84
- Ocena
- 5
P
Printables3D patlal
Ring lamp - statue / flowerpot stand
Illuminated stand for a statuette or flower. Used RGB tape. Easy to print. Two series of diodes used. Cut and soldered. Problem: Used cheap RGB tape - short power cable. When the wireless receiver is inside the stand, the signal range is…
- Pobrania
- 512
- Polubienia
- 177
- Ocena
- 5
P
Printablesncsandor
Pyrite Flowerpot with Tray
Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
- Pobrania
- 507
- Polubienia
- 98
- Ocena
- 4,6
P
PrintablesSoskat
Pokemon Ivysaur Flowerpot
Ivysaur Flowerpot This is a remix of this Bulbasaur pot created by Openjuy . I made it for my friend who wants to enlarge his family of adorable Bulbasaurs pots. The design has not been tested yet, however it should be printed in one…
- Pobrania
- 503
- Polubienia
- 105
- Ocena
- 5
P
Printableseurad
Balcony Garden: Self-watering flowerpots/planters for balcony railings (parametric)
Flowerpots/Planters to fit between the rails of our balcony railings. OpenSCAD file is included so you can easily make it fit yours! There are two variants of the pot (measures in mm ): a smaller one that fits between two rails:…
- Pobrania
- 487
- Polubienia
- 337
- Ocena
- 4,6
P
PrintablesRob W1RCP
Anderson Powerpole Chassis Mount (for 2 stacked connectors) Updated 3-15-2025
Back in the day, I wanted to mount two Anderson Powerpoles into a sea-bird-like case from Xiegu. I didn't want to spend $27usd on one of these when a few minutes of designing would lead to a $0.75usd 3D print. Drill a hole just slightly…
- Pobrania
- 484
- Polubienia
- 60
- Ocena
- 4
P
Printablesradekrac
Olaf flowerpot
Layer 0.20 mm, filling 25%, white PETG painted with acrylic markers, supports on the printing pad.
- Pobrania
- 472
- Polubienia
- 69
- Ocena
- 5
P
PrintablesMartinL
Magnetic Flowerpot
This flowerpot was designed for growing of little herbs directly on your fridges. Dimensions 50x45x28 Used magnet dia.10 _5mm
- Pobrania
- 458
- Polubienia
- 279
- Ocena
- 4,75
P
Printablesvelix
WAVY vase mode flowerpot planter
Hi :) This is one of my vase mode plant pots. As part of my WAVY collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…
- Pobrania
- 449
- Polubienia
- 56
- Ocena
- 5
P
PrintablesTymyn_3D
flowerpot —> PARAMETRIC
How to change parameters? Model in the picture is printed in 0.32mm layer height. Seam position is aligned back . → because flowerpot is static object and no once will take it in hands and rotate it….sporadically. If you download f3d…
- Pobrania
- 444
- Polubienia
- 96
- Ocena
- 4,67
P
Printablesaiannazzone
Honeycomb Storage Wall Hooks for Anker PowerPort Speed 5
With these hooks, you can attach your Anker PowerPort Speed 5 (or other similarly-thick power hub) to your Honeycomb Storage Wall. From there, you can leave USB cables hanging in the cable hangers (see original model) and leave your…
- Pobrania
- 427
- Polubienia
- 123
- Ocena
- 5
P
PrintablesMileStorm
Rubber duck flowerpot
Just an easy remix of rubberduck, to make it fit some flowers, like cactus or tillandsia. It also has a excess water outlet in its butt. Some support to its beak is recommended…
- Pobrania
- 409
- Polubienia
- 106
- Ocena
- 0
P
PrintablesIndibles
Easter flowerpot decoration
Easter decoration for your flowers
- Pobrania
- 404
- Polubienia
- 77
- Ocena
- 5
P
PrintablesLeo
Flowerpot
A simple flowerpot in the shape of a sphere cut on both sides. This is a remix of my other model, differing in the shape of the outer decorative wall.
- Pobrania
- 399
- Polubienia
- 52
- Ocena
- 5
P
PrintablesSonniik
Slime Rancher Plort Statue Flowerpot
Slime statue flowerpot I made for my bonsai tree. I printed this one scaled to 120 %. Supports are recommended for the top part of the mouth (organic supports worked best for me). The plort should hold inside without glue. I printed mine…
- Pobrania
- 373
- Polubienia
- 87
- Ocena
- 4,33
P
Printablesmlax
Small flowerpot
I printed everything in PLA but every other material should also be okay. hope you like the model, give me your feedback in the comments. best regards mlax
- Pobrania
- 372
- Polubienia
- 37
- Ocena
- 0
P
Printablessteph3d
Cache-pot - flowerpot holder - planter
Hi ! There is a little something I designed for my girlfriend's office, I thought I could share it with you all ! Interior dimensions : 13cm width and 12 cm for the height of the hole. I recommend a 0.8mm nozzle and a line widht of 1mm,…
- Pobrania
- 349
- Polubienia
- 52
- Ocena
- 5
P
PrintablesVieWoy
Flower for flowerpot
Little decoration for flowerpots. For design changes there is .step file. Flower that will survive your behave. Water not needed. Bloom all the time in a year. Print Settings Rafts: No Supports: No Category: Decor
- Pobrania
- 345
- Polubienia
- 44
- Ocena
- 5
P
PrintablesRed Haniwa
Anderson Powerpole small panel mount
A small but full-featured panel mount for Anderson Powerpole (15, 30 and 40a version). Come with a cutout template so you can use it to mark where to cut and drill on your panel. There's a hole in the middle for securing Powerpole…
- Pobrania
- 344
- Polubienia
- 53
- Ocena
- 5
P
PrintablesJakub
Hanging flowerpot
Hanging flowerpot for small overhanging flowers with integrated base. Flowerpot is 60 mm in diameter. No supports are required. Waterproof when printed with generic PLA, 0.15 mm layer and 0.4 mm nozzle.
- Pobrania
- 343
- Polubienia
- 178
- Ocena
- 5
P
Printablesmlax
Bubble Flowerpot/Pencil holder
Print it with your normal settings.
- Pobrania
- 321
- Polubienia
- 94
- Ocena
- 5
P
PrintablesSeb D
Flowerpot Vase 01
Tested on a 0.15mm layer height and 0.4 nozzle and vase mode. Other settings can easily be used and scaling in the slicer will work like a charm. Step file included for remixes !
- Pobrania
- 311
- Polubienia
- 67
- Ocena
- 5
P
Printablestrevor229
50A Anderson PowerPole Protective Cap
Took measurements of a 50A connector and basically remade it with divets instead of pins and a small ramp on the inside to make disconnection a bit easier on the plastic. It fits quite tight in there, about as tight as another connector…
- Pobrania
- 300
- Polubienia
- 24
- Ocena
- 5
P
PrintablesSwiftyTheFox
Parametric Fused Anderson Powerpole Distributor
My take on a Anderson Powerpole distributor. The supplied stl files give you some options, but you can use the supplied OpenSCAD file if you want to increase the number of plugs. Part list: automotive fuses fuse clamps ("cable shoes")…
- Pobrania
- 300
- Polubienia
- 63
- Ocena
- 0
P
PrintablesOtter Ryrie
Flowerpot "Dead Man's Space Garden"/ Цветочный горшок "Космический сад мертвеца"
There are two versions of the model in the archive/ В архиве есть две версии модели. Printed on Flying bear 1s/Напечатано на Flying bear 1s Material/ материал: PLA or ABS Layer height/высота слоя: 0.2 Nozzle diameter/сопло: 0.4 My boosty:…
- Pobrania
- 294
- Polubienia
- 165
- Ocena
- 5
P
PrintablesAmyRayn
Modern Flowerpot
Wenn Sie nicht selbst drucken möchten, können Sie auch direkt auf meinem Etsy-Shop bestellen: https://designdruckbymd.etsy.com/de/listing/1679554200/blumentopf-6cm-3d-gedruckt-arches
- Pobrania
- 290
- Polubienia
- 71
- Ocena
- 0
P
Printablesncsandor
Pyrite Flowerpot #2 with Tray
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 Seam Position: Aligned For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before…
- Pobrania
- 287
- Polubienia
- 57
- Ocena
- 5
P
PrintablesNikdfish
Fused Anderson Powerpole supply block
01/29/2023 - added 4 connector version - added pics showing flexible wire use and battery connector (nickel plated steel) buss bars. The model has two parts, the block & the cover. The block has slots for ¼" female quick disconnects (used…
- Pobrania
- 283
- Polubienia
- 65
- Ocena
- 0
P
Printablesdtxtr
SOG Powerpint Thumb Bar
Since I couldn't find a matching thumb bar, I reengineered one that follows nicely the curve of the notch. I printed it in PETG with a brim and used a cutter and a bit of sanding to give it a bit of a chamfer. You can use a dab of super…
- Pobrania
- 281
- Polubienia
- 22
- Ocena
- 5
P
PrintablesIndibles
Easter spring flowerpot decoration
Spring decoration for your flowers
- Pobrania
- 276
- Polubienia
- 75
- Ocena
- 5
P
Printablesnotspelledright
Bosch Powerpack 500 Battery Wall Mount (side view)
Same rough design as the original model, except that the screw holes were resized and moved. Print it and mount it to the wall with some anchors! Additional pass-through holes are provided you let you get a screwdriver in to access the…
- Pobrania
- 272
- Polubienia
- 19
- Ocena
- 5
P
PrintablesK-PrintCreations
Flowerpot coaster / 21 sizes
DE: Ein Untersetzer für Blumentöpfe in verschiedensten Größen. EN: A coaster for planters in different sizes.
- Pobrania
- 269
- Polubienia
- 50
- Ocena
- 5
P
Printablesmstejska
Flowerpot
Internal dimensions are: 80 mm bottom 100 mm top 75 mm depth
- Pobrania
- 266
- Polubienia
- 31
- Ocena
- 5
P
Printableseponra
Pinksie the Whale - Flowerpot 65mm
I stumbled about that Whale Tealight Holder, and found that to be ideal for a planter pot if the potpart would be a tad bigger. So i edited this in Tinkercad, and thats what came out of this! Print instructions Category: Containers Print…
- Pobrania
- 265
- Polubienia
- 59
- Ocena
- 4,5
P
PrintablesJesse
SOG PowerPint Thumb Bar Tabs Flick Stick
3d printed inserts to fit into the SOG PowerPint multi-tool. Press in place using plyers and glue using cyanoacrylate (super/crazy) glue. Print at 0.2mm layer height using a 0.4mm nozzle. 0.6mm nozzle will also probably work. Several…
- Pobrania
- 261
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDee
Anderson Powerpole Shroud
This is a shroud for the 15/30/45 amp series of Anderson Powerpole connectors. There are two files: One with a 0.24" cable opening, and one with a 0.16" cable opening. Both are included so you can drill out the size cable you need. I'd…
- Pobrania
- 261
- Polubienia
- 53
- Ocena
- 0
P
PrintablesLeo
Flowerpot
A simple ball-shaped pot with decorative round holes. While creating it, I was inspired a bit by a golf ball. The model consists of two walls connected at the top and bottom: the inner pot, and the outer one, which has a decorative…
- Pobrania
- 259
- Polubienia
- 43
- Ocena
- 5
P
Printablesg7kse
Flowerpot antenna
A handy coil and base for your new best 2m antenna A bit of a description is here Please tweak and optimise. Be careful with whatever you sleeve the co-ax for RF absorption. Even some fairly simple stuff like fibreglass will have some…
- Pobrania
- 259
- Polubienia
- 45
- Ocena
- 5
P
PrintablesThump2010
Ham Radio Dual PowerPole with USB "Juicebox"
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
- Pobrania
- 254
- Polubienia
- 84
- Ocena
- 5
P
Printablesfaw3b
Flowerpot Low Poly Large
Inner Diameter: 132mm Outer Diameter: 160mm Heigth: 140mm Printed with Prusament PLA Blend Viva La Bronze
- Pobrania
- 250
- Polubienia
- 37
- Ocena
- 5
P
PrintablesTymyn_3D
Flowerpot-Knurling texture
If you have size requirement, let me know and i will do it. Flowerpot with Knurling texture, which is used on gun grip. Need 35 metres of filament. Printed from Prusament PETG Jet Black. If you print it, let me know in comments.
- Pobrania
- 247
- Polubienia
- 59
- Ocena
- 5
P
PrintablesSouky1122
Smile Flowerpot
a cute smile flowerpot that you can resize as you like. happy printing! printed 0,24mm 2 perimetres
- Pobrania
- 240
- Polubienia
- 57
- Ocena
- 5
P
PrintablesLišák
Self watering flowerpot
As I am one of the person, who always forget to water the flower or plant, I designed simple selfwatering flowerpot for my chilli plants. Print instructions I recommend printing it from PETG to have it watertight. Printable on Prusa MINI…
- Pobrania
- 238
- Polubienia
- 49
- Ocena
- 0
P
PrintablesLeo
Flowerpot
Simple flowerpot. Well, maybe not very simple, but it has an interesting shape. The photo shows a PETG print, 0.3 mm layer. It was test print, therefore the quality is poor. I suggest you print with a 0.2 layer. The flowerpot consists of…
- Pobrania
- 237
- Polubienia
- 42
- Ocena
- 5
P
PrintablesZneuzity
Flowerpot kettle - remixed into a functional teapot kettle + lid
Remixed it for my daughter to be used as toy in a small kitchen I just create a brand new lid and add hole. Original was much bigger than mine. Can be printed without any support.
- Pobrania
- 237
- Polubienia
- 18
- Ocena
- 0
P
PrintablesEvroc
Flowerpot with drain
Hello guys. It's a simple flowerpot with a drain. It can be used for different kinds of plants. I suggest you put some small stones on the stand before planting anything. Hope you like it. :) Update: As someone mentioned - I added the…
- Pobrania
- 237
- Polubienia
- 35
- Ocena
- 5
P
Printableskdsjr
Anker PowerPort Atom III USB C hub holder
Based on design for other anker USB hub. I attach this using command strips but added a version with holes for M3 countersunk screws as well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20…
- Pobrania
- 236
- Polubienia
- 31
- Ocena
- 4,89
P
PrintablesJangy
Blossom Powerpuff Girls
Blossom Powerpuff Girls You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures
- Pobrania
- 227
- Polubienia
- 14
- Ocena
- 0
P
Printablesncsandor
Sunny House Flowerpot with Tray
Flowerpot and tray inspired by the unique sunny houses in Szeged. (In Hungarian: "Napsugaras ház") Unfortunately, there are fewer and fewer of them, they will perish or disappear. From the rectangular opening depicting the eye of god, the…
- Pobrania
- 224
- Polubienia
- 54
- Ocena
- 5
P
PrintablesValentino Hesse
HEXA Flowerpot
Print set. PLA/PET-G Nozzle: 0.4 mm Layer: 0.2 mm Infill: 5-10 % Support: NO Speed: 40 mms (EN) Design flower pot for home and outdoor cultivation. It can be optionally enlarged or reduced. Be sure to upload print photos. (CZ) Designový…
- Pobrania
- 221
- Polubienia
- 41
- Ocena
- 5
P
PrintablesMatthijs
Behringer Powerplay P1 battery cover
The latch of the original cover is too flimsy and will break off easily. This replacement cover is not an identical copy (with the same problem), but uses a different latch spring concept. Since this lid will sit slightly deeper inside…
- Pobrania
- 219
- Polubienia
- 8
- Ocena
- 5
P
PrintablesStefan
Small Flowerpot / kleiner Blumentopf
Small flowerpot - size about 40x40x42mm - with drainage. Coaster optional. Looks best printed with fuzzy skin on outside walls. 15 flowerpots will fit in this plantcoaster 0.4 nozzle, 0.3 layer height, no supports, ~9 gram filament for…
- Pobrania
- 215
- Polubienia
- 10
- Ocena
- 4,5
P
Printablesmstejska
flowerpot with leaves
flower pot with leaves design dimensions: diameter 100mm height 100mm
- Pobrania
- 212
- Polubienia
- 43
- Ocena
- 0
P
PrintablesEvroc
Flowerpot with drain
Hello guys. For few months I am trying to grow succulents and other plants. Many pots there don't have any drain, so I've created one by myself. The pot consists of 2 parts as shown in the pictures. Don't forget to add small stones on the…
- Pobrania
- 204
- Polubienia
- 44
- Ocena
- 5
P
Printableshoeni
Anker Powerport holder (Powerport | PD)
I used simple double-sided tape to attach to the wall.
- Pobrania
- 202
- Polubienia
- 35
- Ocena
- 5
P
PrintablesMotbrok
Antwerp Historical Centre
A model of the historic centre of Antwerp. Extracted and polished from open map data provided by the city. You can prominently see some historic buildings such as the Cathedral and the KBC-tower that make up most of the relief in the…
- Pobrania
- 198
- Polubienia
- 20
- Ocena
- 0
P
Printablesvelix
LINES vase mode flowerpot planter
Hi :) This is one of my vase mode plant pots. As part of my LINES collection this is a very elegant way to present your plants. Find a fitting saucer, I use yoghurt cups that i cut up. For the sizing, this worked for me: if you have a 15…
- Pobrania
- 198
- Polubienia
- 38
- Ocena
- 5
P
PrintablesMike F.
Desk mount for Anker PowerPort 6 USB charger
I spend the last few days designing and developing a simple mount for my Anker PowerPort 6 USB charger because it took away too much space on my desk. So I decided to attach it to the side of my wooden desk. To design it I used Autodesk…
- Pobrania
- 194
- Polubienia
- 41
- Ocena
- 5
P
Printablestheworkshope
Anderson Powerpole Retention Clip
Prevent your Powerpole connectors from accidentally separating. The clip fits into the existing retention holes with a slip friction fit. Still removable by fingers thanks to a ridge on the clip, but will stay under vibration and normal…
- Pobrania
- 192
- Polubienia
- 14
- Ocena
- 5
P
PrintablesAlex
Anker PowerPort Atom III Slim Charger Under Desk Mount
Desk mount for a Anker PowerPort Atom III Slim Charger to be mounted under the table. The main goal was a tight fit for easy cable plugging and unplugging without any wiggling. Edit I made this model because there was none when I first…
- Pobrania
- 190
- Polubienia
- 24
- Ocena
- 5
P
PrintablesEvroc
Flowerpot with drain
Hello folks. The pot consists of 3 elements - the main part, the big and small roof. All parts are super easy to assemble, you don't need any glue - just a little push. The project has a pretty effective drain so you won't flood your…
- Pobrania
- 189
- Polubienia
- 47
- Ocena
- 0
P
PrintablesHeinsius
Logitech Powerplay Base
This is a base for logitech powerplay. The idea to tug in the powerplay tightly and cover it up with a larger desk pad without having any bumps, ledges or sharp corners. I provided the Fusion360 files so you can customize it to your…
- Pobrania
- 188
- Polubienia
- 11
- Ocena
- 0
P
Printables3DBASTI
PowerPole Einbaubuchse
PowerPole Einbaubuchse Universell
- Pobrania
- 187
- Polubienia
- 20
- Ocena
- 5
P
PrintablesDsk001
Powerpuff Girl Base for Wekster Figures
Powerpuff Girl Base for Wekster Figures Girl Figures not included The base can be printed in 3 ways Clouds Only Hearts Only Hearts + Clouds There are printed without support and the one in the picture was done without MMU (but MMU is…
- Pobrania
- 187
- Polubienia
- 44
- Ocena
- 0
P
Printablescmos
Wandhalter für Bosch eBike Akku Powerpack 500 | wall bracket for Bosch ebike battery "PowerPack 500"
Ladestecker passt exakt in den Halter, sodass der Akku beim einsetzen kontaktiert wird. | Charging plug fits exactly into the bracket so that the battery is contacted when inserted. In addition I used THIS model to fix the charter to the…
- Pobrania
- 187
- Polubienia
- 17
- Ocena
- 0
P
Printables3D Danukie
Powerpuff Girls keychain! 5 different characters! Follow Please!
Powerpuff Girls keychain! 5 different characters!
- Pobrania
- 183
- Polubienia
- 23
- Ocena
- 0
P
PrintablesPete_Radio
Anderson Powerpole Bulkhead Connector
This is an Anderson Powerpole connector designed to take two sets of connectors. It can be used for passing through a bulkhead up to 20mm thick. Includes Nut. This is the final competed model Fixes from previous models: Thread depth…
- Pobrania
- 182
- Polubienia
- 26
- Ocena
- 4
P
PrintablesBHainesUK
Anker PowerPort 6 Lite Holder
This is a holder with screw fittings for the Anker PowerPort 6 Lite USB charger. There are two files: original with 0.5mm play/gap between holder and PowerPort tighter fit with 0mm play/gap between holder and PowerPort Original OnShape…
- Pobrania
- 182
- Polubienia
- 22
- Ocena
- 4,5
P
Printablespmichaud
Keystone adapter for PowerPole connectors
This is a keystone adapter to mount Anderson PowerPole connectors into a keystone jack. My printers have 0.6mm nozzles, so I print these using 0.4mm layer height and 100% infill. For smaller nozzles a 0.3mm or 0.2mm layer height will…
- Pobrania
- 181
- Polubienia
- 31
- Ocena
- 5
P
PrintablesRickEpidemia
Macetero / Flowerpot
Maceta sus medidas son 16 centimetros de diametro y 15 centimetros de altura. Flowerpot measures 16 centimeters in diameter and 15 centimeters in height
- Pobrania
- 181
- Polubienia
- 12
- Ocena
- 5
P
PrintablesCarlos Luna
Vase Mode Flowerpot
A simple geometric flowerpot that can be printed in vase mode. I made it basically so I can put in practice a particular design technique with OpenScad (twisted extrusion). You can use the highly customizable script to create your own…
- Pobrania
- 175
- Polubienia
- 20
- Ocena
- 0
P
PrintablesValentino Hesse
Flowerpot
Flowerpot - PLA !!!! FOR RESIZE - POD MUST BY RESIZED FOR FLOR POD !!!! PLA NO SUPPORT INFIL 10-20% Post-Printing Category: Decor
- Pobrania
- 174
- Polubienia
- 24
- Ocena
- 5
P
PrintablesSpectre338
Anderson Powerpole Panel Mount
Anderson Powerpole Panel Mount – Rear Insertion with Backer / Template This custom-designed panel mount provides a secure and professional installation solution for standard Anderson Powerpole connectors. Designed for front panel mount…
- Pobrania
- 173
- Polubienia
- 28
- Ocena
- 5
P
PrintablesMysstra3dart
Chinese dragon flowerpot
Chinese dragon flowerpot
- Pobrania
- 172
- Polubienia
- 38
- Ocena
- 0
P
PrintablesSoul
Flowerpot
A simple Planter with or without Holes. 100 mm height Top: 128 mm ⌀* Bottom: 120 mm ⌀* *Diameter for long axis of the hexagon.
- Pobrania
- 165
- Polubienia
- 8
- Ocena
- 0
P
Printablesfaw3b
Flowerpot Low Poly Small
Inner Diameter: 90 mm Outer Diameter: 110 mm Heigth: 100 mm The middle and the large version are available at Printables as well. Large: https://www.printables.com/de/model/354099-flowerpot-low-poly-large Middle:…
- Pobrania
- 164
- Polubienia
- 17
- Ocena
- 4