33 modeli
.22 Winchester Magnum Rimfire, also known as .22 WMR or .22 Magnum, is a rimfire firearm cartridge designed in the United States of America by Winchester in 1959. Print this for props, display, education, training, just because it's cool,…
This is a sliding lid box for holding 50 rounds of 22WMR rimfire ammo, similar to my previous 100 round 22LR Bullet Holder . No special instructions other than using a 0.2500" reamer (preferred) or a 1/4" drill bit (works as well, just…
These are the part to make a 22 WMR magazine. The only other thing that you will need is a spring from a CMMG 25 round 22lr conversion for a AR. Infill on mag is 30 and the other parts are 100 at .2 layer height. The follower has been…
cover for the Weller WMRP Soldering iron stand
Ok, so this took me a while to get right and still mistakes were made and let me warn you, it is a bit tricky to put together but I did have fun with it and so I hope you do too. Version 1 can be found on my Patreon (link below,…
Taller box and lid for more longer cartridges. Green in the render indicates the new files from here, the grey parts are original and should be grabbed from the OG page. UPDATE 4/10: Corrected dimensions off a physical .22WMR case instead…
This will only work for the .17hmr and 22WMR models only. I designed it to fit my .17hmr and I believe it should work for the 22WMR as well but I can not confirm that. Let me know if it does not work. WILL NOT FIT THE .22lr MODELS. For…
a stand for the RT series (WMRP series) soldering iron. can hold 2 extra tips. If needed, weigh it down with some steel or lead sheet. Sponge: search for T0052242099…
A simple wallmount for Windows Mixed Reality Controllers. No screws needed. Goes along with my remixed WMR Virtual Reality Headset Mount
WMRP & WMRT Solder Iron Holder Base printed in PLA Holder parts printed in resin Rod made from 6mm² copper wire More information about this board:…
I have wanted a pair of controller grips for my WMR-controllers, to play BeatSaber with, but there just wasn't any available online. So, I designed and printed my own. I designed them in Fusion 360 and later printed them on my Ender 3…
WMRT & WMRP Controller Enclosure Printed in PLA Front is a piece of black mirror transparent plexi. Iron holder is are seperate files. Check: Button is this one:…
5 round Quick Strip for your 22WMR ammunition. I made this for my 22WMR/.410 over/under to more efficiently hold ammo in the stock bag when I'm out hunting and/or when I'm out shooting. Printed out of Sunlu TPU Silk(98A) on an Elegoo…
Simple hook to hang WMR controllers (Samsung HMD Odyssey+ at least) under your desk. Hard to screw in :/ but does work.
This is a set of mounts to use add an HTC Vive strap to my HP Mixed Reality Headset You are also going to need to print 2 of the HTC Vive Headset Buckle by sheepslinky: https://www.thingiverse.com/thing:2008830 This is the buckle to…
Remix of: https://www.thingiverse.com/thing:4253573 The dimensions of the original thing are not matching my controller. Others reported similar problems. Changes made: Extended gap to 42mm Shrunk clip height to 6.5mm Print Settings…
I made this to hold onto the LED ring part of the Windows MR controller. This makes it so I can hang the two controllers on my desk. Should work for other places you might want to put it as well as long as the width is less than 16.5mm.…
I have a WMR headset - a Samsung Odyssey+ - and I recently had to crack open the controllers and headset. The plan was to model a replacement faceplate and measure dimensions of the headset itself. Unfortunately life happened and I was…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This is just a 100 round version of my 50 round 22WMR ammo box / bullet holder. Since I didn't print any of these, I don't have any photos. The parts should fit since I extrapolated them from the 50 round box. Please let me know if there…
Zásobník pro CZ457 ráže .22WMR/.17HMR. Jsou dvě verze podložky, jedna která k uzamčení potřebuje původní kolík s pružinou a druhá která má možnost použití destičky k uzamčení. Pružinu použijte tu stejnou co využívá zásobník pro .22LR.…
Replacement for a lost Weller WMRP soldering iron rest with magnet standby function. Print instructions Category: Tool Holders & Boxes Summary Replacement for a lost Weller WMRP soldering iron rest with magnet standby function.…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
The Snug Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. The thinness of the Snug box top…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch Look in my Ammo Boxes Collection…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
